Mobility
227Reference
At a glance
Controls
Driving tips
Communications
Navigation
Entertainment
4.Screw dust cap off valve of defective wheel
and screw filling hose2 of sealant bottle
onto valve.
5.Insert sealant bottle on compressor hous-
ing so that it is positioned upright.
6.Make sure that the device is switched off,
position 0.
7.Insert connector3 into lighter socket in
vehicle interior, refer to page109.
8.With the ignition switched on:
Switch on the device and allow to run for
approx. 3 minutes to fill wheel with sealant.
It is not important what inflation pressure
the tire has after filling.
9.Switch off device.
10.Remove connecting hose from connection
of sealant bottle and tire valve.
Stow the M Mobility System in the vehicle
again.
Distributing sealant
Immediately drive approx. 2 miles/3 km so that
sealant is evenly distributed in tire.
Do not exceed a maximum speed of
35 mph/60 km/h. Do not drop below
12 mph/20 km/h if possible.<
Producing tire inflation pressure
1.After approx. 2 miles/3 km, stop at suitable
location.
2.Screw compressor hose9 directly onto tire
valve.
3.Insert connector 3 in lighter socket in vehi-
cle interior.4.Correct tire inflation pressure to 29 psi/
200 kPa. With the ignition switched on:
>Increase inflation pressure: switch on
compressor, position I. To check cur-
rently set inflation pressure, briefly
switch off device.
Do not allow compressor to run
longer than 10 minutes, otherwise
the device will overheat and may be dam-
aged.<
>Reduce inflation pressure: press
button8 or turn screw8 on pressure
gauge.
If the inflation pressure is not held, drive
the vehicle again, refer to Distributing
sealant. Then repeat steps 1 to 4 once.
Using the M Mobility System can be ineffective
in the event of tire damage greater than
approx. 0.16 in/4 mm in size. Please contact the
nearest BMW center, refer to page232, or a
workshop that works according to BMW repair
procedures with correspondingly trained per-
sonnel if the tire cannot be made ready for driv-
ing with the M Mobility System.<
The tire inflation pressure must be at least
29 psi/200 kPa. Otherwise do not con-
tinue driving.<
Continue driving
Do not exceed the permissible maximum
speed of 50 mph/80 km/h, otherwise
accidents can occur.<
Reinitialize the Flat Tire Monitor.
For details, refer to page84.
Have the defective tire and the sealant bottle of
the M Mobility System replaced as soon as
possible.<
Changing wheels*
Safety precautions in the event of a flat
tire or wheel change: Park the vehicle as
far as possible from passing traffic and on solid
ground. Switch on the hazard warning flashers.
Apply the handbrake and shift into first gear or
reverse with the manual transmission, or move
Everything from A to Z
260 Tires
– age205
– air loss85,86
– breaking-in116
– changing207
– condition206
– damage207
– flat tire, refer to Changing
wheels227
– inflation pressure204
– M Mobility System225
– new wheels and tires207
– pressure monitoring, refer to
Flat Tire Monitor84
– pressure monitoring, refer to
TPM Tire Pressure
Monitor85
– replacing227
– retreaded tires207
– size205
– tread206
– wear indicators206
– wheel/tire combination207
– winter tires208
Tire trouble
– changing wheels227
TMC station, refer to Traffic
information142
"Tone"151
Tone dialing method186
Tone in audio mode
– adjusting151
– middle setting153
Tone on locking/unlocking33
Tools, refer to Onboard
toolkit222
"Top 8" in mobile phone
mode184
Torque
– refer to Engine data238
Torque, lug bolts, refer to
After mounting229
Touch tone dialing, refer to
Tone dialing method186
Tow bar234
Tow fitting233Towing233
– methods234
– tow fittings233
– with manual
transmission234
– with Sequential Manual
Transmission234
– with Sequential Manual
Transmission with
Drivelogic234
"Town / City" in destination
entry127
Tow rope
234
Tow-starting233
"TPM"86
TPM Tire Pressure
Monitor85
– resetting system86
– system limits85
– warning lamp86
Tracks
– random sequence167
– sampling on CD166
– selecting with CD165
Traction control, refer to DSC
Dynamic Stability
Control81
Traffic information for
navigation
– depiction in route map144
– displaying143
– during destination
guidance145
– symbols144
Traffic information with
navigation142
"Traffic Info settings"143
Traffic jam
– displaying traffic
information142
– refer to Bypassing route
sections142Transmission
– breaking-in116
– Drivelogic62
– idle61
– manual transmission59
– reverse gear61
– Sequential Manual
Transmission with
Drivelogic60
– shift lights63
– starting assistant, refer to
Starting off on uphill
slopes82
– towing233
– tow-starting234
Transporting children
safely54
Transport securing device,
refer to Securing cargo119
Tread depth, refer to Minimum
tire tread206
Treble, refer to Tone
control151
"Treble", tone control151
Trip computer70
Trip-distance counter
– refer to Trip computer70
"Triple turn signal"64
Trip meter
– also refer to Trip
computer70
Trunk, refer to Cargo bay
Turning circle, refer to
Dimensions238
Turning lamps95
– replacing bulbs223
Turn signals63
– indicator lamp12
– replacing bulbs224
U
"Unchanged"53,62
Uniform Tire Quality Grading/
UTQR206
"Units"77
