2010.5 Citroen C CROSSER DAG back seat
[x] Cancel search: back seatPage 36 of 217
II
!
C O M F O R T
48
FRONT SEATS
F o r w a r d s - b a c k w a r d s a d j u s t m e n t
Raise the control bar and slide the seat
f o r w a r d s o r b a c k w a r d s .
When your seat is at the correct dis-
tance, move it forwards and backwards
slightly without using the control bar to
c h e c k t h a t i t i s s e c u r e d c o r r e c t l y . Driver's seat cushion height and
angle adjustment
P u l l a n d / o r p u s h t h e c o n t r o l s e v e r a l
t i m e s t o a d j u s t t h e h e i g h t o f t h e s e a t .
Seat back angle adjustment
P u l l t h e c o n t r o l u p w a r d s t o a d j u s t t h e
s e a t b a c k .
When the seat back is at the correct angle,
r e l e a s e t h e c o n t r o l .
Manual mode
T o p r e v e n t t h e s e a t b a c k f r o m
m o v i n g f o r w a r d s h a r p l y a n d
k n o c k i n g y o u , p r e s s o n i t w i t h
y o u r b a c k o r p u s h i t w i t h y o u r h a n d
w h i l e o p e r a t i n g t h e l e v e r .
Page 37 of 217
II
C O M F O R T
49
Electric mode (driver's seat only)
F o r w a r d s - b a c k w a r d s a d j u s t m e n t
Push the control forwards or rearwards to
m o v e t h e s e a t t o t h e p o s i t i o n r e q u i r e d . Driver's seat cushion height and
angle adjustment
P u l l o r p u s h t h e f r o n t o f t h e c o n t r o l t o r a i s e
o r l o w e r t h e f r o n t o f t h e s e a t c u s h i o n .
P u l l o r p u s h t h e r e a r o f t h e c o n t r o l t o r a i s e
o r l o w e r t h e r e a r o f t h e s e a t c u s h i o n .
P u l l o r p u s h t h e e n t i r e c o n t r o l t o r a i s e o r
l o w e r t h e e n t i r e s e a t c u s h i o n . Seat back angle adjustment
Tilt the control forwards or rearwards to
s t r a i g h t e n o r t i l t t h e s e a t b a c k .
FRONT SEATS
To avoid discharging the battery, use
the electric mode with the engine
r u n n i n g .
Page 39 of 217
II!
C O M F O R T
51
REAR SEATS (ROW 2)
Seat back angle adjustment
P u l l t h e c o n t r o l a n d a d j u s t .
When the seat back is at the correct angle,
r e l e a s e t h e c o n t r o l .
Sit in the centre of the rear bench seat
to check that the two seats are at the
same level and that the angle of their
s e a t b a c k s i s t h e s a m e .
F o r w a r d s - b a c k w a r d s a d j u s t m e n t
Pull the control towards the outside and
a d j u s t .
When your seat is at the correct dis-
t a n c e , r e l e a s e t h e c o n t r o l .
To ensure that the seat is secured cor-
rectly, move it forwards and backwards
s l i g h t l y w i t h o u t u s i n g t h e c o n t r o l . W h e n o p e r a t i n g t h e s e a t s , e n -
s u r e t h a t n o p e r s o n o r o b j e c t
is in the vicinity of the moving
p a r t s t o a v o i d a n y r i s k o f i n j u r y o r
d a m a g e .
T o p r e v e n t t h e s e a t b a c k f r o m m o v i n g
f o r w a r d s s h a r p l y a n d k n o c k i n g y o u ,
p r e s s o n i t w i t h y o u r b a c k o r p u s h i t w i t h
y o u r h a n d w h i l e o p e r a t i n g t h e l e v e r .
The rear seats can be folded in two
p a r t s ( 1 / 3 - 2 / 3 ) .
Page 44 of 217
II
C O M F O R T
56
REAR BENCH SEAT (ROW 3)
T h e r e a r b e n c h s e a t c a n b e f o l d e d . I t i s
s t o w e d i n a l o c a t i o n i n t h e fl o o r o f t h e
v e h i c l e . The label on the bench seat back illus-
t r a t e s t h e v a r i o u s s t e p s t o t h e f o l l o w e d
when unfolding and folding the rear
b e n c h s e a t .
1. O p e n t h e t a i l g a t e a n d t h e l o w e r t a i l -
g a t e ( r e f e r t o t h e " A c c e s s " s e c t i o n ) .
2. Pull the cover A from the rear and
fi x i t t o t h e s e a t b a c k u s i n g t h e p r e s s
stud of the band B .
Unfolding the bench seat
For comfort, it is advisable to stow
t h e b e n c h s e a t w h e n i t s i s n o t i s u s e .
Page 46 of 217
II
C O M F O R T
58
1. O p e n t h e t a i l g a t e a n d t h e l o w e r t a i l -
g a t e ( r e f e r t o t h e " A c c e s s " s e c t i o n ) .
2. Lift the cover A a n d fi x i t t o t h e s e a t
b a c k u s i n g t h e p r e s s s t u d o f t h e
band B .
3. Unlock the head restraints by slid-
ing the controls C and fold them
o n t o t h e s e a t b a c k .
4. P u l l t h e g r e y s t r a p D and bring the
b e n c h s e a t t o w a r d s y o u . P r e s s o n
t h e b e n c h s e a t t o l o c k i t .
5. T i l t a n d p u s h t h e b e n c h s e a t f o r -
w a r d s .
6. P u l l t h e b l a c k s t r a p E located at the
centre of the seat back to fold the
s e a t b a c k .
U n d o t h e p r e s s s t u d o f t h e b a n d B to
p u t t h e c o v e r b a c k i n p l a c e .
Folding the bench seat
Page 71 of 217
III
79
"Tailgate open" warning
This warning lamp comes on
on the instrument panel screen
when the tailgate is not closed
correctly. LOWER TAILGATE
Opening
Push the handle C to the right and
tilt the tailgate D gently.
Closing
Raise the tailgate D , push it to close
it, then check that it is secured
correctly. Before opening the tailgate, ensure
that no one is within the radius of
opening.
For reasons of safety and correct op-
eration, do not drive with the tailgate
open.
If the battery is disconnected, the
tailgate cannot be opened.
Do not climb onto the lower tailgate
and do not subject it to heavy knocks,
it may be damaged.
Always close the lower tailgate and
check that it is secured correctly be-
fore closing the main tailgate.
When closing the lower tailgate, en-
sure that no person or object is in the
proximity of the moving parts to avoid
any risk of injury or damage.
Do not open the lower tailgate when
a t o w b a r i s fi t t e d .
Maximum authorised weight on the
lower tailgate when open:
200 kg .
Tailgate release
This enables the tailgate to be unlocked
in the event of a central locking fault.
- Fold back the rear seats to gain ac-
cess to the tailgate release from in-
side the boot.
- Remove the plastic cap from the opening A in the tailgate interior
pillar.
- Move the control B to the right to
unlock and open the tailgate.
Page 72 of 217
III
79
"Tailgate open" warning
This warning lamp comes on
on the instrument panel screen
when the tailgate is not closed
correctly. LOWER TAILGATE
Opening
Push the handle C to the right and
tilt the tailgate D gently.
Closing
Raise the tailgate D , push it to close
it, then check that it is secured
correctly. Before opening the tailgate, ensure
that no one is within the radius of
opening.
For reasons of safety and correct op-
eration, do not drive with the tailgate
open.
If the battery is disconnected, the
tailgate cannot be opened.
Do not climb onto the lower tailgate
and do not subject it to heavy knocks,
it may be damaged.
Always close the lower tailgate and
check that it is secured correctly be-
fore closing the main tailgate.
When closing the lower tailgate, en-
sure that no person or object is in the
proximity of the moving parts to avoid
any risk of injury or damage.
Do not open the lower tailgate when
a t o w b a r i s fi t t e d .
Maximum authorised weight on the
lower tailgate when open:
200 kg .
Tailgate release
This enables the tailgate to be unlocked
in the event of a central locking fault.
- Fold back the rear seats to gain ac-
cess to the tailgate release from in-
side the boot.
- Remove the plastic cap from the opening A in the tailgate interior
pillar.
- Move the control B to the right to
unlock and open the tailgate.
Page 126 of 217
IX
P R A C T I C A L I N F O R M A T I O N
130
Fixing the "space-saver" spare
wheel
I f y o u r v e h i c l e i s fi t t e d w i t h a l l o y
wheels, it is normal to notice that the
washers do not come into contact
w i t h t h e " s p a c e - s a v e r " s p a r e w h e e l
w h e n t i g h t e n i n g t h e b o l t s o n fi t t i n g .
T h e w h e e l i s r e t a i n e d b y t h e c o n i c a l
contact of each bolt.
Access to the spare wheel in the 7 seat configuration
The "space-
saver
" s p a r e w h e e l i s i n -
s t a l l e d o n t h e o u t s i d e , u n d e r t h e b o o t ,
s u p p o r t e d b y a m e t a l c a r r i e r .
T o g a i n a c c e s s t o t h e t o o l s , r e f e r t o t h e
" A c c e s s t o t h e t o o l s " p a r a g r a p h . Putting the wheel back in place
P u t t h e w h e e l b a c k i n p l a c e i n i t s
carrier.
Lift the carrier C a n d r e p o s i t i o n t h e
hook D .
O p e n t h e l o w e r t a i l g a t e ( r e f e r t o t h e
"Access" section).
R e m o v e t h e p l a s t i c c o v e r A u s i n g
the handle 3 .
U n s c r e w t h e s p a r e w h e e l c a r r i e r r e -
t a i n i n g b o l t B u s i n g t h e w h e e l b r a c e 1 .
C l o s e t h e l o w e r t a i l g a t e ( r e f e r t o t h e
"Access" section).
Lift the carrier C to detach the hook D
then allow it to lower.
T i g h t e n t h e s p a r e w h e e l c a r r i e r r e -
t a i n i n g b o l t B f u l l y u s i n g t h e w h e e l -
brace 1 .
R e fi t t h e p l a s t i c c o v e r A , close the
l o w e r t a i l g a t e a n d s t o r e t h e t o o l s .
Removing the wheel
O p e n t h e t a i l g a t e a n d t h e l o w e r t a i l -
g a t e ( r e f e r t o t h e " A c c e s s " s e c t i o n ) .
T a k e o u t t h e h a n d l e 3 (refer to the
" A c c e s s t o t h e t o o l s " p a r a g r a p h ) .