Page 3 of 166
INTERIOR
Trip computer
Using the MENU button, this system
allows you to see the setting of various
v e h i c l e c o n fi g u r a t i o n s / i n f o r m a t i o n , s u c h
as deactivation of the passenger's airbag,
automatic door locking, language, etc.
66
Folding multifunction passenger seat
This passenger seat can be placed in one of
t h r e e c o n fi g u r a t i o n s :
- a seat for carrying a passenger,
- a table to accommodate your various documents...,
- f o l d e d f o r t r a n s p o r t i n g l o n g o b j e c t s .
80
Audio system
T h e s e s y s t e m s b e n e fi t f r o m t h e l a t e s t
t e c h n o l o g y : M P 3 c o m p a t i b l e a u d i o s y s t e m
and Bluetooth
®
hands-free kit with steering
mounted controls.
71
Cruise control
This system maintains the speed of the vehicle
at the programmed value.
42
Electronic gearbox
This system provides perfect driving by
combining a fully automatic mode and a
manual mode.
48
6
Familiarisation
Page 13 of 166
16
Familiarisation
DRIVING SAFELY
Electronic gearbox Display in the instrument panel Moving off
48
T h i s fi v e - s p e e d g e a r b o x o f f e r s a c h o i c e
between the comfort of fully automatic
operation or the pleasure of manual gear
changing.
N. neutral.
R. reverse.
M +/-. sequential mode.
A. automated mode.
E. economy programme. The gear and the driving mode selected
appear in the instrument panel screen.
N: neutral.
R: reverse gear.
1 2 3 4 5: gears engaged.
AUTO: automatic mode.
E: economy programme. Select position
N and press the brake pedal
fi r m l y w h i l e s t a r t i n g t h e e n g i n e .
Start the engine.
E n g a g e fi r s t g e a r ( m o v e f r o m t h e m i d d l e
position towards + ) o r r e v e r s e ( p o s i t i o n R )
using the gear lever.
Release the parking brake.
Release the brake pedal, then move off.
Page 14 of 166
17
FAMILIARISATION
Familiarisation
Going into engine STOP mode
Stop & Start
- with a manual gearbox; press the clutch
pedal,
- with an electronic gearbox;
Page 15 of 166
18
Familiarisation
DRIVING SAFELY
Cruise control
1. C r u i s e c o n t r o l m o d e S e l e c t i o n / O f f .
2. Decreasing of the programmed value.
3. Programming of a speed/Increasing of the
programmed value.
4. C r u i s e c o n t r o l r e s u m e .
In order to be programmed or activated, the
speed of the vehicle must be higher than
1 8 m p h ( 3 0 k m / h ) , w i t h a t l e a s t s e c o n d g e a r
engaged in the gearbox.
42
1. STOP position - Off.
2. MAR position - Ignition on.
3. AVV position - Start.
Ignition switch
The cruise control mode appears in the
instrument panel when selected.
Display in the instrument panel
Cruise control
STARTING
A v o i d a t t a c h i n g h e a v y o b j e c t s t o t h e
key which could weigh on the key when
i n t h e i g n i t i o n s w i t c h ; t h i s c o u l d c a u s e
malfunctions.
32
Page 16 of 166
19
1
READY
TO
GO
Instruments and controls
INSTRUMENT PANELS
1. Distance recorder in miles/kilometres.
2. Screen.
3. Fuel gauge.
4. Coolant temperature.
5. Rev counter.
Instrument panel with level 1 screen Instrument pan
el with level 2 screen
Instrument panel level 1 screen
- Time.
- Miles/Kilometres travelled.
- Trip computer/range, fuel consumption, average speed.
- Headlamp beam height.
- Programmable overspeed warning.
- Gear shift indicator.
- Stop & Start.
- Activating or deactivating the passenger's airbag.
Instrument panel level 2 screen
- Time.
- Date.
- Radio. - Miles/Kilometres travelled.
- Ambient temperature.
- Modes and gear engaged on the
electronic gear control gearbox,
- Trip computer/range, fuel consumption, average speed
- Headlamp beam height,
- Programmable overspeed warning,
- Selection of the display language,
- Gear shift indicator.
- Stop & Start.
- Activating or deactivating the passenger's airbag,
- Activation or deactivation of automatic door locking on moving off.
Page 22 of 166
25
1
READY
TO
GO
Instruments and controls
Warning lamp
is indicates Solution - action
Cruise control on. activation of the cruise
control. Manual selection. Chapter 1, "Steering mounted
controls".
Rear parking sensors on, accompanied by
a message in the
screen. a fault with the system. The audible system is not active.
Have it checked as soon as possible by
a CITROËN dealer.
Electronic gearbox on, accompanied by
a message in the
screen.
incorrect operation by the
driver.
Start the desired operation again.
fl a s h i n g , a c c o m p a n i e d
by an audible signal
and a message in the
screen. a fault with the gearbox.
Have it checked as soon as possible by
a CITROËN dealer.
Page 50 of 166
42
Steering mounted controls When the system is activated, The "Cruise
control" warning lamp comes on in the
instrument panel:
CRUISE CONTROL
"This is the speed at which the driver wishes
to drive".
This aid to driving in free-flowing traffic
enables the vehicle to maintain the speed
programmed by the driver, without use of the
accelerator pedal.
In order for it to be programmed or
activated, the vehicle speed must be greater
than 18 mph (30 km/h) with at least second
gear engaged on the manual gearbox. Selecting the function
- Place the ring in the
ON position. The cruise
control is selected but
is not yet active and
no speed has been
programmed. First activation/
Programming a speed
- Reach the chosen
speed by pressing the
accelerator.
- Move the control up (+) for at least one second then release it.
This programmes the reference speed. You
can release the accelerator pedal, and the
vehicle will maintain this speed.
Temporarily exceeding
of the speed
It is possible to accelerate
and drive momentarily at
a speed greater than the
programmed speed (for
example to overtake another vehicle).
When the accelerator pedal is released, the
vehicle will return to the programmed speed.
Deactivation
- Press the brake or clutch pedal.
The cruise control is also deactivated if
the ABS or ESP system is invoked.
Page 54 of 166
46
Gearbox and steering wheel Good practice
To change gear smoothly, always press the
clutch pedal fully down.
To prevent the mat from becoming caught under the pedal:
- ensure that the mat is positioned correctly,
- never fit one mat on top of another.
Avoid leaving your hand on the gear knob as
the force exerted, even if slight, may cause
wear of the internal components of the
gearbox over time.
MANUAL GEARBOX
Reverse gear
Never engage reverse gear until the vehicle
is completely stationary.
The lever should be moved slowly to reduce
the noise on engaging reverse gear.
If your vehicle is fitted with parking
sensors, the system comes into
operation when reverse gear is engaged,
confirmed by an audible signal.
Refer to the "Rear parking sensors"
section of chapter 3.
STEERING WHEEL ADJUSTMENT
When the vehicle is stationary, unlock the
steering wheel by pushing the lever down.
Adjust the depth and height of the steering
wheel, then lock by pulling the lever up fully.
