260
SAFETY
DEVICES
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
CAR
MAINTENANCE
INDEX
CORRECT USE
OF THE CAR
DASHBOARD
AND
CONTROLS
TECHNICAL SPECIFICATIONS
COLD TYRE INFLATION PRESSURE
WHEEL ANGLES
Tyres
205/55 R16 91V
front rear
2.3 2.3
2.6 2.6Tyres
215/55 R16 93V
front rear
2.3 2.3
2.5 2.5Tyres
225/50 R17 98W
front rear
2.5 2.5
2.9 2.7Tyres
235/45 R18 98W (▼)
front rear
2.7 2.5
2.9 2.7Tyres
235/40 ZR19 96Y (▼)
front rear
2.7 2.5
3.0 2.8
All types
–35’ ± 18’
max. difference
right/left: 24’
4° 15’ ± 18’
max. difference
right/left: 18’
–8’ ± 4’
max. difference
right/left: 4’
–40’ ± 18’
max. difference
right/left: 24’
13’ ± 7’
(total toe-in: 26’ ± 7’)4x2 Versions
–1° 1’± 18’
max. difference
right/left: 24’
4° 15’± 18’
max. difference
right/left: 18’
–7’± 4’
max. difference
right/left: 4’
–1° 3’± 18’
max. difference
right/left: 24’
11’± 7’
(total toe-in: 22’± 7’)4x4 Versions
–38’±18’
max. difference
right/left: 24’
4° 15’ ± 18’
max. difference
right/left: 18’
–7’ ± 4’
max. difference
right/left: 4’
–1° 3’ ± 18’
max. difference
right/left: 24’
11’ ± 7’
(total toe-in: 22’ ± 7’)TI Versions
Front
wheels
Rear
wheels
– camber
– caster
– half toe-in
(per wheel)
– camber
– half toe-in (per wheel)
VEHICLE GEOMETRYThe TI fittings present lower suspensions around of 20 mm with respects to the other versions.
Warning: lowered trim car, pay attention when driving on ramps, humps or on particularly
rough routes.
average load bar
full load bar
(▼) Unchainable tyres. When using winter tyres, use 225/50 ZR17 96 tyres or 235/45 R18 98. Vehicles with TI fittings should not use 16” wheel rims.
Add +0.3 bar to the prescribed inflation pressure when the tyres are warm. Recheck pressure value with cold tyres.
With snow tyres, add +0.2 bar to the inflation pressure value prescribed for standard tyres.
Inflate tyres to full load pressures if driving at continuous speed exceeding 160 km/h.Space-saver
spare wheel
T125/80 R17
4.2
249-270 Alfa 159 GB 3-12-2009 15:51 Pagina 260
ENGINE OIL REPLEACEMENT (litres)
REFUELLING (litres)
CUSTOMER SERVICESTECHNICAL SERVICES - SERVICE ENGINEERING
Largo Senatore G. Agnelli, 5 - 10040 Volvera - Torino (Italia)
Fiat Group Automobiles S.p.A.
Publication no. 60438100 - 3 Edition - 11/2009
All rights reserved. Reproduction, even in part is prohibited without written permission
from Fiat Group Automobiles S.p.A.
SERVICE
COLD TYRE INFLATION PRESSURE
Space-saver
spare wheel
T125/80 R17
4.2
1.8 140 HP - 1750 TURBO BENZINA - 1.9 JTDM8v - 1.9 JTDM16v - 2.0 JTDM- 2.4 JTDM- 3.2 JTS
Fuel tank capacity 70
Reserve 10
For cars with petrol engine, only use unleaded petrol with over 95 R.O.N. (Specification EN228).
For cars with diesel engine only use Diesel fuel for motor vehicles (Specification EN590).
Tyres
205/55 R16 91V
front rear
2.3 2.3
2.6 2.6Tyres
215/55 R16 93V
front rear
2.3 2.3
2.5 2.5Tyres
225/50 R17 98W
front rear
2.5 2.5
2.9 2.7Tyres
235/45 R18 98W (▼)
front rear
2.7 2.5
2.9 2.7Tyres
235/40 ZR19 96Y (▼)
front rear
2.7 2.5
3.0 2.8
average load bar
full load bar
1.8 140 HP 1750 3.2 JTS 1.9 JTDM8v 2.0 JTDM2.4 JTDMTURBO BENZINA 1.9 JTDM16v
Lubrication system engine 4.5 5.0 5.4 4.6 4.9 6.4
Do not discard used oil in the environment.
(▼) Unchainable tyres. When using winter tyres, use 225/50 R17 98 tyres or 235/45 R18 98. Vehicles with TI fittings should not use 16” wheel rims.
Add +0.3 bar to the prescribed inflation pressure when the tyres are warm. Recheck pressure value with cold tyres.
With snow tyres, add +0.2 bar to the inflation pressure value prescribed for standard tyres.
Inflate tyres to full load pressures if driving at continuous speed exceeding 160 km/h.
319-328 Alfa 159 GB 3-12-2009 15:53 Pagina 328
