2010 Alfa Romeo 159 CD changer

304
SOUND SYSTEM
AUDIO ADJUSTMENTS
The options proposed by the audio menu dif-
fer according to the audio source selected:
AM/FM/CD/CDC.
To change Audio functions, press briefly but-
ton AUDIO. The display will show “BASS”.
To scroll the Menu options, use buttons
N
or O. To change the setting of the option
selected, press buttons
÷or ˜.
The display will show the current status of
the function selected.
The functions controlled by the menu are the
following:
❒BASS (bass adjustment);
❒TREBLE (treble adjustment);
❒BALANCE (right/left balance);
❒FADER (excluding versions with Bose HI-
FI system) (front/rear balance);
❒LOUDNESS (excluding versions with Bose
HI-FI system) (LOUDNESS on/off);
❒EQUALIZER (excluding versions with Bose
HI-FI system) (standard equalization ac-
tivation and selection);
❒USER EQUALISER (personal equalization
setting).
TONE ADJUSTMENT
(bass/treble)
Proceed as follows:
❒Use button Nor Oto select “BASS”
or “TREBLE” in the AUDIO menu;
❒press button ÷or ˜to in-
crease/decrease the basses or trebles.
Pressing the buttons briefly the change is grad-
ual by steps. Pressing longer, changing is
faster.
BALANCE ADJUSTMENT
Proceed as follows:
❒Use button Nor Oto select “BALANCE”
in the AUDIO menu;
❒press button ÷to increase the sound
from the right speakers or button
˜to increase the sound from the left speak-
ers.
Pressing the buttons briefly the change is grad-
ual by steps. Pressing longer, changing is
faster.
Select “
÷0 ˜” to set the same val-
ue for both right and left speakers.
MUTE /PAUSE FUNCTION
(turning off the volume
completely)
To switch on the Mute function, briefly press
the button MUTE. Volume will gradually low-
er and the display will show the word
“MUTE” (when in radio mode) or “PAUSE”
(when in CD or CD-Changer mode).
To switch off the Mute function, press the
button MUTE again. Volume will gradually
become louder returning to the value set be-
fore switching on the Mute function.
Changing volume will deactivate the Mute
function and the volume will be set to the
new level selected.
With the Mute function on:
❒if an emergency alarm or a traffic bulletin
arrives with the TA function on, the mes-
sage ignores the Mute function. The Mute
function will be resumed at the end of the
traffic announcement.
293-318 Alfa 159 GB 8-04-2009 10:56 Pagina 304

306
SOUND SYSTEM
SELECTING THE FREQUENCY
BAND
If in the Tuner mode, briefly and repeated-
ly press button FM or AM to select the re-
quired frequency band.
Every time the button is pressed the fol-
lowing bands are selected in sequence:
❒Pressing button FM: “FM1”, “FM2”,
“FMT”;
❒Pressing button AM: , “MW” and “LW”.
Each band is shown by the respective word-
ing on the display.
The last station selected in the respective fre-
quency band will be tuned.
The FM band is divided into sections: FM1,
FM2 and FMT. The FMT reception band is re-
served to the stations stored automatically
with the AutoSTore function.
PRESETTING BUTTONS
The buttons with symbols from 1 to 6 make
it possible to set the following presettings:
❒18 in the FM band (6 in FM1, 6 in FM2,
6 in FMT);
❒6 in the MW band;
❒6 in the LW band;
To call a preset station, choose the required
frequency band and then press briefly the
corresponding preset button (from 1 to 6).
Pressing the respective preset button for
longer than 2 seconds will store the tuned
station. Storing is confirmed by a beep.
STORING THE LAST STATION
HEARD
The radio automatically keeps in storage the
last station heard for each reception band,
which is then tuned when the radio is turned
on or the reception band is changed.
INTRODUCTION
When the set is turned on the last function
selected before turning off is played (Radio,
CD or CD Changer).
To select the Tuner source while listening
to another audio source, press briefly but-
tons FM or AM, according to the required
frequency band.
When Tuner is on, the display will show the
selected station name (RDS stations only)
(or frequency), the frequency band (e.g.:
FM1) and the preselection button number
(e.g.: P1).
R R
A A
D D
I I
O O

( (
T T
U U
N N
E E
R R
) )
293-318 Alfa 159 GB 8-04-2009 10:56 Pagina 306

309
SOUND SYSTEM
TRAFFIC INFO function
(traffic information)
Certain stations in the FM band (FM1, FM2
and FMT) are enabled to also broadcast in-
formation about traffic conditions. In this
case the display shows “TP”.
To turn the TA (traffic information) function
on/off, briefly press button MENU, select
“TRAFFIC INFO” and then ON/OFF.
IMPORTANT If the TA function (traffic infor-
mation) is on, with CD, CD Changer (if in-
stalled), Telephone or Mute/Pause active:
automatic station tuning will start.
With the TA function it is possible:
❒to search only RDS stations that transmit
in the FM band, enabled to broadcast traf-
fic information;
❒to receive traffic information although CD
player or CD Changer are being used;
❒to receive traffic information at a prede-
fined minimum volume even with the ra-
dio volume off.IMPORTANT In certain countries radio sta-
tions exist which, even if the TP function is
on (the display shows “TP”), do not trans-
mit traffic information.
If the radio is working in the AM band, when
TA is activated, it passes to the FM1 band
on the last station heard.
The volume with which the traffic bulletin
is transmitted varies depending on the lis-
tening volume:
❒listening volume below 20: traffic bulletin
volume = 20 (fixed value);
❒listening volume above 20: traffic bulletin
volume = listening volume +1.
If the volume is changed during a traffic bul-
letin the value is not shown on the display
and the new value is kept only for the bul-
letin in progress.
When receiving traffic information the dis-
play will show message “TRAFFIC INFOR-
MATION”.
The TA function is interrupted by pressing
any sound system button. AF SWITCHING function
(alternative frequency search)
Within the RDS system the radio can work
in two different modes:
❒“AF ON”: alternative frequency search on
(the display shows “AF”);
❒“AF OFF”: alternative frequency search
off.
With “AF ON”, the radio is automatically
tuned to the station with the strongest sig-
nal that is broadcasting the same pro-
gramme. During the journey it will thus be
possible to continue listening to the station
chosen without having to change the fre-
quency when changing area.
Of course, the station being listened to must
be receivable in the area the car is crossing.
To turn the AF function on/off press button
MENU, select “AF SWITCHING” and then
ON/OFF. If the AF function has been turned
on the display shows “AF”.
If the radio is working in the AM band, when
the AF function is activated, it passes to the
FM1 band on the last station selected.
293-318 Alfa 159 GB 8-04-2009 10:56 Pagina 309

317
SOUND SYSTEM
INTRODUCTION
This section only describes CD Changer (for
versions/markets, where provided)
op-
eration variants: as concerns sound system
operation, refer to section “FUNCTIONS AND
ADJUSTMENTS”.
SELECTING THE CD CHANGER
Turn on the set, then press briefly and re-
peatedly button CD until selecting “CHANG-
ER”.
POSSIBLE ERROR MESSAGES
Error messages will be displayed in the fol-
lowing cases:
❒no CD in the CD Changer: the display will
show “NO CD” until changing the sound
source;
❒selected CD is illegible (CD not in the se-
lected position or CD not inserted prop-
erly): the display shows “CD ERROR” af-
ter the number of the selected CD. The
next CD will be selected; if there are no
other CDs or if they are also illegible the
display will show the wording “NO CD”
until the sound source is changed;
❒error in CD reading: the display shows
“CD ERROR”. The next CD will be se-
lected; if there are no other CDs in the CD
Changer (after the last CD search will
restart from the first one) or if they are
also illegible the display will show the
wording “NO CD” until the sound source
is changed;
❒a CD-ROM is inserted: next CD will be
selected.
C C
D D

C C
H H
A A
N N
G G
E E
R R

( (
C C
D D
C C
) )
Installation and connection
of a Lineaccessori CD
Changer shall only be per-
formed by Alfa Romeo Authorized
Services.SELECTING THE CD
Press button Nto select the next CD and
button
Oto select the previous CD.
If the loader does not contain a disc in the
position selected, the display briefly shows
the wording “NO CD”, and the next CD is
played automatically.
293-318 Alfa 159 GB 8-04-2009 10:56 Pagina 317