10 AudioRadio functions HU-650/HU-850
10220
The volume level for the auxiliary device can
now be adjusted.
Press EXIT to save the setting and exit the
menu.Sound settings
G027191
Optimal sound reproductionThe audio system is calibrated for optimal
sound reproduction through the use of digital
signal processing. This calibration takes into
account the speakers, amplifier, cabin acous-
tics, the seating position of the listener, etc., for
each combination of vehicle and audio system.
There is also dynamic calibration that takes
into account the setting of the volume control,radio reception, and the vehicle's speed. The
sound settings described in this manual, such
as
BASS
,TREBLE
, and
EQUALIZER
are only
intended to enable the user to adapt sound
reproduction to his/her personal preferences.
Bass
Adjust the bass by pressing the button to
extend the control and turning it to the left (less
bass) or to the right (more bass). A "detent"
indicates "equalized" bass. Press the button
back in when you have made the adjustment.
Treble
Adjust the treble by pressing the button to
extend the control and turning it to the left (less
treble), or to the right (more treble). A "detent"
indicates "equalized" treble. Press the button
back in when you have made the adjustment.
Fader - Balance front/rear
Adjust front/rear speaker balance by pressing
the button to extend the control and turning it
to the left (more sound from the rear speakers)
or to the right (more sound from the front
speakers). A "detent" indicates "equalized"
balance. Press the button back in when you
have made the adjustment.
Balance right/left
Adjust left/right speaker balance by pressing
the button to extend the control, and turning itto the left (more sound from the left speakers)
or to the right (more sound from the right
speakers). A "detent" indicates "equalized"
balance. Press the button back in when you
have made the adjustment.
MID EQ level
This function is used to fine-tune the balance
of sound in the speakers. To set the level:
1.
PressSOURCE.
2.
Turn the SOURCE knob, select
ADVANCED MENU
and press SOURCE.
3.
Turn the SOURCE knob, select
AUDIO
SETTINGS
and press SOURCE.
4.
Turn the SOURCE knob, select
MID EQ
LEVEL
and press SOURCE.
5.
Turn the SOURCE knob, select the desired
level and press SOURCE.
6.
PressEXIT.
10 Audio
Radio functions HU-650/HU-850
10 ` `221 Selecting a sound source
The sound source (e.g. AM,
FM, etc.) can be selected in two
ways:
•
Use the sound source buttons (see the
center illustration above).
•
Turn the SOURCE knob (see illustration) to
select a sound source (AM1, AM2, FM1,
FM2, FM3, or CD). Press the knob to select
theAM or FMband of your choice.
The sound source selected will be shown in the
display.
Scan
Press the SCAN button to start
the station scan function. When
a station is found, scanning
stops for approximately 10 sec-
onds, after which scanning will
continue.
Press the SCAN or SOURCE button when a
station has been found if you would like to lis-
ten to that station and to discontinue the scan
function.
Station seek up/downPress
or
to start the seek func-
tion. The radio seeks the next audible station
and tunes it in. Repeat the procedure to con-
tinue the seek function.
Manual station searchPress
or
and hold it down.
MAN will be shown in the display. The radio
scans slowly in the selected direction and will
increase the scanning speed after a few sec-
onds. Release the button when the desired
frequency appears in the display.
The frequency can be fine-tuned by short
presses on the or
keys.
The system will remain in manual search mode
for 5 seconds after the button is released, after
which it will return to seek mode.
Steering wheel key pad (option)
G027901
If the vehicle is equipped with the key pad in
the steering wheel press the right or left arrow
to switch between preset stations.
