2009 TOYOTA SEQUOIA Navigation Manual

DESTINATION SEARCH
50
SELECTING FROM THE NEAREST 5
CITIES
1. Touch “Nearest 5 Cities”.
2U5020F
2. Touch the touchscreen button of
the desired city name from the dis-
played list.
The current screen changes to the screen
for inputting a house number or a street
name. (See “(a) Inputting a house number
and a street name” on page 47.)SELECTING FROM THE LAST 5 CITIES
2U5021F
Touch the touchscreen button of the
desired city name.
If the navigation has never been used, no
cities will be displayed on the screen.
The current screen changes to the screen
for inputting a house number or a street
name. (See “(a) Inputting a house number
and a street name” on page 47.)

DESTINATION SEARCH
51
1. Push the “DEST” button.
2. Touch “POI Name” on the
“Destination” screen.
2U5022F
3. Input the name of the Point of Inter-
est.
2U5023F
4. Touch the touchscreen button of
the desired destination.
The screen changes and displays the map
location of the selected destination and the
route preference. (See “Starting route
guidance” on page 63.)
When inputting the name of a specific
Point of Interest, and there are two or more
sites with the same name, the list screen
is displayed.
2U5024F
Touch the touchscreen button of the
desired destination.
If the same name exists in more than one
city, a search can be performed more
easily with “City” and “Category” . (See
“(a) Selecting a city to search” on page 52
and “(b) Selecting from the categories” on
page 54.)
INFORMATION
The desired Point of Interest can be
displayed on the map screen. (See “
— Display POI icons” on page 80.)
— Destination search by
“POI Name”

DESTINATION SEARCH
52
(a) Selecting a city to search
2U5025F
Touch “City”.
2U5026F
To search by city, the following three meth-
ods are possible.
1. Input the city name
2. Select from the nearest 5 cities
3. Select from the last 5 cities
INFORMATION
To change the search area, touch
“Search Area”.
To cancel the city setting, touch
“Any City”.
INPUTTING THE CITY NAME
1. Touch “Input City Name”.
2U5027F
2. Input the city name.
2U5028F
3. Touch the touchscreen button of
the desired city name from the dis-
played list.

DESTINATION SEARCH
53
SELECTING FROM THE NEAREST 5
CITIES
1. Touch “Nearest 5 Cities”.
2U5029F
2. Touch the touchscreen button of
the desired city name.SELECTING F
ROM THE LAST 5 CITIES
2U5030F
Touch the touchscreen button of the
desired city name.
If the navigation has never been used, no
cities will be displayed on the screen.

DESTINATION SEARCH
54
(b) Selecting from the categories
2U5031F
Touch “Category”.
2U5032F
If the desired POI category is on the
screen, touch the name to display a de-
tailed list of the POI category.
If the desired POI category is not on the
screen, touch “List All Categories” to list
all POI categories.
2U5034F
When the desired category is touched, the
POI name list screen is displayed. The destination can be set by selecting the
search point and the POI category.
1. Push the “DEST” button.
2. Touch “POI Category” on the
“Destination” screen.
2U5035F
Set the search point by the following
method:
1. Input the city center
2. Set the current position as the search
point
3. Set the search point via the map screen
4. Set the search point from any destina-
tion
It is possible to display the names of POIs
located within approximately 20 miles (32
km) from the selected search point.
— Destination search by
“POI Category”

DESTINATION SEARCH
55
INPUTTING THE CITY CENTER
1. Touch “Input City Center”.
2U5036F
2. Input the city center name.
2U5037F
3. Touch the touchscreen button of
the desired city center name.
2U5038F
When an arrow facing the desired point is
touched, the map scrolls in that direction.
Releasing the finger from the arrow will
stop the scrolling
4. Touch “Enter”.
The search point is set and the “POI
Category” screen will be displayed.SETTING
THE CURRENT POSITION AS
THE SEARCH POINT
Touch “Current Position”.
The search point is set at the current posi-
tion, and the “POI Category” screen will be
displayed.

DESTINATION SEARCH
56
SETTING THE SEARCH POINT VIA THE
MAP SCREEN
1. Touch “Map”.
2U5039F
When an arrow facing the desired point is
touched, the map scrolls in that direction.
Releasing the finger from the arrow will
stop the scrolling
2. Touch “Enter”.
The search point is set and the “POI
Category” screen will be displayed. SETTING THE SEARCH POINT FROM
DESTINATIONS
1. Touch
the destination buttons at the
bottom of the screen.
2U5040F
When an arrow facing the desired point is
touched, the map scrolls in that direction.
Releasing the finger from the arrow will
stop the scrolling
2. Touch “Enter”.
The search point is set and the “POI
Category” screen will be displayed.

DESTINATION SEARCH
57

To search POIs near the search
point
When the search point is set, the “POI
Category” screen will be displayed.
2U5041F
Select the desired POI categories.
“List”: If the desired POI categories have
already been selected, a list of POI will be
displayed from among the selected cate-
gories.
The selected category icon appears on the
top left of the screen.
If the desired POI category is not on the
screen, touch “List All Categories” to list
all POI categories.
2U5042F
Select the desired POI categories from
the list and touch “OK”.
The selected category icon appears on the
top left of the screen.
2U5043F
“Select Category”: To return to the POI
category selection screen.
“Show List”: To display the list of POIs in
the selected categories.
2U5044F
By touching the touch− screen button of the
desired item, the screen changes and dis-
plays the map location of the selected des-
tination and the route preference. (See
“Starting route guidance” on page 63.)
“On Route”: When the indicator is illumi-
nated by touching this touch −screen but-
ton, the list of the items searched along the
route is displayed.