
Seats and Stowage
90
Pulling out – Pull the foldable luggage compartment cover in direction of arrow
as far as the stop into the secured position
⇒
fig. 99
.
Folding – Press the cover in the handle area
in direction of arrow , the cover
rolls up automatically.
Removing – Have the foldable luggage compartment cover removed to transport
bulky goods by pressing the slider
from the side in the direction of
arrow and removing the cover in the direction of arrow ⇒
fig. 100
.
WARNING
No objects should be placed
on the luggage compartment cover.
Caution
Please ensure that the heating elements of the rear window heater and the foldable luggage compartment cover are not damaged as
a result of objects placed in this
area.
Remove variable* loading floorThe variable loading floor makes handling of bulky items of luggage easier. You can remove the variable loading floor if necessary. – Unlock the loading floor by turning the safety eyes to the left by
approx. 90°
⇒
fig. 101
.
– Fold together the loading floor and take it out by moving in direction
of arrow.
– Unlock the carrier rail by turning the arbor-mounted fixing eyes
to the right by approx. 90°
⇒
fig. 102
.
Fig. 100 Luggage compart- ment: removing the foldable luggage compartment cover
A1
A2
A3
A4
Fig. 101 Luggage compart-ment: remove variable loading floorFig. 102 Luggage compart-ment: Install carrier rails
AA
AB
AC
se0.1.book Page 90 Friday, April 10, 2009 3:19 PM

Seats and Stowage
91
Using the system
Safety
Driving Tips
General Maintenance
Breakdown assistance
Technical Data
WARNING
Pay attention when installing the variab
le loading floor that the carrier rail
and the variable loading floor are correc
tly fastened. If this is not the case,
there is risk of injury for the occupants.
Note
The maximum load of the variable loading floor is 75°kg.Divide the luggage compartmen
t with variable loading floor*
The luggage compartment can be divided with the variable loading floor. – Lift up the part with the holder and secure it by sliding it into the
grooves
⇒
fig. 103
.
Net partition (Combi)*Use the net partition behind the rear seatsPulling out – Fold down the storage compartment cover behind the rear seats
⇒
fig. 104
.
– Pull the net partition at the bracket out of the housing in direc-
tion of the holders
⇒
fig. 105
.
– Insert the cross rod into one of the mounts and push the cross rod
forward.
Fig. 103 Luggage compart- ment: Separation of the luggage compartment
Fig. 104 Folding down the storage compartment coverFig. 105 Unrolling net parti-tion
AA
AB
AC
AC
se0.1.book Page 91 Friday, April 10, 2009 3:19 PM

Seats and Stowage
92
– In the same way, fix the cross rod to the other side of the vehicle,
mount .
– Fold the storage compar
tment cover downwards.
Folding – Fold down the storage compartment
cover behind the rear seats
⇒
fig. 104
.
– Pull the cross rod back slightly, first on the one side then on the other
side and take the cross rod out of the mount
⇒
fig. 105
.
–
Hold
the cross rod in such a way that the net partition can roll up
slowly and without damage into housing .
– Fold the storage compar
tment cover downwards.
If you wish to use the entire luggage compartment, you can remove the luggage compartment cover
⇒page 89, fig. 99
.
WARNING
•
First check for yourself that the cros
s road is inserted into the mounts
in the front position!•
Pay attention that the rear seat backrest is correctly interlocked. It is only
then that the three-point seat belt for the middle seat can reliably fulfil its function.
Use the net partition behind the front seatsPulling out – Fold the rear seats forwards
⇒
page 81
– Pull the net partiton net at the plate out of the housing
⇒
fig. 106
.
– Insert the cross rod into the mount first on the one side and push
the cross rod forward.
– In the same way, fix the cross rod to the other side of the vehicle,
mount .
Folding – Pull the cross rod back slightly, first on the one side then on the other
side and take the cross rod out of the mount
⇒
fig. 106
.
–
Hold
the cross rod in such a way that the net partition can roll up
slowly and without damage into housing .
– Fold the rear seats back into its original position.
AC
AC
AB
AC
Fig. 106 Unrolling net parti- tion
AA
AB
AC
AC
AC
AB
se0.1.book Page 92 Friday, April 10, 2009 3:19 PM

Seats and Stowage
93
Using the system
Safety
Driving Tips
General Maintenance
Breakdown assistance
Technical Data
WARNING
•
The belt locks and the belts must be in their original position after folding
back the seat cushions and the seat backrests - they must be ready to use.•
The seat backrests must be securely interlocked in position so that no
objects in the luggage compartment can
slide forward if there is sudden
braking - risk of injury!•
Pay attention that the rear seat backrest is correctly interlocked. It is only
then that the three-point seat belt for the middle seat can reliably fulfil its function.•
First check for yourself that the cross road is inserted into the mounts
in the front position!Removing and installing net partition housingRemoving – Fold the rear seats forwards
⇒
page 81
– Open the right rear door. – Push the net partition housing
⇒
fig. 107
in the direction of arrow
and take it out of the mounts of the rear seats in the direction of
arrow .
Installing – Position the net partition housing into the mounts of the rear seat
backrests.
– Push the net partition housing in
the opposite direction of arrow
as far as the stop.
– Fold the rear seats back into its original position.The roof rack*DescriptionPay attention to the following points if yo
u wish to transport luggage or other items
on the roof of your vehicle:•
A special roof luggage rack system was
developed for the vehicle, that is why
you should only use a roof luggage rack
which has been released for use by Škoda
Auto.•
The base carrier is the basis for a comple
te roof luggage rack system. Separate
additional holders are required for safety reasons for transporting luggage, bikes, surfboards, skis and boats.•
The basic version of the roof luggage rack system and further components are
obtainable as accessories from the authorised Škoda Service Partners.
Caution
•
If you use other roof rack sy
stems or if the roof bars are not properly fitted, then
any damage which may result to your ca
r is not covered by the warranty agree-
ments. It is therefore essential to pay attention to the fitting instructions supplied with the roof luggage rack system.•
On models fitted with a power sliding/tilting roof, ensure that the opened
sliding/tilting roof does not strike any items of luggage transported on the roof.•
Ensure that the opened boot lid does not collide with the roof load.
AC
Fig. 107 Rear seats: Net partition housing
AA
A1
A2
A1
se0.1.book Page 93 Friday, April 10, 2009 3:19 PM

Seats and Stowage
97
Using the system
Safety
Driving Tips
General Maintenance
Breakdown assistance
Technical Data
Rear ashtray - low centre consoleOpening ashtray – Grasp the ashtray cover at the lower edge and fold it open in the
direction of arrow
⇒
fig. 114
.
Removing ashtray – Grasp the ashtray at the handle and pull it out in an upward direc-
tion.
Replacing ashtray – Insert the ashtray into the console and press it in.
WARNING
Never lay flammable objects in the ashtray basin - risk of fire!
Rear ashtray - high centre console*Opening ashtray– Press on the top part of the cover of the ashtray in area
⇒
fig. 115
.
Removing ashtray insert – Press the cover of the ashtray down slightly as far as the stop. – Grasp the ashtray insert at the cover and pull it out. Insert ashtray insert – Insert the ashtray insert into the mount and press it in.There is a beverage holder attached to
the inner side of the ashtray cover.
WARNING
Never lay flammable objects in the ashtray basin - risk of fire!
Fig. 114 Low centre console: Rear ashtray
AA
AB
Fig. 115 High centre console: Rear ashtray
AA
AB
se0.1.book Page 97 Friday, April 10, 2009 3:19 PM

Seats and Stowage
99
Using the system
Safety
Driving Tips
General Maintenance
Breakdown assistance
Technical Data
– Connect the plug of the electr
ical appliance to the socket.
You can only use the power socket for the
connection of approved electrical acces-
sories with a power uptake up to 180 watts
. The vehicle battery will be discharged
in the process if the engine is stationary. The same remarks apply here as for
⇒page 98.
Further information
⇒page 244, “Accessorie
s, changes and replacement of
parts”.Storage compartmentsOverviewYou will find the following storage facilities in your vehicle:
WARNING
•
Please do not place anything on top of the dash panel. Such objects
might slide or fall down when driving
(when accelerating or cornering) and
may distract you from concentrating on the traffic situation - risk of acci- dent!•
Ensure that when driving no objects from the centre console of from
other storage possibilities may get into the footwell of the driver. You would then no longer be able to apply the br
akes, operate the clutch or accelerator
- risk of accident!Storage compartment on the front passenger sideOpening and closing the storage compartment on the front passenger side – Press the handle of the lid
⇒
fig. 118
- the lid folds down.
– Raise the lid and press it until the catch is heard to engage.
Storage compartment on the front passenger side
⇒ page 99
Storage compartment on the driver's side
⇒page 100
Storage compartment on the dash panel*
⇒page 101
Storage compartment in front centre console*
⇒page 101
Storage compartment for spectacles*
⇒page 102
Storage compartment in the front doors
⇒page 102
Storage compartment below front passenger seat*
⇒page 103
Front seat armrest with storage compartment*
⇒page 103
Rear armrest with storage compartment*
⇒page 104
Storage compartment in rear centre console*
⇒page 104
Seat backrest with opening for skis*
⇒page 105
Through-loading bag*
⇒page 105
Side compartment*
⇒page 106
Storage compartment behind the rear seats* (Combi)
⇒page 107
Clothes hooks*
⇒page 107
Fig. 118 Dash panel: Storage compartment on the front passenger side
se0.1.book Page 99 Friday, April 10, 2009 3:19 PM

Seats and Stowage
100
There is a holder for a pen and note book on the inside of the lid.
WARNING
•
The storage compartment must always
be closed when driving for safety
reasons.•
Do not place any beverages into the
cup holder while driving. Spilled
beverages can damage the electrical sy
stem and the upholstery. Hot bever-
ages may result in burns.Cooling of storage compar
tment on front passenger
side*The storage compartment is for vehi
cles fitted with an air-condi-
tioning system with a closable air supply.– Open or close the air supply using the control dial
⇒
fig. 119
.
Opening the air supply when the air conditioning system is switched on allows cooled air to flow into the storage compartment. Opening the air inlet when the air conditioning system is on causes fresh or interior air to flow into the storage compartment.
We recommend that you close the air supply
if it is operating in the heating mode
or if you are not using the cooling system for the storage compartment.Storage compartment on the driver's side– The storage compartment is opened by lifting the handle and folding
open in the direction of arrow
⇒
fig. 120
.
WARNING
The storage compartment mu
st always be closed when driving for safety
reasons.
Fig. 119 Storage compart- ment: Using cooling system
Fig. 120 Dash panel: Storage compartment on the driver's side
se0.1.book Page 100 Frida
y, April 10, 2009 3:19 PM

Seats and Stowage
101
Using the system
Safety
Driving Tips
General Maintenance
Breakdown assistance
Technical Data
Storage compartment on the dash panel*– Press in the middle of the storage compartment
⇒
fig. 121
- the lid
folds open
Certain model versions are equipped without lid for the storage compartment.
WARNING
•
The storage compartment is not a substitute for the ashtray and must
also not be used for such purposes - risk of fire!•
The pull-out storage compartment mu
st always be kept closed when
driving for safety reasons.•
Do not put any highly inflammable objects or objects which are sensitive
to heat (e.g. lighters, sprays, spectacl
es, carbonated drinks) in the storage
compartment.
Storage compartment in front centre console*– Press on the bottom part of the storage compartment in the area
⇒
fig. 122
- the lid opens.
WARNING
The storage compartment is not a substitute for the ashtray and must also not be used for such purposes - risk of fire!Storage net on the front centre console*
Fig. 121 Dash panel: Storage compartment
Fig. 122 Front centre console: Storage compart-ment
AA
Fig. 123 Front centre console: Storage net
se0.1.book Page 101 Frida
y, April 10, 2009 3:19 PM