Page 12 of 355
15
F A M I L I A R I S A T I O N
Front seats
Head restraint
Backrest angle
Seat height adjustment
Lumbar support
Forwards-backwards
adjustment
Armrest Electric adjustments
Manual adjustments
67
Heated seat control ( l o -
cated on the inside of the
f r o n t s e a t s )
66
1. A d j u s t m e n t o f s e a t h e i g h t , a n g l e
and forwards-backwards position
2. A d j u s t m e n t o f b a c k r e s t a n g l e a n d
lumbar support
3. Driver: storing driving positions
T h e s e a t s c a n a l s o b e a d j u s t e d o n a
temporary basis:
- on opening one of the front doors,
- after switching on the ignition.
S I T T I N G C O M F O R T A B L Y
Page 16 of 355
19
F A M I L I A R I S A T I O N
Deactivation of front passenger
airbag Child lock
The 3 second-row seats of your vehicle
a r e fi t t e d w i t h r e g u l a t i o n I S O F I X m o u n t -
ing points, with 3 rings for each seat po-
sition A B C .
T h i s fi x i n g s y s t e m i s d e s i g n e d f o r c h i l -
dren weighing up to 18 kg.
Electric control
132
122
119
Front airbags
Manual control
P A S S E N G E R S A F E T Y
1. Insert the key in lock A .
2. Select the "
OFF
" position.
3. Remove the key. The rear doors are locked by operating
t h e l e v e r u s i n g t h e k e y ( a p e r t u r e a t a n
a n g l e ) .
Pressing the button prohibits operation
of the electric windows from the rear
of the vehicle and opening of the rear
doors from inside. ISOFIX mounting system
Page 18 of 355
21
F A M I L I A R I S A T I O N
SECOND ROW SEATS
The 3 second-row seats are indepen-
dent of each other and are all the same
w i d t h . T h e y c a n a l l b e a d j u s t e d t o t h e
"comfort" position.
Placing a seat in the "comfort"
position
Returning the seat to its original position
69 Longitudinal adjustment
Lift up control
A , located at the front of
t h e s e a t , a n d a d j u s t t h e s e a t i n t o t h e
desired position.
I N T E R I O R
"Comfort" position
Pull on strap B .
The backrest reclines and the seat base
pivots slightly.
Pull on strap B and guide the seat
forwards.
Page 19 of 355
22
F A M I L I A R I S A T I O N
I N T E R I O R
Folding the seats
From the boot - whilst loading,
for example (CITROËN Grand
C4 Picasso)
SECOND ROW SEATS
From outside
P u l l fi r m l y u p w a r d s o n s t r a p C , as
indicated by the red arrow, to unlock
the seat; keep pulling until the seat
is fully folded.
Slide latch A of the panel down-
wards, to unlock it.
Return the panel to the upright posi-
tion, then slide latch A upwards to
lock it.
Before deploying the rigid panels, check
that the second row seats are in their
fully rear position.
71
H a v i n g fi r s t l y f o l d e d t h e t h i r d - r o w
seats.
Pull on strap D to unlock the re-
q u i r e d s e a t . Repositioning the seats
Return the rigid panels of the second-
r o w s e a t s t o t h e i r i n i t i a l ( u p r i g h t ) p o s i t i o n
a n d l o c k t h e m i n p o s i t i o n ( C I T R O Ë N
G r a n d C 4 P i c a s s o ) .
Raise the backrest and push it back-
wards until it locks in position.
Rigid panel (CITROËN Grand
C4 Picasso)
A rigid panel is attached to each second-
row seat backrest.
Unlocking/Locking the rigid panel
Page 20 of 355
23
F A M I L I A R I S A T I O N
F o l d t h e c o n c e r t i n a b o a r d s ( 1 2 3 ) a r -
ranged above each of the third-row
seats.
Pull on the black strap F , located on the
seat backrest.
73
Before moving the third-row seats,
do not forget to lock in the rigid pan-
e l s fi r s t ( l o c a t e d a t t h e b a s e o f t h e
s e c o n d - r o w s e a t b a c k r e s t s ) .
Installing the seats
Put the three sections of the concertina
b o a r d s ( 1 2 3 ) t o t h e i r v e r t i c a l p o s i t i o n ,
then pull on the red strap G .
Before moving the third-row seats, re-
turn the rigid panels to the upright posi-
tion and lock them. Pull on control
E , located at the top of
the second-row seats backrest.
72
I N T E R I O R
Stowing the seats Access to third-row seats
D o n o t l e a v e o b j e c t s e i t h e r o n o r u n -
derneath the second-row seats when
you are folding them.
THIRD ROW SEATS (CITROËN
GRAND C4 PICASSO)
Page 54 of 355
III
56
C O M F O R T
Air conditioning
To ensure that your system operates
correctly, it is recommended that you
have it checked regularly.
Water arising from condensation
in the air conditioning drains away
through a hole provided for this pur-
pose. A pool of water may thus form
under the vehicle when stationary.
To preserve the sealing of the air
conditioning compressor, operate
the air conditioning at least once a
month.
Regardless of the season, the air
conditioning is useful, since it re-
moves humidity and condensation.
To be effective, the air conditioning
should only be used with the win-
dows closed.
If after a lengthy stop in bright sun-
light the interior temperature is
excessive, air the passenger com-
partment by opening the windows
for a few moments, then close them
again.
The air conditioning operates by
using power from the engine. This
results in a slight increase in fuel
consumption.
Dust filter/Odour filter (active
carbon)
T h e r e i s a fi l t e r f o r e x c l u d i n g o d o u r s
and dust.
T h i s fi l t e r h a s t o b e c h a n g e d i n
accordance with the vehicle's ser-
vicing schedule (see "Maintenance
and Warranty Guide").
Air circulation
A i r v e n t s o n t h e fl o o r u n d e r n e a t h t h e
front seats provide enhanced heat-
ing for the rear seat positions; take
care not to obstruct them.
Air vents
The air vents to the face have grilles
and thumbwheels to adjust the air
fl o w a n d d i r e c t i o n ( u p - d o w n , r i g h t -
left).
The automatic regulation of the air
conditioning in the passenger com-
partment uses a number of sensors
(sunshine sensor, ambient tempera-
ture sensor...) that relieve you of the
need to make frequent adjustments
to the displayed temperature.
Take care not to obstruct the sun-
shine sensor, located on the dash-
board behind the instrument panel.
Sensors
Page 66 of 355
III
66
C O M F O R T
FRONT SEATS
MANUAL ADJUSTMENTS
1. Forwards-backwards adjustment
Raise the control bar, then slide the
seat to the position desired. 2. Lumbar support
Rotate the control until you attain
the position desired. 3. Seat height adjustment
Raise or lower the the control the
number of times necessary to obtain
the position desired.
4. Backrest angle
Operate the control and adjust the
angle of the backrest.
It is possible to incline the back-
rest 45° rearwards by tilting it until it
locks; to unlock it, lift the control.
5. Armrest
To adjust the position of the armrest,
pull it up and then fully down, and
then raise it to the desired position.
6. Head restraint
To raise it, pull it upwards. To lower
it, press on the control as well as on
the head restraint.
The adjustment is correct when the
top of the head restraint is level with
the top of the head.
It can also be adjusted for tilt (de-
pending on version).
To remove it, press on the unlocking
button and pull it upwards.
To adjust the head restraint for-
wards/backwards, move the base of
the head restraint to obtain the posi-
tion desired.
Never drive without the head
r e s t r a i n t s fi t t e d . T h e y m u s t b e i n
place and adjusted correctly.
Page 67 of 355
III
67
C O M F O R T
1. Adjustment of the seat height and angle,
forwards-backwards 2. Adjustment of backrest
angle and lumbar support
The seats can also be adjusted elec-
trically for a short period:
- on opening one of the front doors,
- after switching off the ignition. Heated seats control
ELECTRIC ADJUSTMENTS
Raise or lower the front of
control to raise or lower the
front of the seat base (on
driver’s seat).
Raise or lower the rear of
control to raise or lower the
seat.
Action control forwards or
backwards to slide the seat
forwards/backwards. Push the top of control
forwards or backwards to
adjust the backrest angle.
Raise or lower control to
increase or decrease the
lumbar support.
With the engine running, the front
seats can be heated individually.
Use the corresponding adjust-
ment wheel, placed on the inner
side of each front seat, to switch
on and select the level of heating
required:
0 : Off.
1 : Low.
2 : Medium.
3 : High.
