2010 Alfa Romeo Giulietta oil temperature

10
GETTING
TO KNOW
YOUR CAR
SAFETY
STARTING
AND DRIVING
IN AN
EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
CONTENTS
ON CONSTANTLY:Low engine oil pressure(red)
FLASHING:Exhausted engine oil(diesel versions
with DPF only - red)
When the ignition key is turned to MAR, the warning light
switches on, but it should go out as soon as the engine is started.
1. Low engine oil pressure
The warning light turns on constantly along with a message on the
display (for versions/markets where provided) when the system
detects that engine oil pressure is low.
v
If the warning lightvturns on when the car is
travelling (on some versions, together with the
message on the display), stop the car immediate-
ly and contact Alfa Romeo Authorized Services.
2. Exhausted engine oil(diesel versions with DPF only)
The warning light comes on flashing and a specific message will
appear on the display (for versions/markets where provided). The
warning light may flash in the following ways, depending on the
versions:
❍for 1 minute every two hours;
❍for three minute cycles with the warning light off for intervals
of five seconds until oil is changed.After the initial warning, each time the engine is started up, the
warning light will continue to flash in the same ways as described
above, until the oil is changed. A specific message will appear on
the display (for versions/markets where provided) in addition to
the warning light.
Flashing of the warning light is not a fault but indicates that the
oil needs to be changed as a consequence of normal use.
Note that engine oil degrades faster under the following circum-
stances:
❍mainly urban use of the car , requiring more frequent regen-
eration of the DPF;
❍use of the car for short drives, in which the engine does not
have time to reach its regular operating temperature
❍repeated interruptions to the regeneration process signalled by
the DPF warning light coming on.
Exhausted engine oil should be replaced as soon
as possible after the warning light comes on, and
never more than 500 km after it first comes on.
Failure to comply with the instructions above may result
in severe damage to the engine and invalidate the war-
ranty. Remember that the operation of this warning light
is not related to the amount of oil in the engine. There-
fore, do not simply top up when the light starts flashing.
001-130 Alfa Giulietta EN 5ed 26-07-2010 16:33 Pagina 10

155
GETTING
TO KNOW
YOUR CAR
SAFETY
STARTING
AND DRIVING
IN AN
EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
CONTENTS
SAVING FUEL
Here are some suggestions which may help you to save fuel and
lower the amount of harmful emissions released into the atmos-
phere.
GENERAL CONSIDERATIONS
Car maintenance
Have checks and adjustments carried out in accordance with the
“Scheduled Servicing Plan” (see chapter “Servicing and mainte-
nance”).
Tyres
Check the tyre pressure at least once every 4 weeks: if the pres-
sure is too low, consumption levels increase as resistance to rolling
is higher.
Unnecessar y loads
Do not travel with an overloaded boot. The weight of the car and
its arrangement greatly affect fuel consumption and stability.
Roof rack/ski rack
Remove the roof rack or the ski rack from the roof after use. These
accessories decrease aerodynamic penetration and have a nega-
tive effect on fuel consumption. It is better to use a trailer to trans-
port particularly bulky objects.
Electric devices
Use electric devices only for the amount of time needed. The heat-
ed rear windscreen, additional headlights, windscreen wipers and
heater fan require a considerable amount of energy; increasing the
current uptake increases fuel consumption (by up to +25% in an
urban cycle).
Climate control system
Using the climate control system will increase consumption: use
the air vents when the external temperature so allows.
Spoilers
The use of non-certified spoilers may adversely affect aerodynam-
ics and fuel consumption.
151-160 Alfa Giulietta EN 3ed 13-04-2010 11:46 Pagina 155

206
GETTING
TO KNOW
YOUR CAR
SAFETY
STARTING
AND DRIVING
IN AN
EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
CONTENTS
REGULAR CHECKS
Every 1,000 km or before long journeys, check and top up the fol-
lowing if necessary:
❍engine coolant level, brake fluid and windscreen washer fluid
❍tyre pressure and condition;
❍operation of lighting system (headlights, direction indicators,
hazard lights, etc.);
❍operation of the windscreen wiper/washer system, position
and wear of windscreen/rear window wiper blades;
Check and top up, if required, the engine oil level every 3,000 km.
We recommend the use of PETRONAS LUBRICANTS, designed and
produced specifically for Alfa Romeo cars (see “Capacities” table
in the “Technical Specifications” chapter).
DEMANDING USE OF THE CAR
If you use the car mainly under one of the following conditions:
❍trailer or caravan towing;
❍dusty roads;
❍short (less than 7-8 km) and repeated journeys in sub-zero
temperatures;
❍frequent engine idling, travelling long distances at low speeds
or long term inactivity;
❍in cities;
perform the following inspections more frequently than shown on
the Scheduled Servicing Plan:
❍check front disc brake pad condition and wear;
❍check cleanliness of bonnet and boot locks, as well as cleanli-
ness and lubrication of linkages;
❍visually inspect the conditions of: engine, gearbox, transmis-
sion, pipes and tubes (exhaust - fuel - brakes), rubber parts
(boots, sleeves, bushes, etc.);
❍check battery charge and liquid level (electrolyte);
❍visually inspect the condition of auxiliary drive belts;
❍check and if necessary change engine oil and oil filter;
❍check pollen filter and replace it, if required;
❍check air filter and replace, if required.
199-224 Alfa Giulietta EN 5ed 26-07-2010 16:39 Pagina 206

SAE 75W grade synthetic lubricant.
FIAT 9.55550-MZ6 qualification
Grease for constant-velocity joints with low
friction coefficient. NL.GI. 0-1 consistency
FIAT 9.55580 qualification
Molybdenum disulphide grease for high temperatures.
NL.GI. 1-2 consistency
FIAT 9.55580 qualification
Synthetic fluid for braking and clutch systems
Exceeds specifications: FMVSS n. 116 DOT 4, ISO 4925,
SAE J 1704. Qualificati
on FIAT 9.55597
Red protective with antifreeze action, based on inhibited
monoethylene glycol with organic formula.
Exceeding CUNA NC 956-16, ASTM D 3306 specifications.
Additive for diesel with antifreeze and protective action for
diesel engines.
Mixture of spirits and surfactants.
Exceeds CUNA NC 956-11 specifications.
FIAT 9.55522 qualification
TUTELA TRANSMISSION
GEARFORCE
Contractual Technical
Reference N. F002.F10
TUTELA STAR 700
Contractual Technical
Reference N. F701.C07
TUTELA ALL STAR
Contractual Technical
Reference N. F702.G07
TUTELA TOP 4
Contractual Technical
Reference N. F001.A93
PARAFLU
UP(●)
Contractual Technical
Reference N. F101.M01
TUTELA DIESEL ART
Contractual Technical
Reference N. F601.L06
TUTELA
PROFESSIONAL SC 35
Contractual Technical
Reference N. F201.D02
Gearboxes and
differentials
(mechanical)
Differential side
constant-velocity joints
CV joints
wheel side
Hydraulic brakes and
hydraulically operated
clutch
Cooling circuits
proportions of use:
50% water
50% PARAFLU
UP(❑)
To be mixed with fuel
oil (25 cc per 10 litres)
To be used diluted or
undiluted in wind-
screen/ rear window
washer/wiper systems
243
GETTING
TO KNOW
YOUR CAR
SAFETY
STARTING
AND DRIVING
IN AN
EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICAT IONS
CONTENTS
Lubricants
for motion
transmission
Brake
fluid
Protective agent
for radiators
Additive
for diesel fuel Use Fluid and lubricant specifications Genuine Applications
for correct use of the car fluids and lubricants
(●) IMPORTANT Do not use fluids with different specifications for topping up or mixing.
(
❑) When the vehicle is used in particularly harsh climate conditions, we recommend using a 60-40 mixture of PARAFLUUPand distilled water.
Windscreen/
rear window/
headlamp
washer fluid
level
225-246 Alfa Giulietta EN 3ed 13-04-2010 11:50 Pagina 243