2010 CADILLAC DTS wheel

ALL (default):The driver’s seat and the steering wheeltilt and steering column telescope features will recall,if your vehicle has this option.
NO CHANGE:No change will be made to this feature.The current setting will remain.
To select a setting, press the set/reset button while thedesired setting is displayed on the DIC.
MEMORY SEAT RECALL
If your vehicle has this feature, it allows you to selectyour preference for the remote memory seat recallfeature. SeeMemory Seat, Mirrors and Steering Wheelon page 2-6for more information.
Press the customization button until MEMORY SEATRECALL appears on the DIC display. Press the set/resetbutton once to access the settings for this feature.Then press the menu up/down button to scroll throughthe following settings:
OFF (default):No remote memory seat recall will occur.
ON:The driver’s seat and outside mirrors willautomatically move to the stored driving position whenthe unlock button on the Remote Keyless Entry(RKE) transmitter is pressed. The steering column willalso move on vehicles with the power tilt and telescopicsteering feature. SeePower Tilt Wheel and TelescopicSteering Column on page 4-4for more information.
See “RELEARN REMOTE KEY” underDIC Operationand Displays on page 4-62for more information onmatching transmitters to driver ID numbers.
NO CHANGE:No change will be made to this feature.The current setting will remain.
To select a setting, press the set/reset button while thedesired setting is displayed on the DIC.
REMOTE START
If your vehicle has this feature, it allows you to turn theremote start off or on. The remote start feature allowsyou to start the engine from outside of the vehicle usingthe Remote Keyless Entry (RKE) transmitter. SeeRemote Vehicle Start on page 3-7for more information.
Press the customization button until REMOTE STARTappears on the DIC display. Press the set/reset buttononce to access the settings for this feature. Then pressthe menu up/down button to scroll through the followingsettings:
OFF:The remote start feature will be disabled.
ON (default):The remote start feature will be enabled.
NO CHANGE:No change will be made to thisfeature. The current setting will remain.
To select a setting, press the set/reset button while thedesired setting is displayed on the DIC.
4-87

Finding a Station
BAND:Press to switch between AM, FM, or XM™.The selection displays.
a(Tune):Turn to select radio stations.
©SEEK¨:Press the arrows to go to the next or to
the previous station and stay there.
To scan stations, press and hold either arrow forthree seconds until a beep sounds. The radio goes to astation, plays for a few seconds, then goes to thenext station. Press either arrow again to stop scanning.
The radio only seeks and scans stations with astrong signal that are in the selected band.
4(Information) (XM™ Satellite Radio Service,
MP3/WMA, and RDS Features):Press this button todisplay additional text information related to thecurrent FM-RDS or XM station, or MP3/WMA song. Achoice of additional information such as: Channel, Song,Artist, CAT (category) can display. Continue pressingthe information button to highlight the desired label,or press the pushbutton positioned under any one of thetabs and the information about that tab displays.
When information is not available, No Info displays.
Storing a Radio Station as a Favorite
Drivers are encouraged to set up their radio stationfavorites while the vehicle is in P (Park). Tune to favoritestations using the presets, favorites button, andsteering wheel controls, if the vehicle has this feature.SeeDefensive Driving on page 5-2.
FAV (Favorites):A maximum of 36 stations can beprogrammed as favorites using the six pushbuttonspositioned below the radio station frequency tabs andby using the radio favorites page button. Press theFAV button to go through up to six pages of favorites,each having six favorite stations available per page.Each page of favorites can contain any combination ofAM, FM, or XM stations. To store a station as afavorite:
1. Tune to the desired radio station.
2. Press the FAV button to display the page whereyou want the station stored.
3. Press and hold one of the six pushbuttons until abeep sounds. When that pushbutton is pressedand released, the station that was set, returns.
4. Repeat the steps for each pushbutton radio stationyou want stored as a favorite.
4-94

Bluetooth Controls
Use the buttons located on the steering wheel tooperate the in-vehicle Bluetooth system. SeeAudioSteering Wheel Controls on page 4-119for moreinformation.
bg(Push To Talk):Press to answer incoming calls,
to confirm system information, and to start speechrecognition.
cx(Phone On Hook):Press to end a call, reject a
call, or to cancel an operation.
Pairing
A Bluetooth enabled cell phone must be paired to thein-vehicle Bluetooth system first and then connected tothe vehicle before it can be used. See the cell phonemanufacturers user guide for Bluetooth functions beforepairing the cell phone. If a Bluetooth phone is notconnected, calls will be made using OnStar®Hands-FreeCalling, if available. Refer to the OnStar owner’s guide formore information.
Pairing Information:
•Up to five cell phones can be paired to the in-vehicle
Bluetooth system.
•The pairing process is disabled when the vehicle
is moving.
•The in-vehicle Bluetooth system automatically links
with the first available paired cell phone in theorder the phone was paired.
•Only one paired cell phone can be connected to the
in-vehicle Bluetooth system at a time.
•Pairing should only need to be completed once,
unless changes to the pairing information havebeen made or the phone is deleted.
To link to a different paired phone, see Linking to aDifferent Phone later in this section.
Pairing a Phone
1. Press and holdbgfor two seconds. The system
responds with “Ready” followed by a tone.
2. Say “Bluetooth”. The system responds with“Bluetooth ready” followed by a tone.
3. Say “Pair”. The system responds with instructionsand a four digit PIN number. The PIN number willbe used in Step 4.
4. Start the Pairing process on the cell phone that willbe paired to the vehicle. Reference the cell phonemanufacturers user guide for information onthis process.
4-109

Theft-Deterrent Feature
THEFTLOCK®is designed to discourage theft of thevehicle’s radio by learning a portion of the VehicleIdentification Number (VIN). The radio does not operateif it is stolen or moved to a different vehicle.
Audio Steering Wheel Controls
Vehicles with audiosteering wheel controlscould differ depending onthe vehicle’s options.Some audio controls canbe adjusted at thesteering wheel.
w(Next):Press to go to the next radio station stored
as a favorite, or the next track if a CD/DVD is playing.
cx(Previous/End):Press to go to the previous
radio station stored as a favorite, the next track ifa CD/DVD is playing, to reject an incoming call, or enda current call.
bg(Mute/Push to Talk):Press to silence the vehicle
speakers only. Press again to turn the sound on.
For vehicles with Bluetooth or OnStar®systems pressand hold for longer than two seconds to interactwith those systems. SeeBluetooth®on page 4-108orthe OnStar Owner’s Guide for more information.
SRCE (Source):Press to switch between the radio(AM, FM, XM), CD, and for vehicles with, DVD,front auxiliary, and rear auxiliary.
For vehicles with the navigation system, press and holdthis button for longer than two seconds to initiatevoice recognition. See “Voice Recognition” in theNavigation System manual for more information.
+e!e(Volume): Press to increase or to decrease
the radio volume.
¨(Seek):Press to go to the next radio station while
in AM, FM, or XM™. Press¨to go to the next
track or chapter while sourced to the CD or DVD slot.
Press the¨if multiple discs are loaded to go to
the next disc while sourced to a CD player.
4-119

Keeping pace with the traffic and allowing realisticfollowing distances eliminates a lot of unnecessarybraking. That means better braking and longer brake life.
If the engine ever stops while the vehicle is being driven,brake normally but do not pump the brakes. If the brakesare pumped, the pedal could get harder to push down.If the engine stops, there will still be some power brakeassist but it will be used when the brake is applied. Oncethe power assist is used up, it can take longer to stop andthe brake pedal will be harder to push.
Adding non-dealer/non-retailer accessories can affectvehicle performance. SeeAccessories and Modificationson page 6-3.
Antilock Brake System (ABS)
This vehicle has the Antilock Brake System (ABS), anadvanced electronic braking system that helps prevent abraking skid.
When the engine is started and the vehicle begins todrive away, ABS checks itself. A momentary motoror clicking noise might be heard while this test is goingon, and it might even be noticed that the brake pedalmoves a little. This is normal.
If there is a problem withABS, this warning lightstays on. SeeAntilockBrake System (ABS)Warning Light onpage 4-53.
Let us say the road is wet and you are driving safely.Suddenly, an animal jumps out in front of you. You slamon the brakes and continue braking. Here is whathappens with ABS:
A computer senses that the wheels are slowing down.If one of the wheels is about to stop rolling, the computerwill separately work the brakes at each front wheeland at both rear wheels.
ABS can change the brake pressure to each wheel, asrequired, faster than any driver could. This can helpthe driver steer around the obstacle while braking hard.
As the brakes are applied, the computer keepsreceiving updates on wheel speed and controls brakingpressure accordingly.
Remember: ABS does not change the time needed to geta foot up to the brake pedal or always decrease stoppingdistance. If you get too close to the vehicle in front of you,there will not be enough time to apply the brakes if thatvehicle suddenly slows or stops. Always leave enoughroom up ahead to stop, even with ABS.
5-4

The TCS/StabiliTrak warning light on the instrumentpanel cluster will flash when the system is operating.SeeTraction Control System (TCS) Warning Lighton page 4-54andStabiliTrak®Indicator Light onpage 4-54for more information. The system may beheard or felt while it is working. This is normal.
The SERVICE STABILITRAK message is displayed andthe TCS/StabiliTrak warning light on the instrumentpanel cluster comes on if there is a problem with thesystem. When this light and the SERVICESTABILITRAK message are on, the system is notworking. Adjust your driving accordingly.
Traction Control System (TCS)
The vehicle has a Traction Control System (TCS) thatlimits wheel spin. This is especially useful in slippery roadconditions. The system operates only if it senses that thefront wheels are spinning too much or beginning to losetraction. When this happens, the system works the frontbrakes and reduces engine power (by closing the throttleand managing engine spark) to limit wheel spin.
The TCS and StabiliTrak®
light will flash when thesystem is limitingwheel spin.
The system may be heard or felt while it is working, butthis is normal. SeeTraction Control System (TCS)Warning Light on page 4-54for more information.
If the vehicle is in cruise control when TCS begins tolimit wheel spin, the cruise control will automaticallydisengage. The cruise control may be re-engaged whenroad conditions allow. SeeCruise Control on page 4-12.
The SERVICE TRACTION CONTROL message inthe DIC and the TCS/StabiliTrak warning light comes onif there is a problem with the traction control system.SeeDIC Warnings and Messages on page 4-67.
When this light and the SERVICE TRACTIONCONTROL message are on, the system will not limitwheel spin. Adjust your driving accordingly.
5-6

To turn the system off oron, press and release thisbutton located in frontof the shift lever.
TCS automatically comes on whenever the vehicle isstarted. To limit wheel spin, especially in slipperyroad conditions, always leave the system turned on.TCS can be turned off if needed.
The system can be turned on or off at any time bypressing the TCS button. The DIC will displayTRACTION CONTROL OFF when the button is pressed,and part of the traction control system is disabled.The vehicle will still have brake-traction control, but willnot be able to use the engine speed managementsystem. System noises may be heard as a result of thebrake-traction control working. If the controller detectsexcessive wheel spin in this mode, the TCS/StabiliTraklight may blink.
It is recommended to leave the system on for normaldriving conditions, but it may be necessary to turnthe system off if the vehicle is stuck in sand, mud, ice orsnow, and you want to “rock” the vehicle to attempt tofree it. SeeIf Your Vehicle is Stuck in Sand, Mud, Ice, orSnow on page 5-17.
Adding non-dealer/non-retailer accessories can affectthe vehicle’s performance. SeeAccessories andModifications on page 6-3for more information.
Magnetic Ride Control™
The vehicle may have Magnetic Ride Control thatautomatically adjusts the ride of the vehicle. Thecontroller receives input from the system to determinethe proper ride. If the controller detects a problem withinthe system, the Driver Information Center (DIC)displays a SERVICE SUSPENSION SYS message.SeeDIC Warnings and Messages on page 4-67for more information. If this message appears, have thevehicle serviced at your dealer/retailer.
Electronically Controlled Air Ride
Suspension
Professional Vehicles may have Electronically ControlledAir Suspension. The air ride controller receives inputfrom the system to determine the proper ride. Ifthe controller detects a problem with the system, theDIC will display a SERVICE SUSPENSION SYSmessage. If this message appears, have the vehicleserviced at your dealer/retailer.
5-7

Steering
Power Steering
If power steering assist is lost because the engine stopsor the system is not functioning, the vehicle can besteered but it will take more effort.
Magnetic Speed Variable Assist
Steering System
This system continuously adjusts the effort felt whensteering at all vehicle speeds. It provides easewhen parking, yet a firm, solid feel at highway speeds.
Steering Tips
It is important to take curves at a reasonable speed.
Traction in a curve depends on the condition of the tiresand the road surface, the angle at which the curve isbanked, and vehicle speed. While in a curve, speed isthe one factor that can be controlled.
If there is a need to reduce speed, do it before enteringthe curve, while the front wheels are straight.
Try to adjust the speed so you can drive through thecurve. Maintain a reasonable, steady speed. Waitto accelerate until out of the curve, and then accelerategently into the straightaway.
Steering in Emergencies
There are times when steering can be more effectivethan braking. For example, you come over a hill and finda truck stopped in your lane, or a car suddenly pullsout from nowhere, or a child darts out from betweenparked cars and stops right in front of you. Theseproblems can be avoided by braking — if you can stopin time. But sometimes you cannot stop in timebecause there is no room. That is the time for evasiveaction — steering around the problem.
The vehicle can perform very well in emergencies likethese. First apply the brakes. SeeBraking on page 5-3.It is better to remove as much speed as possiblefrom a collision. Then steer around the problem, to theleft or right depending on the space available.
5-8