2009 Seat Leon 5D radio

Quick Reference Guide11
Structure of the operating manual
The unit overview is at the beginning of the operating manual. Here the unit
buttons (hard keys) and additional control elements are explained in a brief
overview.
In the following manual, when the position of the control is described in
detail, a reference to the equipment overview and the number used to distin-
guish it will be used. In the following figures of the manual, only the the
content of the screens will be shown.
At the beginning of each main chapter, there is an overview with a brief expla-
nation of the functions available. An explanation of the individual steps can
be found in the following chapters.
Altered display appearance
The unit's software may have been modified with vehicle-specific updates
since the publication of this operating manual. if this is the case, the names
of certain function button and the display colours may differ from the descrip-
tions given in this operating manual.Resetting the unit to the factory settingsIt is possible to reset the radio-navigation system to its orig-
inal state as described in this manual.If changes have already been made to the basic settings, you may
find that some aspects of the unit's operation differ from the
descriptions given in this manual. We therefore recommend that you
reset the unit to the factory settings if you are operating it for the first
time.
– Press the function selection button on the right of the unit page 3, fig. 1 . – Press the function button on the screen.
– This opens the system settings menu. Now press the
function button.
– You are then asked to confirm the command. Press the func- tion button at the bottom left of the screen to confirm.
Note
Please not that resetting to the factory settings will erase all previously
entered data and settings. Any destinations you have saved or navigated to
will also be deleted!
SETUP
A2
System
Factory settings
Ye s
media_system_ingles.book Seite 11 Donnerstag, 5. Februar 2009 3:31 15

RADIO function selection button
14RADIO function selection buttonRadio modeSelecting the RADIO main menu and the frequency band
Press the button to open the RADIO main menu and to
change the frequency band.Opening the RADIO main menu
– Press the button to open the RADIO main menu. The
station you are currently listening to is shown in the middle of the
screen fig. 7. With RDS-compatible
6) stations, the station
name is displayed if reception is strong enough, e.g. “Radio 2 ”.Changing frequency band
–In the RADIO
main menu, press the button to change the
frequency band. The currently se lected frequency band (FM or
AM) is indicated above the station name and in the bottom line
of the screen fig. 7.
– Alternatively, in the RADIO main menu, you can change
frequency band by pressing the function button for the
desired frequency band page 15, fig. 8 .
The AM and FM frequency bands
The AM frequency band (amplitude modulation) is equivalent to the medium
wave frequency band. The FM frequency band (frequency modulation) is
equivalent to very high frequency.
6)“ R adio Data System” - is used to transmit programme identifiers and additional serv-
ices page 21
RADIO
Fig. 7 RADIO main menu.
RADIO
RADIOBand
media_system_ingles.book Seite 14 Donnerstag, 5. Februar 2009 3:31 15

RADIO function selection button15
Changing and selecting radio stations
You can switch through all stations that can currently be
received one after the other. All FM radio stations with a
strong reception are stored in the FM station list and can be
selected individually from the list.
Open the RADIO main menu  page 14.
Automatically changing radio station
– Briefly press the arrow buttons or page 3, fig. 1 to
change to the next receivable station on the current frequency
band.
–If TP is displayed on the screen, you will only receive stations that
support the traffic news function (TP page 23) or EON
 page 24, “EON (Enhanced Other Network)”.
–If “
  ” is displayed in the RADIO main menu page 20,
fig. 15 , press the arrow buttons only changes to stored stations
 page 21.
Opening the FM station list
– Change to the FM frequency band page 14.
Fig. 8 RADIO main menu:
Band function button.
Fig. 9 FM station list:
Radio 2 currently playing.


A3
media_system_ingles.book Seite 15 Donnerstag, 5. Februar 2009 3:31 15

RADIO function selection button
16
– Press the function button and in the pop-up window that opens press page 15, fig. 8 to view a list of all
currently receivable stations on the FM frequency band. The list
“jumps” straight to the position of the station you are currently
listening to page 15, fig. 9 “Radio 2”.
– Alternatively, you can open the FM station list by turning the setting knob page 3, fig. 1 if in the RADIO main menu the
station buttons are currently not displayed page 19,
“Switching the station button display on and off”.
Selecting stations from the FM station list
– When you have opened the FM station list, turn the setting knob page 3, fig. 1 to mark the desired station.
– To call up the marked station, press the setting knob.
– Alternatively, you can search the list by dragging the scroll marker up or down page 10, “Moving the scroll marker on the
screen”.
– You can call up a station by pressing its name on the screen.
– Press the button at the bottom right of the unit page 3,
fig. 1 to close the FM station list.The FM station list view closes automatically after one minute of inactivity.
By pressing the page 15, fig. 9 button, you can store the currently
marked station in the station list to one of the “station buttons”. For details
of how to use the “station buttons”, please see page 19, “Storing radio
stations to “station buttons””. The unit regularly executes a search to check what stations can be received
and updates the FM station list accordingly. The FM station list can only be
updated when it is closed.
No station list is available for the AM frequency band.
Note
In vehicles with a window aerial, the re
ception could be impaired if foil or
metal-coated stickers are attached to the windows.
BandFM/List
A10
A10

A8
Store
media_system_ingles.book Seite 16 Donnerstag, 5. Februar 2009 3:31 15

RADIO function selection button17
Scan function
When the scan function is running, all stations with a strong
reception are played in sequence for 5 seconds each.
Open the RADIO main menu and select a frequency band
 page 14.
– Press the function button, followed by fig. 10 in
the pop-up window to start the scan function.
– While the scan function is running, the function button changes to fig. 11 .
– Press the function button again to stop the scan function at the station you are currently listening to.The scan function also stops when you manually select a station with the
arrow buttons or station buttons, or the scan is interrupted by a traffic
announcement.
The stations are scanned according to their order in the FM station list or on
the frequency band.
Fig. 10 RADIO main
menu: Extras function
button.Fig. 11 RADIO main menu
during Scan.
Extras
Scan
Extras
ScanScan
media_system_ingles.book Seite 17 Donnerstag, 5. Februar 2009 3:31 15

RADIO function selection button
18Tuning to radio stations manually
You can also tune to a radio station by manually selecting its
frequency.Open the RADIO main menu page 14.
– Press the function button, followed by in the pop- up window page 17, fig. 10 .
– The function button changes to and the frequency of the currently selected station is displayed in the
centre of the screen. If the station is RDS-compatible, the station
name is displayed below fig. 12 .
– To tune to the desired station's frequency, turn the setting knob page 3, fig. 1 . – Press and hold one of the arrow buttons on the unit
page 3,
fig. 1 to move quickly through the frequency band. Only
when you release the cursor button in question, the unit will tune
to the next available radio station.
– Briefly press the setting knob or the function button to end manual frequency selection.
After 10 seconds of inactivity, manual frequency selection is automatically
closed and the function button changes back to .
Manual frequency selection is also closed if you select a station with a station
button or switch to the FM station list view.
Fig. 12 Tuning to a radio
station manually
Extras
Manual
Extras
Manual
A10
A3
ManualExtras
media_system_ingles.book Seite 18 Donnerstag, 5. Februar 2009 3:31 15

RADIO function selection button19
Storing radio stations to “station buttons”
In the RADIO main menu, you can call up a view of the “station
buttons”, which are used to store radio stations.
Open the RADIO main menu  page 14.
Switching the station button display on and off
– Press the function button fig. 13 .
– In the pop-up window that opens, tick the checkbox in the function button by briefly pressing it page 8.
– Six additional numbered function buttons will now be displayed fig. 14 . In RADIO mode, these are the “station buttons”. If the
station buttons are not displayed , this may be because “Radio
text” is enabled page 21, “Switching radio text display on and
off”.
– You can mark the station buttons in sequence by turning the setting knob page 3, fig. 1 . The station store to the
marked station button appears on the screen.
– If you turn the setting knob past the last station button displayed on the screen, the next six station buttons will appear.
Storing stations
– Press and hold one of the six station buttons displayed on the screen for roughly 3 seconds until you hear a beep. The station
currently playing ( Radio 2) will then be stored to that station
button ( 4)  fig. 14 . This replaces any station previously stored
to that button.
– Alternatively, press and hold the setting knob for roughly 3 seconds. You will automatically be offered the next free station
button. Briefly press the setting knob to store the station
currently playing to that station button.
Fig. 13 RADIO main
menu: Extras function
button.Fig. 14 RADIO main menu
with station buttons
displayed.
Extras
Presets
A10
A10
media_system_ingles.book Seite 19 Donnerstag, 5. Februar 2009 3:31 15

RADIO function selection button
20You can also mark a certain station button by turning the setting knob. Then
press and hold the setting knob for roughly 3 seconds until you hear a beep.
The station currently playing will then be stored to the marked station button.
You can also select a station from the station list view and store it to a station
button by first pressing the function button page 15, fig. 9 .
There are 24 station buttons available for storing stations from both
frequency bands.
If the station you are currently listening to is stored to a station button, the
station button number is displayed next to the frequency band in the centre
of the screen ( fig. 15 FM: 4).
If an incorrect station name is displayed when you store a radio station,
please see page 22, “Changing stored radio station names”.
Note
In the RADIO main menu, it is not possible to display the station buttons while
radio text is displayed page 21.
Selecting stored radio stations
Use the station buttons on the screen to select stored radio
stations.
Store
Fig. 15 RADIO main menu
with station buttons
displayed.Fig. 16 Settings menu
(SETUP) for the RADIO
main menu.
media_system_ingles.book Seite 20 Donnerstag, 5. Februar 2009 3:31 15