2009 Seat Leon 5D phone

Communication
20Using the hands-free system from the multi-function control
The hands-free system can be activated using the multi-func-
tion control.As well as using the voice command system, it is possible to use the functions
of the hands-free system from the multi-function controls.
When connection is established between your mobile telephone and the
hands-free device, the phonebook in your telephone and/or your SIM card
(depending on the phone) is downloaded to the hands-free device.
Depending on the version, when the connection is established between your
mobile telephone and the hands-free device, the phonebook in the tele-
phone is downloaded to the hands-free device to recognise the contact of the
incoming call and the outgoing call. This phonebook cannot be managed
from the multi-function control. It cannot be viewed on the radio screen.
Fig. 10 Multi-function
control:
Sist Comunicacion_EN.book Seite 20 Mittwoch, 15. Juli 2009 6:45 18

Communication21
Controls and equipment
Example of incoming call An incoming call can be accepted by pressing the “answer call” button
⇒fig. 12 on the multi-function control and from the radio control
⇒ fig. 11 . If the number from which the incoming call is being made is associated with
a name in the existing phone book then the name will be displayed on the
radio display.
Fig. 11 Example of an incoming call from the radio
display
Fig. 12 Multi-function
control:
AE
AA
Sist Comunicacion_EN.book Seite 21 Mittwoch, 15. Juli 2009 6:45 18

Communication
22Information on radio displayAn incoming call is indicated on the display. To accept, press button on
the multifunction control or multi-function button on the radio ⇒
page 21, fig. 11 . To reject the call, press multi-function button on the
radio ⇒page 21, fig. 11 .
To cancel the outgoing call, press multi-function button on the radio
⇒ page 21, fig. 11 .
Information regarding the mobile phone coverage is displayed on the radio
display.
Dialogue
The voice command system can be activated with the “press
to talk” button, located on the multi-function control.In this manual, Dialogue is defined as the time in which the speech control
system may receive vocal commands and provide assistance for completion
of different functions in case the user is hesitant and unsure how to proceed.
The system also responds by vocal messages. The dialogue is started and
Fig. 13 Incoming callFig. 14 Outgoing phone
call
AE
AA
AB
ABFig. 15 Current phone
call
Sist Comunicacion_EN.book Seite 22 Mittwoch, 15. Juli 2009 6:45 18

Communication23
Controls and equipmentinterrupted by pressing the “press to talk” button
⇒page 21, fig. 12 or
by pressing on the radio screen.
If a call is received, then the dialogue is immediately interrupted. The call may
be accepted by pressing the key “answer” on the multi-function control.
Assistance from control commands when orders are not recognized.
If a command is not recognised by the system, it will answer with the cue
and the command can then be given once again clearly. After a
third failure the system will answer with and the dialogue will be
ended.
Note the following to ensure that you are properly understood:
•Speak in a normal tone and without pauses or exaggerated pronuncia-
tion.•Avoid poor articulation of words.•Keep the doors, windows and sun roof closed if possible to avoid back-
ground noises that might affect the system.•Keep the air vents directed away from the microphone (located on the
interior light).•At high speeds, you might need to speak louder to drown out background
noises.•Avoid other noises in the vehicle during a dialogue (e.g. other passengers
speaking in the vehicle).•Avoid speaking when the system is saying a cue.•The hands-free microphone is directed towards the driver, therefore, only
the driver should try to operate the system.•To make a call when there is heavy background noise we recommend
using the speech controlled telephone book instead of speaking individual
digits. This will help avoid mistakes when specifying telephone numbers.
Micro off
If, at any time, we do not wish to be heard by the person on the other end of
the line during a call, the vehicle microphone can be temporarily discon- nected. To do so, press the multi-function button on the radio
⇒page 21,
fig. 11 during the call.
To switch the microphone back on, press the multi-function button on the
radio again ⇒page 21, fig. 11 .
Controlling the hands-free unit by voice
The hands-free functions are also operated via voice
commands.Help commands
The system confirms acceptance of speech commands verbally and guides
you through the dialogue if necessary.
Commands for operating the hands-free system
AC
ok

Speech command
Action
HELP
Following this command the system announces
possible orders
Speech command
Action
DIAL NUMBER
After this command you can specify a telephone
number and establish a connection
REDIAL
After this command the last dialled telephone
number will be redialled
AA
AA
Sist Comunicacion_EN.book Seite 23 Mittwoch, 15. Juli 2009 6:45 18

Communication
24Speech commands for operating the internal telephone book:Control commands
The control commands are used to carry out functions that
have already been chosen.The control commands are used during or at the end of a dialogue to carry out
certain functions.
Possible commands
Dial number
A telephone number can be vocally specified to the system
and then dialled.– Press the talk button ⇒page 21, fig. 12 . Activation of the
system is confirmed with by a tone.
– After the tone, say the command DIAL NUMBER.After this command the system will then request you to specify a telephone
number. A connection will then be established to the specified number. The
telephone number can be specified all at once, in blocks of digits (separated
by a brief pause), or as single digits. You can specify the digits from zero to
nine . After each block of digits you specify (separated by a brief pause) the
system will repeat the digits. The system can only recognise single digits
(two, three, etc.), and not combinations of digits (e.g. twenty-three).
Speech command
Action
SELECT NAME
After this command, you can call a number that
has been recorded in the phone book under a
name.
STORE NAME
After this command you can store a name with a
telephone number in the phone book
DELETE NAME
After this command you can delete a name from
the phone book.
PLAY PHONE BOOK
After this command you can listen to the names
stored in the phone book
DELETE PHONE BOOK
After this command you can choose to delete the
entire phone book or just a single name
Speech command
Action
DIAL
Telephone number already entered is dialled.
STORE
A name is saved in the phonebook with its phone
number
CANCEL
Cancels a running dialogue.
REPEAT
The specified name or all of the digits specified
up to this point will be repeated. The system will
then give the cue so that you
can specify additional digits or commands.
CORRECTION
The specified name or the last entered block of
digits will be deleted. The system will then give
the cue so that you can specify
additional digits or commands.
ERASE
All specified digits will be deleted. The system
will then give the cue Please, proceed> so that you can specify new dig-
its or commands.AC
Sist Comunicacion_EN.book Seite 24 Mittwoch, 15. Juli 2009 6:45 18

Communication25
Controls and equipmentNotes on specifying telephone numbers:
•If the telephone number has more than 20 digits, the system will decline
and give the cue .•A Plus (+) can also be placed ahead of the 20 digits.
Example for entering a telephone number:
A running dialogue can be cancelled at any time by pressing the talk button ⇒ page 19, fig. 9 .
Redial– Press the talk button .
– After the tone, say the command REDIAL.After giving the command the last number dialled via the hands-free system
will be dialled again.
Example for the REDIAL command:
A running dialogue can be cancelled at any time by pressing the talk button
⇒ page 20, fig. 10 .To record names in the phone book
You can store names along with a telephone number in the
internal telephone book.– Press the talk button . The beep tone indicates that the system
is ready.
– After the tone, say the command STORE NAME.After giving the command the system will request you to specify a name and
telephone number to store in the internal telephone book. The telephone
Speech command
Condition
Message
Action
DIAL NUMBER
Phone switched
on
please?>
Dialogue
for example,
ZERO, SEVEN,
THREE, ONE
three, one>
Dialogue
If no command is specified, the system responds after about 5 seconds
with the next cue.No command
mands are: Dial,
repeat, back, or
you can specify
additional digits>
Dialogue
THREE, NINE,
TWO
two>
Dialogue
DIAL
being dialled.>
Dialogue -The tel-
ephone number
0731492 will be
dialledEnd of dialogue
AC
Speech command
Condition
Message
Action
REDIAL
Phone switched
on
being dialled.>
DialogueEnd of dialogue
AC
AC
AC
Sist Comunicacion_EN.book Seite 25 Mittwoch, 15. Juli 2009 6:45 18

Communication
26book has enough memory for 50 names and numbers. You can specify the
digits from zero to nine .
The telephone number can be specified all at once, in blocks of digits (sepa-
rated by a brief pause), or as single digits. After each block of digits you
specify (separated by a brief pause) the system will repeat the digits. The
system can only recognise single digits (two, three, etc.), and not combina-
tions of digits (e.g. twenty-three).
Say STORE to store the entry into the telephone book.
A running dialogue can be cancelled at any time by pressing the talk button ⇒ page 20, fig. 10.
Note
•If the telephone number has more than 20 digits, the system will decline
and give the cue .•A Plus (+) can also be placed ahead of the 20 digits.•Say the command delete or back to delete or correct the corresponding
block of digits.•Say repeat to have all the digits that have been recognised up to that
point repeated.•If two or more names sound alike, it is better to save the names including
the first name or some other distinguishing entry.•A running dialogue can be cancelled at any time by pressing the talk
button .•The telephone book works only in conjunction with the hands-free speech
control system; the entries are not stored on the phone's SIM card.
Speech command
Condition
Message
Action
STORE NAME
Telephone book
is not full
please?>
Dialogue
COMPANY XYZ
the name>
Dialogue
COMPANY XYZ
please?>
Dialogue
ZERO, ONE, TWO,
THREE
three>
Dialogue
FOUR, FIVE, SIX

Dialogue
If no command is specified, the system responds after about 5 seconds
with the next cue.
No command
mands are: Store,
repeat, back,
delete, or you can
specify addi-
tional digits>
Dialogue
STORE
saved.>
Dialogue - The
name COMPANY
XYZ with the tele-
phone number
0123456 will be
storedEnd of dialogue
AC
AC
Sist Comunicacion_EN.book Seite 26 Mittwoch, 15. Juli 2009 6:45 18

Communication27
Controls and equipment
Calling a name in the phone book– Press the talk button .
– After the tone, say the command SELECT NAMEAfter the system has recognised this command, you may select a stored entry
from the telephone book to call the required number. The system best recog-
nises names spoken by the person who stored the name.
Example for selecting a name from the internal telephone book
A running dialogue can be cancelled at any time by pressing the talk button
⇒ page 20, fig. 10 .
Listening to the phone book
You can have the entries stored in the internal telephone book
read out to you.– Press the talk button ⇒page 20, fig. 10 . The beep tone indi-
cates that the system is ready.
–Say the command PLAY PHONE BOOK.After giving the command the system will read out the entries stored in the
phone book. If you press the talk button as an entry is being read, the
system will call the telephone number for that entry. Once the dialogue is
complete and the system is reactivated, you can also select an entry to call by
specifying the stored name.
Example for the PLAY PHONE BOOK command:
Speech command
Condition
Message
Action
SELECT NAME
Phone is
switched on, tele-
phone book con-
tains entries.
please?>
Dialogue
COMPANY XYZ

Dialogue
If no command is specified, the system responds after about 5 seconds
with the next cue.No command
mands are: dial,
repeat, back>
Dialogue
DIAL
being dialled.>
Dialogue - The
telephone
number for Com-
pany XYZ is being
dialledEnd of dialogue
AC
AC
Speech command
Condition
Message
Action
PLAY PHONE
BOOK
The telephone
book contains
entries.
The telephone
book will then be
read out.End of dialogue
AC
AC
Sist Comunicacion_EN.book Seite 27 Mittwoch, 15. Juli 2009 6:45 18