Downloaded from www.Manualslib.com manuals search engine Button on the multifunc-
Function tion steering wheel Action 
~Fig.168 
Current speed is stored and contr olled. 
If ACC is already active: 
Press the (ill) butt on  on  the 
Press briefly : reduce speed  by 1 km/h (1 m ph) 
and  store. 
A c
tivating  the ACC. multifun ction  stee ring Press and hold: the stored  speed is reduced 
wh eel. continuously in steps of 1 km /h (1 m ph) for a s 
long as  the  button is pressed . A  reduction in 
speed  is achieved by accelerator  release or au. 
tomatic  braking. 
Press  the 
§;) button  on the -
multifunction  stee ring  
wheel. .'i 
Switching  off ACC tempo -OR: depress  the  brake Control is switched off temporarily . The speed is i::: 
r a rily . ped al. stored  in the memory. 0 
:! 
OR: depress  the clutch 
pedal 
for  longer  than <' 
30 seconds. 
The stored  speed is reactivated  and 
controlled. 
If no  speed  has been  stored  yet, the ACC re-tr 
cords  and controls  the actual  speed. i) 
Press  the [Res) button  on the If ACC is already active: i!: 
Resuming ACC  control. multifunction  steering Press  briefly : increase  speed by 1 km/h  (1 mph) ~· !'· 
wheel. and  store . [~ 
Press and hold: the stored  speed is increased 
continuously  in steps of 1 km /h (1 mph) for as 
long as  the  button  is pressed . -
Press briefly: increase  speed in increments of 
l'• 
Press  the GJ button  on the 
Accelerating  (during ACC 10 km/h (5 m ph)  and  store . 
mult ifunction  steering 
Press and hold: the  stored  speed will be in-
control) . 
wheel. creased  in steps of 10 km/h  (5 mph) for as long 
as  the  button  is pressed . 
Press briefly: reduce  speed in increments of ~i 
Press  the 8 button  on the 
10 km/h  (5  m ph)  and  store . 
Decelerating  (during 
ACC Press and hold: the stored  speed will be re-) 
multifunction  steering 
duced in steps of 10 km/h  (5 m ph)  for as lo~Q as control) . wheel. the button  is pressed . A  reduct ion in speed ~s 
achieved  by accelerator  release or automatiC ~f 
braking. 
Press  the 
§;) button  on the 
The system  is switched  off. The  stored 
speed Switching  off the ACC . multifunction  steering 
wheel.  will be deleted. 
The  mph figures  given in brackets  in the 
table re-r ated away . ACC ready for start can be rea~ 1v
168. 
late  exclusively to instrument clusters with mile or extended  by pressing  the (RES) button ~Fig. :; 
readings. lt is displayed  for approximately  3 seconds . 
,, 
Stop-and-go traffic and the vehicle longer 
If the display ACC ready for start is n~ 11 If 
automatically pulling away d ' t1ca Y· ~ !Splayed , the vehicle will not start automa ca n ( 
If the ACC ready for start driver  message  is the vehicle ahead 
has already  moved on, you bY " c 
pull off  by pressing  the (RES) button ~Fig. 168 ~~n ~ 
displayed in the instrument cluster and  the vehicle ...... 
ahead  starts to move,  the vehicle  will also pull depressing  the accelerator  briefly. The ACC t ' ~ ..... 
continues  regulating. C"J ...... 
~· 
f); 
230 1 While drivin g   
Downloaded from www.Manualslib.com manuals search engine ere is  oncomin g traffic . • If 
 en loads or attachment parts on other vehi-
• tru e to  the  side, rear or above the normal .e s h. I ~-ers s of he ve ICe. 
C ity emergency brake function 
rl'i1 First read and observe the introductory 
L-WJ information and safety warnings A on 
page 235 . 
e city emerg ency  brake function  is  part of the 
a'Ba monitorin g system  (Front Assist)  and  is  act ive 
"' .en Front  Ass ist  is  s witched on. 
The c· emerg ency brake function gathers in  for 
ma ·on on the traffic  situation up  to a distance of 
about 10 m  in  front of the vehicle with in a speed 
ra ge  of  abo ut 5 km/h  (3 mph) to 30 km /h 
(  9 mph). 
e  system  prepare s the vehicle for emergency 
bra in g if it detects  a possib le colli sion with  a vehi -
eahead ~~-
If the  dr iver  does  not react to a possib le serious 
collis ion, the s ystem can  autom atically  stop the ve
h i
cle  with bra ke  pressure with  increas ing  intensit y 
so as to reduce the  s peed in a possib le co llision . 
Hence the s ys tem  can help min im ise the  conse
quences of an accident. 
A WARNING 
The intelligent technology of the city emer
gency  brake function cannot change the laws 
of physics. The driver is always responsible 
for  braking in time. 
• Adapt your speed and distance from the 
Vehicles  ahead to suit visibility, weather, road 
an d  traffic conditions. 
• The city emergency brake function cannot 
Prevent accidents and serious injuries by itself '---" ----------------------------~ 
A WARNING (Continued) 
• The city emergency brake function can 
carry out unwanted brake interventions in 
certain complex driving situations, e.g. at 
traffic islands, building sites and metal 
tracks. 
• Front Assist can issue unnecessary warn
ings and carry out unwanted braking inter
ventions when its function is impaired, e .g . if 
the position of the radar sensor has been 
changed. 
• While the vehicle is in motion, Front As
sist does not react to persons, animals and 
vehicles crossing or approaching in the same 
lane. 
m The  brake  pedal travel decreases when the 
~ city emergency  brake function  is triggered . 
This 
may make  the brake pedal  feel stiffer. 
m Automatic  brake intervention by the  city 
~ emergency  brake fun ction  can be stopped by 
using  the clutch , the accelerator or steering inter
vent ion. 
m The  city emergency  brake function can brake 
~ the vehicle to a standstill. The vehicle  will not 
be held  permanently by the braking  system. De
press the  brake. 
m Switch off Front  Assist  and the city emergen
~ cy brake  functio n  in  the event of multiple un
wanted  interventions . Proceed to a qualified work
shop . Volkswagen  recommends  using a Volkswa-
gen dealership  for this  purpose . 
Driver assist systems 239