81C-2
MR-413-X44-81C000$200_eng.mif
V1
81C
FUSE BOX
Customer complaints
NO + AFTER IGNITION FEED ON COMPONENT 1016 ALP 1
NO COMPONENT 1016 FUSE F11-20A SUPPLY ALP 2
NO COMPONENT 1016 FUSE F12-5A SUPPLY ALP 3
NO COMPONENT 1016 FUSE F13-30A SUPPLY ALP 4
NO COMPONENT 1016 FUSE F14-20A SUPPLY ALP 5
NO COMPONENT 1016 FUSE F16-20A SUPPLY ALP 6
NO COMPONENT 1016 FUSE F25-5A SUPPLY ALP 7
NO COMPONENT 1016 FUSE F40-5A SUPPLY ALP 8
NO COMPONENT 1016 FUSE F15-5A SUPPLY ALP 9
NO COMPONENT 1016 FUSE F17-30A SUPPLY ALP 10
NO COMPONENT 1016 FUSE F18-10A SUPPLY ALP 11
NO COMPONENT 1016 FUSE F20-15A SUPPLY ALP 12
NO COMPONENT 1016 FUSE F21-20A SUPPLY ALP 13
NO COMPONENT 1016 FUSE F48-15A SUPPLY ALP 14
MR-413-X44-81C000$200_eng.mif
81C-5
MR-413-X44-81C000$400_eng.mif
V1
81C
FUSE BOX
Fault finding chart
ALP 1 No + after ignition feed on component 1016
NOTESCheck fuses F1-30A, F2-15A, F3-15A, F3-15A, F4-7.5A, F5-15A, F6-15A,
F7-15A, F8-15A, F9-15A, F10-5A of component 1016 in addition to fuse MF-60A of
component 597.
During the test the vehicle should be on + after ignition feed.
Use a test light to check for + 12 V between fuse F1-30A of component 1016 and a chassis earth.
Is the test light lit?
NO YES
Test the continuity on connection A between
fuse F1-30A of component 1016 and component 104.Check fuse F1-30A.
Is the continuity correct? Is the fuse correct?
YES NO YES NO
Carry out a continuity test
between connection BP12
and connection A of
component 104.
Is the continuity correct?
YES NO
Use a test light to check for + 12 V between
connection BP12 of component 104 and a chassis
earth.
Is the test light lit?
YES NO
Replace the immobiliser
Fault on connection A.
Repair the wiring. If there
is a repair procedure
(see Technical Note
6015A, Repairing
electrical wiring,
Wiring: Precautions for
repair), repair the wiring,
otherwise replace it.Replace the passenger
compartment fuse box.Replace fuse F1-30A
of component 1016.
Replace the immobiliser.
MR-413-X44-81C000$400_eng.mif
