2009 Seat Exeo ST air condition

SEAT maintenance programme7
SEAT maintenance programmeGeneral informationThis maintenance programme will inform you of the work to carry out regularly
on your vehicle in order to ensure the safety, reliability and durability
required.
Using the “vehicle identification” data or the data contained in this docu-
ment, the correct spare parts your vehicle could require in case of repairs are
specified, even after many years from the initial purchase.
We recommend that you keep this maintenance programme with the vehicle
documents. The inspection receipts are one of the essential requirements for
exercising your rights under warranty.
The maintenance programme shows the date of delivery, and this indicates
the starting date of the vehicle warranty.Concepts of the SEAT serviceLongLife Services or inspection services by time or mileage?Depending on the technical characteristics of the vehicle, the LongLife
Service or the inspection service is selected. If the LongLife Service is not
desired, the inspection service can be selected.
Your authorised SEAT Service Centre is able to advise on the service mode
suited to your vehicle and will provide information of whether there is any
work required by law to be carried out on the vehicle. Each Inspection Ser vice, as well as any additional operation required already
has a pre-established work time. This will allow you to know the total cost of
the service beforehand.
The authorised SEAT Service Centre network is equipped with modern work-
shop technology and well-trained specialists. Many SEAT Service Centres
offer different service packages at special prices
Important information relating to the service concept is given on the
following pages.
The information described here is correct at the time of going to print. Modi-
fications may be necessary for technical reasons
Note
The cost of the SEAT inspection service may vary, depending on the vehicle
type, equipment fitted, additional work and statutory tests. Your authorised
SEAT Service Centre can advise you of the costs.Adverse conditionsThe Service Centre “service advisor” will inform you of any necessary addi-
tional work within the intervals defined by the Inspection Service, according
to the conditions and environment in which the vehicle is used. For example,
an oil change where the vehicle is used only for frequent short journeys or is
subject to extreme temperatures. Likewise, when the vehicle is used in dusty
conditions, dust and pollen filter cartridges must be changed more often and
the timing belt must be checked.
PM Exeo_EN Seite 7 Montag, 31. August 2009 3:46 15

SEAT maintenance programme
10
Note•We recommend that you visit an Authorised SEAT Service Centre whenever
you require any work done on your vehicle.•SEAT regularly communicates to its Authorised Service Centres new
product developments. They have tools and highly specialized personnel
who can guarantee the safety and performance of your vehicle.•Scrupulously following the General Programme for Inspection Services in
Authorised SEAT Service Centres will ensure you maintain greater value for
your vehicle.SEAT oil change serviceThis includes the following:•Engine oil changed, oil filter replaced.•Brake pad thickness checked.•Service interval display reset.SEAT inspectionAn inspection is required every 30,000 km (20,000 miles) or 2 months,
whichever comes first.
Inspection Service every 30,000 km (20,000 miles) or 2 yearsOperations to be performed on your vehicle:•Battery: Check condition•Self-diagnosis: Check fault memory in all systems.•Service interval indicator: Reset to zero.•Sunroof: Check operation, clean guttering and lubricate guides.•Windscreen wiper and headlight wiper system: Check operation and look
for possible damage, fill if necessary.•Tyres (including the spare wheel): Check surface, tread and tyre pressure.•Engine oil and oil filter: Replace.•Front and rear brake pads: Check.•Brake system: Check for leaks and damage•Engine and engine compartment components (from below) : Check for
leaks and damage•Steering ball joints: Check fastenings and absence of leaks and damage,
and verify play.•Engine and engine well components (from above): Visual check for leaks
and damage.•Brake fluid level, according to brake pad wear: Check.•Servo steering hydraulic system: Check for leaks and check fluid levels,
topping up with hydraulic oil where necessary.•Test run, brake system, parking brake, gear control, steering system, air
conditioning: Check operation.•“Next service” sticker: Write the date and mileage, and attach it onto the
door frame.
PM Exeo_EN Seite 10 Montag, 31. August 2009 3:46 15

SEAT maintenance programme11
Inspection Service every 60,000 km (40,000 miles) or 4 yearsOperations to be performed on your vehicle:•Battery: Check condition•Front/rear lights, luggage compartment lighting, indicators and hazard
lights: Check operation.•Interior and glove compartment lighting, lighter, warning lights and horn:
Check operation.•Self-diagnosis: Check fault memory in all systems.•Service interval indicator: Reset to zero.•Door and tailgate hinges: Lubricate.•Door arresters, lock cylinders and bonnet arrester hooks: Lubricate•Sunroof: Check operation, clean guttering and lubricate guides.•Windscreen wiper and headlight wiper system: Check operation and look
for possible damage, fill if necessary.•Tyres (including the spare wheel): Check surface, tread and tyre pressure.•Engine oil and oil filter: Replace.•Front and rear brake pads: Check.•Exhaust system : Check fastenings and absence of leaks and damage•Underside protection: Check visually for damage•Brake system: Check for leaks and damage•Engine and engine compartment components (from below) : Visual check
for leaks and damage.•Steering knuckles: Check attachments and check for leaks and damage.
Check for play.
•Engine and engine well components (from above): Visual check for leaks
and damage.•Coolant system : Check coolant and frost protection level.•Brake fluid level, according to brake pad wear: Check.•Servo steering hydraulic system: Check for leaks and check fluid levels,
topping up with hydraulic oil where necessary.•Headlights: Checking their adjustment.•Test run, brake system, parking brake, gear control, steering system, air
conditioning: Check operation.•“Next service” sticker: Write the date and mileage, and attach it onto the
door frame.Additional tasksIn addition to the Inspection Service, additional maintenance jobs may have
to be carried out, depending on the conditions in which your vehicle is used
and on the equipment carried. This additional work should be carried out in
accordance with time/distance travelled to ensure your vehicle remains reli-
able. Your Service Centre will provide detailed information about the addi-
tional work that may be necessary. This can be done independently of the
obligatory services, taking into account the notes on the Maintenance
Programme (or the label: Next service). Your SEAT Service Centre will be
happy to advise you and quote the prices for this additional work. Additional
jobs completed are marked on the workshop sheet with the receipt.
PM Exeo_EN Seite 11 Montag, 31. August 2009 3:46 15

SEAT maintenance programme
12Every 7,500 km (5,000 miles)•Engine oil and oil filter: Replace (only engines using high sulphur content
diesel fuel).Every 30,000 km (20,000 miles) or every 2 years•Dust and pollen filter: Replace.Every 60,000 km (40,000 miles)•Automatic gearbox: Change oil.•Fuel filter: Change (only diesel engines)Every 60,000 km (40,000 miles) or every 4 years•Air filter: Clean casing and replace filt er element (only diesel CR engines).•Spark plugs : Replace (except 2.0 TFSI engines).Every 90,000 km (60,000 miles) or every 6 years•Spark plugs : Replace (only 2.0 TFSI engines).•Air filter: Clean casing and replace filter element (only petrol engines).
At 90,000 km (60,000 miles) the first time, then every 30,000 km (20,000 miles)•Timing belt: Check condition and replace as necessary (only 1.6 MPI
petrol engines up to 180,000 km (120,000 miles)Every 180,000 km (120,000 miles)•Timing belt: Replace (diesel Common Rail engines and petrol engines).Every 180,000 km (120,000 miles) the first time, then every 30,000 km (20,000 miles)•Particulate filters Check (only diesel Common Rail engines).Every 360,000 km (240,000 miles)•Camshaft timing belt tension roller: Replace (TDI Common Rail engines).After 3 years the first time around, then every 2 years•Brake fluid: Replace
PM Exeo_EN Seite 12 Montag, 31. August 2009 3:46 15

Warranty
16WarrantyFault-free operation warrantyAccording to the clauses of the warranty applied to SEAT vehicles in the sales
contract, A fault-free operation warranty of 2 years in accordance with legal
requirements
2) 3) is provided from the date of delivery.
We hope that it is understood that natural wear as well as damage caused by
the abuse of vehicle performance through inappropriate use or by unaccept-
able modifications are excluded from the warranty. The warranty is also
invalid when the vehicle is damaged by the use of parts and accessories that
are not SEAT approved or damage due to ignoring the maintenance and repair
requirements.
Paintwork and body warrantyAuthorised Service Centres provide a warranty on bodywork
and paintwork for vehicles sold in the EU.In addition to the warranty conditions for brand new SEAT vehicles (as
detailed in the purchase contract), a defined period warranty is also provided
covering paintwork and bodywork rusting:•3 year paintwork warranty following delivery date (except the Alhambra
model).
•12 years from the date of delivery against bodywork through-rusting (6
years for the Alhambra).
I f , h o w e v e r, t h i s t y p e o f d a m a g e s h o u l d o cc u r, i t w i l l b e r e p a i r e d f r e e o f ch a r g e
including parts and labour by any SEAT Authorised Service Centre in Europe.
Warranty claims will not be accepted in the following circumstances:•if damage is caused by external influence or carelessness, or•if damage to the body is not repaired promptly and appropriately in
accordance with the manufacturer's instructions using genuine, approved
spare parts and materials, or•if perforation rusting is caused by the use of non-genuine parts and mate-
rials for body repairs and if these repairs were not carried out in accordance
with the manufacturer's instructions.
If the bodywork is repaired or painted, your Authorised Service Centre will
certify your warranty against through-rusting for the repaired sections.Approved SEAT exchange partsThe approved SEAT exchange parts, conforming to the manufacturer’s
requirements, constitute an additional service at your disposal, offering you
the possibility to replace entire assemblies, the most common being: the
lightened engine, gearboxes, cylinder heads, control units, electrical
elements, etc.
Of course these are Approved parts and, as they have the same class as the
manufacturer parts, they share the same SEAT approved spare parts warranty.
2)The warranty is not available for all export markets. For more information, please ask
your Authorised SEAT Service Centre.3)As well as the legally required warranty, SEAT offers an extended warranty to their cli-
ents in some European countries. The specific conditions of this extended warranty
are detailed in the vehicle sales contract.
PM Exeo_EN Seite 16 Montag, 31. August 2009 3:46 15