Chassis
"The repair procedures given by the manufacturer in this document are based on the
technical specifications current when it was prepared.
The procedures may be modified as a result of changes introduced by the
manufacturer in the production of the various component units and accessories from
which his vehicles are constructed."
V1
All rights reserved by Renault s.a.s.
Edition Anglaise
Copying or translating, in part or in full, of this document or use of the service part
reference numbering system is forbidden without the prior written authority of
Renault s.a.s.
© Renault s.a.s.
V1 MR-413-X44-38C000$000_engTOC.mif
ANTI-LOCK BRAKING SYSTEM
MK70 ABS
Vdiag No: 04
Fault finding - Introduction 38C - 2
Fault finding - List and location of components 38C - 7
Fault finding - Operating diagram 38C - 8
Fault finding - Function 38C - 9
Fault finding - Role of components 38C - 10
Fault finding - Defect and safe modes 38C - 11
Diagnostics - Replacing parts 38C - 12
Diagnostics - Configuration and Programming 38C - 13
Fault finding - Fault summary table 38C - 14
Fault finding - Interpretation of faults 38C - 15
Fault finding - Conformity check 38C - 51
Diagnostic - Summary table of statuses and parameters 38C - 52
Fault finding - Interpretation of statuses 38C - 53
Fault finding - Dealing with command modes 38C - 57
Fault finding - Command summary table 38C - 58
Fault finding - Dealing with command modes 38C - 59
Fault finding - Customer complaints 38C - 64
Fault finding - Fault Finding Chart 38C - 65
38C
MR-413-X44-38C000$000_engTOC.mif
38C-11
MR-413-X44-38C000$282_eng.mif
V1
38C
ANTI-LOCK BRAKING SYSTEM
Fault finding - Defect and safe modes
Fault finding warning lights programming
Instrument panel warning lightInstrument panel
messageMeaning
Brake faultsABS system STOPNo computer.
ABS flashing
at 8 Hz
(quickly)Tachometric index not
programmed.
ABS flashing
at 8 Hz
(quickly)SERVICETachometric index not
programmed and
versions not
programmed.
Brake faults
flashing at
2 HzABS flashing
at 2 Hz
(slowly)No messageABS computer is in fault
finding mode.
ABS system SERVICE Check the ABS ABS fault.
Brake faultsABS system SERVICE STOP Braking system fault EBD fault.
Note:
The STOP warning light is always accompanied by a single audible warning (1 beep).
MK70 ABS
Vdiag No: 04
MR-413-X44-38C000$282_eng.mif
