Page 3 of 480

GENERAL MOTORS, GM, the GM Emblem, CADILLAC,the CADILLAC Crest & Wreath, and the name DTSare registered trademarks of General MotorsCorporation.
This manual describes features that may or may not beon your specific vehicle either because they are optionsthat you did not purchase or due to changes subsequentto the printing of this owner manual. Please refer to thepurchase documentation relating to your specific vehicleto confirm each of the features found on your vehicle. Forvehicles first sold in Canada, substitute the name“General Motors of Canada Limited” for Cadillac MotorDivision wherever it appears in this manual.
Keep this manual in the vehicle for quick reference.
Canadian Owners
Propriétaires Canadiens
A French language copy of this manual can be obtainedfrom your dealer/retailer or from:
On peut obtenir un exemplaire de ce guide en françaisauprès du concessionnaire ou à l’adresse suivante:
Helm, IncorporatedP.O. Box 07130Detroit, MI 48207
1-800-551-4123
Numéro de poste 6438 de langue française
www.helminc.com
Index
To quickly locate information about the vehicle, use theindex in the back of the manual. It is an alphabeticallist of what is in the manual and the page number whereit can be found.
Litho in U.S.A.Part No. 25897010 A First Printing©2009 General Motors Corporation. All Rights Reserved.
iii
Page 246 of 480

WASHER FLUID LOW ADD FLUID
This symbol appears withthis message.
This message displays when your vehicle is low onwindshield washer fluid. Refill the windshield washerfluid reservoir as soon as possible. SeeWindshieldWasher Fluid on page 6-31for more information.
DIC Vehicle Customization
Your vehicle has customization capabilities that allowyou to program certain features to one preferred setting.Customization features can only be programmed toone setting on the vehicle and cannot be programmedto a preferred setting for two different drivers.
All of the customization options may not be available onyour vehicle. Only the options available will bedisplayed on the DIC.
The default settings for the customization features wereset when your vehicle left the factory, but may havebeen changed from their default state since then.
The customization preferences are automaticallyrecalled.
To change customization preferences, use the followingprocedure.
Entering the Feature Settings Menu
1. Turn the ignition on and place the vehicle inP (Park).
To avoid excessive drain on the battery, it isrecommended that the headlamps are turned off.
2. Press the customization button to enter the featuresettings menu.
If the menu is not available, FEATURE SETTINGSAVAILABLE IN PARK will display. Before enteringthe menu, make sure the vehicle is in P (Park).
Feature Settings Menu Items
The following are customization features that allow youto program settings to the vehicle:
DISPLAY IN ENGLISH
This feature will only display if a language other thanEnglish has been set. This feature allows you to changethe language in which the DIC messages appear toEnglish.
4-80
Page 247 of 480

Press the customization button until the PRESSVTO
DISPLAY IN ENGLISH screen appears on the DICdisplay. Press the set/reset button once to display allDIC messages in English.
DISPLAY LANGUAGE
This feature allows you to select the language in whichthe DIC messages will appear.
Press the customization button until the DISPLAYLANGUAGE screen appears on the DIC display. Pressthe set/reset button once to access the settings forthis feature. Then press the menu up/down button toscroll through the following settings:
ENGLISH (default):All messages will appear inEnglish.
DEUTSCH:All messages will appear in German.
FRANCAIS:All messages will appear in French.
ESPANOL:All messages will appear in Spanish.
JAPANESE:All messages will appear in Japanese.
ARABIC:All messages will appear in Arabic.
NO CHANGE:No change will be made to this feature.The current setting will remain.
To select a setting, press the set/reset button while thedesired setting is displayed on the DIC.
AUTO DOOR LOCK
This feature allows you to select when the vehicle’sdoors will automatically lock. SeeProgrammableAutomatic Door Locks on page 3-10for moreinformation.
Press the customization button until AUTO DOORLOCK appears on the DIC display. Press the set/resetbutton once to access the settings for this feature.Then press the menu up/down button to scroll throughthe following settings:
SHIFT OUT OF PARK (default):The doorsautomatically lock when the doors are closed and thevehicle is shifted out of P (Park).
AT VEHICLE SPEED:The doors automatically lockwhen the vehicle speed is above 5 mph (8 km/h)for three seconds.
NO CHANGE:No change will be made to this feature.The current setting will remain.
To select a setting, press the set/reset button while thedesired setting is displayed on the DIC.
4-81