2010 Alfa Romeo Giulietta technical specifications

180
GETTING
TO KNOW
YOUR CAR
SAFETY
STARTING
AND DRIVING
IN AN
EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
CONTENTS
REAR FOG LIGHTS/REVERSING LIGHTS
To replace the bulbs proceed as follows:
❍open the boot and remove the cover A-fig. 137 using a screw-
driver in the point indicated by an arrow;
❍remove the connector A-fig. 138 and extract the bulb holder
assembly by operating on the retaining tab B and then by loos-
ening the screw C;
❍remove the bulb by pushing it slightly and turning it anticlock-
wise fig. 138;
D: reverse light bulb
E: fog light bulb
❍refit the bulb holder assembly positioning it correctly, fasten
screw C and then fix it by means of the retaining tab B. Then
refit the cover A-fig. 137.
fig. 137A0K0176mfig. 138A0K0177m
IMPORTANT Protect the tip of the screwdriver with a cloth to pre-
vent scratching when removing the cover A-fig. 137.
161-198 Alfa Giulietta EN 4ed 5-05-2010 9:04 Pagina 180

181
GETTING
TO KNOW
YOUR CAR
SAFETY
STARTING
AND DRIVING
IN AN
EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
CONTENTS
THIRD BRAKE LIGHTS
These are LEDs and are located on the spoiler integrated on the
boot hatch. Contact Alfa Romeo Authorized Services to replace these
lights.
NUMBER PLATE LIGHTS
To change the bulb proceed as follows:
❍remove the lens unit A-fig. 139;
❍turn bulb holder B-fig. 140 anticlockwise, remove bulb C and
replace it.
fig. 139A0K0147mfig. 140A0K0146m
161-198 Alfa Giulietta EN 4ed 5-05-2010 9:04 Pagina 181

182
GETTING
TO KNOW
YOUR CAR
SAFETY
STARTING
AND DRIVING
IN AN
EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
CONTENTS
CHANGING AN INTERIOR BULB
FRONT CEILING LIGHT
To change the bulb, proceed as follows:
❍remove courtesy light A-fig. 141 by applying leverage at the
points shown by the arrows;
❍open flap B-fig. 142 replace bulb C, releasing it from the side
contacts. Make sure that the new bulbs are correctly secured
between the contacts;
❍close flap B-fig. 142 and secure courtesy light A-fig. 141 in
its housing.
fig. 141A0K0090m
fig. 142A0K0089m
fig. 143A0K0062m
REAR CEILING LIGHT
To change the bulb, proceed as follows:
❍remove courtesy light A-fig. 143 by applying leverage at the
points shown by the arrows;
161-198 Alfa Giulietta EN 4ed 5-05-2010 9:04 Pagina 182

183
GETTING
TO KNOW
YOUR CAR
SAFETY
STARTING
AND DRIVING
IN AN
EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
CONTENTS
❍open flap B-fig. 144, replace bulb C, releasing it from the side
contacts. Make sure that the new bulbs are correctly secured be-
tween the contacts;
❍close flap B-fig. 144 and secure courtesy light A-fig. 143 in
its housing.
BOOT LIGHT
To change the bulb, proceed as follows:
❍open the boot and extract the light A-fig. 145 by operating in
the point shown by the arrow;
❍open the protection B-fig. 146 and replace the bulb;
❍close the protection B on the lens;
❍refit the light A-fig. 145 by inserting in its correct position on
one side and then on the other and then press the other side
until you hear it click.
fig. 146A0K0148m
fig. 145A0K0173m
fig. 144A0K0091m
161-198 Alfa Giulietta EN 4ed 5-05-2010 9:04 Pagina 183

184
GETTING
TO KNOW
YOUR CAR
SAFETY
STARTING
AND DRIVING
IN AN
EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
CONTENTS
GLOVE COMPARTMENT LIGHT
To change the bulb, proceed as follows:
❍open the glove compartment and extract the light A-fig. 147;
❍open the protection B and replace the bulb;
❍re-close the protective cover B on the lens;
❍refit the light A by inserting it in its correct position firstly on
one side and then on the other until it clicks into place.
fig. 147A0K0172m
COURTESY LIGHT
(for versions/markets, where provided)
For the replacement of these bulbs, contact Alfa Romeo Authorized
Services.
161-198 Alfa Giulietta EN 4ed 5-05-2010 9:04 Pagina 184

185
GETTING
TO KNOW
YOUR CAR
SAFETY
STARTING
AND DRIVING
IN AN
EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
CONTENTS
PUDDLE LIGHTS
To change the bulb, proceed as follows:
❍open the door (front or rear) and extract the light A-fig. 149;
❍open the protection B and replace the bulb;
fig. 149A0K0149m
❍re-close the protective cover B on the lens;
❍refit the light by inserting it in its correct position firstly on one
side and then on the other until it clicks into place.
161-198 Alfa Giulietta EN 4ed 5-05-2010 9:04 Pagina 185

186
GETTING
TO KNOW
YOUR CAR
SAFETY
STARTING
AND DRIVING
IN AN
EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
CONTENTS
CHANGING A FUSE
GENERAL INFORMATION
Fuses protect the electric system: they blow in the event of a
fault/intervention in the system. Check the state of the corre-
sponding fuse when a device does not work: the filament A-fig.
150 must be intact.
If it is, replace the blown fuse with a new one with the same am-
perage (same colour).
B = intact fuse.
C = fuse with damaged filament.
fig. 150A0K0042mfig. 151A0K0207m
Use the pliers A-fig. 151 under the engine compartment fusebox
lid to remove the fuses (see “Engine compartment fusebox” for
how to remove the lid).
161-198 Alfa Giulietta EN 4ed 5-05-2010 9:04 Pagina 186

187
GETTING
TO KNOW
YOUR CAR
SAFETY
STARTING
AND DRIVING
IN AN
EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
CONTENTS
Contact Alfa Romeo Authorized Services should the
fuse blow again.
Never replace a blown fuse with metallic wires or
other material.
Never replace a fuse with another of higher am-
perage: FIRE RISK.
If a general protection fuse (MEGA-FUSE, MIDI-
FUSE, MAXI-FUSE) blows, contact Alfa Romeo
Authorized Services.
Remove the key from the ignition switch and switch
off all loads before replacing a fuse.
Contact Alfa Romeo Authorized Services if a safe-
ty system (air bags, brakes), engine system (en-
gine, gearbox) or steering system general pro-
tection fuse blows.
161-198 Alfa Giulietta EN 4ed 5-05-2010 9:04 Pagina 187