Connect plug5.
Seat the intake air pipe inmount4.
Seat the intake air pipe inguides7of the air filterhousing. Take care not tobend the rubber seals of the airfilter element out of shape.
Install connecting flange2.
Install two screws1.
Install the right side panel(97).
Jump starting
The wires leading to thepower socket do not havea load-capacity rating adequatefor jump-starting the engine. Ex-cessively high current can leadto a cable fire or damage to thevehicle electronics.
Do not use the on-board socketto jump-start the engine of themotorcycle.
A short-circuit can res-ult if the crocodile clipsof the jump leads are accident-ally brought into contact with themotorcycle.
Use only jump leads fitted withfully insulated crocodile clips atboth ends.
8
92
zMaintenance
