2009 RENAULT TWINGO RS mirror

Contents
82A ENGINE IMMOBILISER
Immobiliser system: List and
location of components 82A-1
Ignition switch: Removal -
Refitting 82A-3
Transponder ring: Removal -
Refitting 82A-6
Battery for remote door
locking control: Removal -
Refitting 82A-8
82B HORN
Audible warning: Removal -
Refitting 82B-1
83A INSTRUMENT PANEL
Instr ument panel: Removal -
Refitting 83A-1
Rev counter: Removal -
Refitting 83A-3
83D CRUISE CONTROL
Cruise control - speed
limiter: List and location of
components 83D-1
Switch: Removal - Refitting 83D-2
Steering wheel switch:
Removal - Refitting 83D-384A CONTROL - SIGNALS
Steering column switch
assembly: List and location
of components 84A-1
Steering column switch
assembly: Removal -
Refitting 84A-2
Screen wiper switch:
Removal - Refitting 84A-6
Signals and lighting switch:
Removal - Refitting 84A-8
Hazard warning lights and
central door control:
Removal - Refitting 84A-10
Lighting dimmer: Removal -
Refitting 84A-12
Exter ior rear view mirror
control switch: Removal -
Refitting 84A-13
Heated rear screen: Repair 84A-14
85A WIPING - WASHING
Wiping and washing: List and
location of components 85A-1
Windscreen wiper blade:
Removal - Refitting 85A-5
Windscreen wiper arm:
Removal - Refitting 85A-6
Windscreen wiper
mechanism: Removal -
Refitting 85A-10
Windscreen wiper motor:
Removal - Refitting 85A-12
Rear screen wiper blade:
Removal - Refitting 85A-16
Rear screen wiper arm:
Removal - Refitting 85A-17
Rear screen wiper motor :
Removal - Refitting 85A-19
Rain and light sensor:
Removal - Refitting 85A-20

84A-13
CONTROL - SIGNALS
Exterior rear view mirror control switch: Removal - Refitting
DOOR MIRRORS 02 or DOOR MIRRORS 03 or DOOR MIRRORS 04
84A
REMOVAL
I - REMOVAL PREPARATION OPERATION
aRemove the driver's door trim ( (see Front side
door trim: Removal - Refitting) ).
aRemove the electric window control plate from the
front side door trim by pressing the clips (1) .II - OPERATION FOR REMOVAL OF PART
CONCERNED
aRemove the exterior rear view mirror control switch
by pressing on the clips (3) .
REFITTING
I - REFITTING OPERATION FOR PART
CONCERNED
aRefit the exterior rear view mirror control switch on
the electric window plate.
II - FINAL OPERATION.
aRefit:
-the electric window control plate on the front side
door trim,
-the driver's door trim ( (see Front side door trim:
Removal - Refitting) ).
119497
119513
119513

85A-4
WIPING - WASHING
Wiping and washing: List and location of components85A
12 - Rear screen washer jet
13 - Windscreen washer bottle14 - Windscreen washer pump
15 - Rain and light sensor
The rain and light sensor is located under the interior
rear-view mirror covers.
119532
121090121089
101715

85A-20
WIPING - WASHING
Rain and light sensor: Removal - Refitting
LIGHTS + AUTOMATIC WINDSCREEN WIPER
85A
REMOVAL
I - REMOVAL PREPARATION OPERATION
aRemove the covers from the interior rear-view mirror
(see Interior rear-view mirror: Removal - Refit-
ting) (MR 412, 57A, Interior equipment).
II - REMOVAL OPERATION FOR PART
CONCERNED
1 - Replacing the rain sensor
aDisconnect the connector at (1) .
aUnclip the two side clips (2) from the rain and light
sensor using the (Car. 1363),
aRemove the rain and light sensor.2 - Replace the windscreen
aDisconnect the connector at (3) .
aUnclip the two side clips (4) from the rain and light
sensor using the (Car. 1363), Special tooling required
Car. 1363Set of tr im removal levers.
124343
124343

85A-22
WIPING - WASHING
Rain and light sensor: Removal - Refitting
LIGHTS + AUTOMATIC WINDSCREEN WIPER
85A
2 - Replace the windscreen
aApply the adhesive base to the new windscreen.
II - REFITTING OPERATION FOR PART
CONCERNED
1 - Replacing the rain and light sensor
aFit the rain and light sensor.
aClip on the rain and light sensor.
aConnect the rain and light sensor connector.
2 - Replace the windscreen
aClip on:
-the rain and light sensor printed circuit unit onto the
adhesive base,
-the rain and light sensor.
aConnect the rain and light sensor connector.
III - FINAL OPERATION.
aRefit the covers on the interior rear-view mirror (see
Interior rear-view mirror: Removal - Refitting)
(MR 412, 57A, Interior equipment).
124345

86A-5
RADIO
Radio aerial: Removal - Refitting
WITH 2 SPEAKERS, WITHOUT RADIO or WITH 4 SPEAKERS, WITHOUT RADIO or RADIO NO. 01 or RADIO
NO. 03
86A
REMOVAL
I - REMOVAL PREPARATION OPERATION
aRemove:
-the front seat belt upper bolt (see Front seat belt:
Removal - Refitting) (MR 412, 59A, Safety equip-
ment),
-the rear seat belt upper bolt (see Rear seat belt:
Removal - Refitting) (MR 412, 59A, Safety equip-
ment),
-the sun visor (see Sun visor: Removal - Refitting)
(MR 412, 57A, Interior equipment),
-the interior equipment covers (see Interior rear-
view mirror: Removal - Refitting) (MR 412, 57A,
Interior equipment),
-the A-pillar trims (see Windscreen pillar trim: Re-
moval - Refitting) (MR 412, 71A, Body internal
trim),
-the rear parcel shelf side trims (see Rear parcel
shelf side trim: Removal - Refitting) (MR 412,
71A, Body internal trim),
-the rear panel trims (see Rear panel lining: Re-
moval - Refitting) (MR 412, 71A, Body internal
trim),
-the rear quarter panel trims (see Quarter panel
trim: Removal - Refitting) (MR 412, 71A, Body in-
ternal trim),
-the B-pillar upper trims (see B-pillar upper trim:
Removal - Refitting) (MR 412, 71A, Body internal
trim),
-the headlining (see Headlining: Removal - Refit-
ting) (MR 412, 71A, Body internal trim).
aDisconnect the battery (see 80A, Battery, Battery:
Removal - Refitting, page 80A-2) .
aRemove the sunroof “motor - computer” assembly
(see 87D, Electric windows - Sunroof, Sunroof
opening motor: Removal - Refitting, page 87D-7)
.II - OPERATION FOR REMOVAL OF PART
CONCERNED
aDisconnect the radio aerial connector (1) .
aDisconnect the radio aerial connector (2) .
aRemove:
-the radio aerial nut (3) ,
-the radio aerial.
REFITTING
I - REFITTING OPERATION FOR PART
CONCERNED
aRefit:
-the radio aerial, OPENING ROOF
121086
121087

86A-6
RADIO
Radio aerial: Removal - Refitting
WITH 2 SPEAKERS, WITHOUT RADIO or WITH 4 SPEAKERS, WITHOUT RADIO or RADIO NO. 01 or RADIO
NO. 03
86A
-the radio aerial nut.
aConnect the radio aerial connectors.
II - FINAL OPERATION.
aRefit the sunroof “motor - computer” assembly (see
87D, Electric windows - Sunroof, Sunroof ope-
ning motor: Removal - Refitting, page 87D-7) .
aRefit:
-the headlining (see Headlining: Removal - Refit-
ting) (MR 412, 71A, Body internal trim),
-the B-pillar left-hand upper trims (see B-pillar up-
per trim: Removal - Refitting) (MR 412, 71A,
Body internal trim),
-the rear quarter panel trims (see Quarter panel
trim: Removal - Refitting) (MR 412, 71A, Body in-
ternal trim),
-the rear panel trims (see Rear panel lining: Re-
moval - Refitting) (MR 412, 71A, Body internal
trim),
-the rear parcel shelf side trims (see Rear parcel
shelf side trim: Removal - Refitting) (MR 412,
71A, Body internal trim),
-the A-pillar trims (see Windscreen pillar trim: Re-
moval - Refitting) (MR 412, 71A, Body internal
trim),
-the interior equipment covers (see Interior rear-
view mirror: Removal - Refitting) (MR 412, 57A,
Interior equipment),
-the sun visor (see Sun visor: Removal - Refitting)
(MR 412, 57A, Interior equipment),
-the rear seat belt upper bolt (see Rear seat belt:
Removal - Refitting) (MR 412, 59A, Safety equip-
ment),
-the front seat belt upper bolt (see Front seat belt:
Removal - Refitting) (MR 412, 59A, Safety equip-
ment).aConnect the battery (see 80A, Battery, Battery: Re-
moval - Refitting, page 80A-2) .
aCarry out the necessary operations without the dia-
gnostic tool (see Battery: Initialisation) (MR 413,
80A, Battery).
OPENING ROOF
OPENING ROOF

87D-7
ELECTRIC WINDOWS - SUNROOF
Sunroof opening motor: Removal - Refitting
OPENING ROOF
87D
REMOVAL
I - REMOVAL PREPARATION OPERATION
aDisconnect the battery (see 80A, Battery, Battery:
Removal - Refitting, page 80A-2) .
aRemove:
-the upper bolt from the front seat belts (see Front
seat belt: Removal - Refitting) (MR 412, 59A, Sa-
fety equipment),
-the upper bolt from the rear seat belts (see Rear
seat belt: Removal - Refitting) (MR 412, 59A, Sa-
fety equipment),
-the sun visors (see Sun visor: Removal - Refit-
ting) (MR 412, 57A, Interior equipment),
-the interior rear-view mirror covers (see Interior
rear-view mirror: Removal - Refitting) (MR 412,
57A, Interior equipment),
-the A-pillar trims (see Windscreen pillar trim: Re-
moval - Refitting) (MR 412, 71A, Body internal
trim),
-the rear parcel shelf side trim panels (see Rear
parcel shelf side trim: Removal - Refitting) (MR
412, 71A, Body internal trim),
-the rear panel trims (see Rear panel lining: Re-
moval - Refitting) (MR 412, 71A, Body internal
trim),
-the rear quarter panel trims (see Quarter panel
trim: Removal - Refitting) (MR 412, 71A, Body in-
ternal trim),
-the B-pillar upper trims (see B-pillar upper trim:
Removal - Refitting) (MR 412, 71A, Body internal
trim).
-the headlining (see Headlining: Removal - Refit-
ting) (MR 412, 71A, Body internal trim).II - OPERATION FOR REMOVAL OF PART
CONCERNED
aRemove:
-the sunroof computer mounting bolts (1) ,
-the “sunroof computer - computer mounting” as-
sembly (2) .
aDisconnect the supply connector (3) from the sun-
roof motor.
121396