86D-15V1 MR-413-X44-86D000$060.mif
86D
BIC
Vdiag No.: 14
VP001: "Write VIN"
This command permits manual entry of the vehicle's VIN into the computer. Use this command each time the
computer is replaced. The VIN number is inscribed on the manufacturer's plate.
Procedure for writing the VIN
–Establish dialogue with the computer of the multimedia connection unit
–Select the Repair mode menu.
–Select the Other parameters menu.
–Select line VP001 Write VIN.
–Enter the VIN.
–Exit fault finding mode.
–Switch off the ignition.
–Wait 5 seconds.
–Reread the VIN in the Identification menu for confirmation (ID008 VIN code).
SC002: Vehicle identifier (Only for New Twingo)
This command is used to obtain the vehicle identifier. The SC002 is used to read the "Vehicle ID" entered in the
instrument panel computer and to enter it in the multimedia connection unit and in the display. The vehicle identifier
is contained in this "Vehicle ID".
This command is to be used each time the computer is replaced. The radio will be locked if it does not read a correct
vehicle identifier.
MULTIMEDIA CONNECTION UNIT
Fault finding – Programming
