26
SAFETY
DEVICES
CORRECT USE
OF THE CAR
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
“Trip B”, available on multifunction display
only, shall be used to display the figures
relating to:
– Trip distance B
– Average consumption B
– Average speed B
– Travel time B (driving time).
Note“Trip B” function can be excluded
(see paragraph “Trip B On/Off”). “Range”
and “Instant consumption” cannot be re-
set.Average consumption
This value shows the average consump-
tion from the start of the new mission.
Instant consumption
This value shows instant fuel consumption
(this value is updated second by second).
If parking the car with engine on,
the display will show “----”.
Average speed
This value shows the car average speed as
a function of the overall time elapsed since
the start of the new mission.
Travel time
This value shows the time elapsed since
the start of the new mission.
IMPORTANT Lacking information, Trip
computer values are displayed with “----”.
When normal operating condition is re-
set, calculation of different units will
restart regularly. Values displayed before
the failure will not be reset. Values displayed
Range
This value shows the distance in km (or
mi) that the car can still cover before
needing fuel, assuming that driving condi-
tions are kept unvaried. The display will
show “----” in the following cases:
– value lower than 50 km (or 30 mi)
– car left parked with engine running for
long.
IMPORTANT The variation of the auton-
omy value can be influenced by different
factors: driving style (see what is described
in paragraph “Driving style” in the chap-
ter “Start-up and driving”), type of route
(highways, urban, mountain, etc…), use
conditions of the car (load transported,
tire pressure, etc…). What was described
previously must be taken in consideration
when planning a trip.
Trip distance
This value shows the distance covered
from the start of the new mission.
129
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
SAFETY
DEVICES
CORRECT USE
OF THE CAR
WARNING
LIGHTS AND
MESSAGES
MESSAGES ON THE MULTI-
FUNCTIONAL RESETTABLE
DISPLAY
Check tire pressure
The message is visualized on the display in
the event that two or more tires turn out
to be under inflated. The display will show
the information regarding each tire in se-
quence.
In this event it is advisable to proceed as
soon as possible with the inflation of the
tires in order to return the pressure val-
ues back to the recommended ones (see
paragraph “ Recommended cold inflation
pressures” in the “Technical Data” chap-
ter).Insufficient tyre pressure
The message is visualized on the display
when the pressure of one or more tires
goes under a fixed threshold. In this way
the T.P.M.S. system informs the driver that
there is the possibility that one or more
tires are dangerously under inflated and
there probably is a puncture.
IMPORTANT Do not continue driving
with one or more deflated tires since the
driveability of the vehicle can be jeopar-
dized. Stop the car trying not to brake or
to steer roughly. Immediately fix the tire
using the suitable kit (see the “Emergen-
cies” chapter) and refer to the Abarth
Dealership as soon as possible.
Tire pressure not suitable
for the speed
If one foresees to drive at a speed high-
er than 160 km/h, it is necessary to inflate
the tires to a higher pressure as recom-
mended in the “Recommended inflation
pressures” paragraph.
This message is viewed on the display in
the event the T.P.M.S. system (for ver-
sions/markets, where provided) notes that
the pressure of one or more of the tires
is not suitable for the speed of the vehi-
cle at the moment (see what reported in
the “Insufficient tire pressure” paragraph
of this chapter).IMPORTANT In this event immediately
reduce your speed since the overheating
of the tire could jeopardize the perfor-
mance and the life of the tire, as well as,
in extreme cases, cause the tire explosion.
Very high radio frequencies
can cause troubles and in-
hibit the correct functioning of the
T.P.M.S. system.
This event is indicated to the driver
with a specific message (for ver-
sions/markets, where provided). This
message will disappear automatical-
ly as soon as the radio frequency dis-
turbance ceases to perturb the sys-
tem.
WARNING
