2010.5 Citroen C3 DAG bonnet
[x] Cancel search: bonnetPage 2 of 235
FAMILIARISATION
Remote control key Fuel tank
1. O p e n i n g t h e f u e l fi l l e r fl a p .
2. O p e n i n g a n d h o o k i n g t h e f u e l fi l l e r
cap.
A. Unfolding/Folding the key.
B. Unlocking the vehicle.
60
69
A. Interior release lever.
B. Exterior safety catch.
C. Bonnet stay.
121
Bonnet
ACCESS
Other functions...
C. Normal locking of the vehicle
Vehicle location. Tank capacity:
- a p p r o x i m a t e l y 5 0 l i t r e s ( p e t r o l ) ,
- a p p r o x i m a t e l y 4 8 l i t r e s ( D i e s e l ) .
Page 5 of 235
FAMILIARISATION
INSTRUMENTS AND CONTROLS
1. Cruise control/speed limiter
switches.
2. H e a d l a m p h e i g h t a d j u s t m e n t .
3. S t e e r i n g w h e e l a d j u s t m e n t c o n t r o l .
4. Lighting and direction indicators
control stalk.
5. Instrument panel.
6. D r i v e r ' s a i r b a g .
H o r n .
7. Gear lever.
8. 1 2 V a c c e s s o r y s o c k e t
USB port/auxiliary socket.
9. H e a t e d s e a t c o n t r o l .
10. Bonnet release lever.
11. D o o r m i r r o r c o n t r o l s .
Electric window controls.
Rear doors and electric windows deactivation control.
12. Fusebox.
13. Stop & Start button.
Electronic stability programme b u t t o n ( E S P / A S R ) .
14. Front door window demisting/
defrosting vent.
15. S p e a k e r ( t w e e t e r ) .
16. W i n d s c r e e n d e m i s t i n g / d e f r o s t i n g
vent.
Page 85 of 235
5
VISIBILITY
Automatic rain sensitive
windscreen wipers
The windscreen wipers operate automati-
cally, without any action on the part of the
driver, if rain is detected (sensor behind
t h e r e a r v i e w m i r r o r ) , a d a p t i n g t h e i r s p e e d
to the intensity of the rainfall.
Activation
Switching off Operating fault
If an automatic wiping fault occurs,
the wipers will operate in intermittent
mode.
Have it checked by a CITROËN dealer
o r a q u a l i fi e d w o r k s h o p . Vertical windscreen wiper
position
To retain the effectiveness of the
" fl a t - b l a d e " w i p e r b l a d e s , i t i s a d -
visable to:
- handle them with care,
- clean them regularly using soapy water,
- not use them to hold a sheet of cardboard against the
windscreen,
- r e p l a c e t h e m a t t h e fi r s t s i g n s of wear.
Do not cover the rain sensor,
linked with the sunshine sensor
and located in the centre of the
windscreen behind the rear view
mirror.
Switch off the automatic wiping
when using an automatic car
wash.
In winter, it is advisable to wait
until the windscreen is complete-
ly clear of ice before activating
the automatic wiping.
The automatic wiping must be re-
activated if the ignition has been
off for more than one minute, by
pushing stalk
A downwards.
This position allows the wiper blades to
be lifted for winter parking, cleaning or re-
placement without damaging the bonnet.
In the minute following switching off of
the ignition, any action on the wiper
stalk positions the wipers vertically.
To park the wipers after this has been
done, switch on the ignition and operate
the wiper stalk.
This is controlled manually by the driv-
er by pushing stalk
A to the "AUTO"
position.
This is controlled manually by the driver
by moving stalk A upwards, returning it
to position "0" . It is accompanied by the indica-
tor lamp in the instrument panel
going off and a message in the
multifunction screen.
It is accompanied by the illumina-
tion of this indicator lamp in the
instrument panel and a message
in the multifunction screen.
Page 86 of 235
5
VISIBILITY
Automatic rain sensitive
windscreen wipers
The windscreen wipers operate automati-
cally, without any action on the part of the
driver, if rain is detected (sensor behind
t h e r e a r v i e w m i r r o r ) , a d a p t i n g t h e i r s p e e d
to the intensity of the rainfall.
Activation
Switching off Operating fault
If an automatic wiping fault occurs,
the wipers will operate in intermittent
mode.
Have it checked by a CITROËN dealer
o r a q u a l i fi e d w o r k s h o p . Vertical windscreen wiper
position
To retain the effectiveness of the
" fl a t - b l a d e " w i p e r b l a d e s , i t i s a d -
visable to:
- handle them with care,
- clean them regularly using soapy water,
- not use them to hold a sheet of cardboard against the
windscreen,
- r e p l a c e t h e m a t t h e fi r s t s i g n s of wear.
Do not cover the rain sensor,
linked with the sunshine sensor
and located in the centre of the
windscreen behind the rear view
mirror.
Switch off the automatic wiping
when using an automatic car
wash.
In winter, it is advisable to wait
until the windscreen is complete-
ly clear of ice before activating
the automatic wiping.
The automatic wiping must be re-
activated if the ignition has been
off for more than one minute, by
pushing stalk
A downwards.
This position allows the wiper blades to
be lifted for winter parking, cleaning or re-
placement without damaging the bonnet.
In the minute following switching off of
the ignition, any action on the wiper
stalk positions the wipers vertically.
To park the wipers after this has been
done, switch on the ignition and operate
the wiper stalk.
This is controlled manually by the driv-
er by pushing stalk
A to the "AUTO"
position.
This is controlled manually by the driver
by moving stalk A upwards, returning it
to position "0" . It is accompanied by the indica-
tor lamp in the instrument panel
going off and a message in the
multifunction screen.
It is accompanied by the illumina-
tion of this indicator lamp in the
instrument panel and a message
in the multifunction screen.
Page 134 of 235
1 0
CHECKS
BONNET
Protects the components of the engine
and provides access for checking levels.
Opening
Push the exterior safety catch B to
the left and raise the bonnet.
Unclip the bonnet stay C from its
housing, holding it by its foam pro-
tection.
Fix the stay in the notch to hold the
bonnet open.
The location of the interior re-
lease lever prevents opening of
the bonnet while the front left
door is closed.
Closing
Take the stay out of the support
notch.
Clip the stay in its housing.
Lower the bonnet and release it at
the end of its travel.
Pull on the bonnet to check that it is
fully latched.
RUNNING OUT OF FUEL
(DIESEL)
I f y o u r v e h i c l e i s fi t t e d w i t h a n H D I e n -
gine, the fuel system must be primed if
you run out of fuel.
This system consists of a priming pump
and a transparent pipe under the bonnet.
F i l l t h e f u e l t a n k w i t h a t l e a s t fi v e l i t r e s
of Diesel.
Open the bonnet.
Depending on version, unclip the
cover to gain access to the priming
pump.
Squeeze and release the priming
pump until resistance is felt (could
b e f r o m t h e fi r s t a p p l i c a t i o n ) a n d f u e l
appears in the transparent pipe with
the green connector.
Operate the starter until the engine
starts.
Depending on version, put the cover
back in position and clip it in place.
Close the bonnet.
If the engine does not start at the
fi r s t a t t e m p t , d o n o t t r y a g a i n .
Operate the priming pump again,
then the starter.
When the engine is hot, handle
the exterior safety catch and the
stay with care.
Before doing anything under the
bonnet, switch off the Stop &
Start system to avoid any risk of
injury resulting from an automatic
change to START mode.
Open the front left door.
Pull the interior release lever A ,
located at the bottom of the door
aperture.
Page 180 of 235
1 2
TECHNICAL DATA
The tyre pressures must be
checked when the tyres are cold,
at least once a month. Low tyre pressures increase fuel
consumption.
IDENTIFICATION MARKINGS
V a r i o u s v i s i b l e m a r k i n g s f o r t h e i d e n t i fi -
cation of your vehicle.
A . V e h i c l e i d e n t i fi c a t i o n n u m b e r ( V I N )
under the bonnet.
This number is engraved on the body-
work near the damper mounting.
B . V e h i c l e i d e n t i fi c a t i o n n u m b e r o n
the dashboard.
This number is indicated on a self-ad-
hesive label which is visible through the
windscreen.
C. Manufacturer's label.
The VIN is indicated on a self-destroy-
i n g l a b e l a f fi x e d t o t h e l e f t h a n d c e n t r e
pillar.
D. Tyre/paint label.
T h i s l a b e l i s a f fi x e d t o t h e l e f t h a n d c e n -
tre pillar.
It bears the following information:
- the tyre pressures, for unladen and laden conditions,
- the wheel rim and tyre sizes,
- the brands of tyre recommended by the manufacturer,
- t h e s p a r e t y r e i n fl a t i o n p r e s s u r e ,
- the paint colour code.
W h e e l s w h i c h a r e fi t t e d w i t h
2 0 5 / 4 5 R 1 7 t y r e s c a n n o t b e fi t -
ted with snow chains. For more
information, contact a CITROËN
d e a l e r o r a q u a l i fi e d w o r k s h o p .