16A-12V2 MR-413-X44-16A000$750.mif
STARTING-CHARGING
Fault finding – Fault finding charts16A
New Twingo
ALP2 The starter turns but does not engage
NOTESSpecial notes:
Disconnect the battery earth before handling.
Remove the starter (see MR 411 Mechanical, 16A, Starter: Removal - Refitting).
Check that the ring gear of the flywheel is in good condition.
Are the ring gear teeth damaged?
Replace the flywheel (see MR 411, Mechanical, 10A,
Flywheel: Removal - Refitting).
Check the condition of the starter (broken teeth or
worn gears).
Is the starter in good condition?
Replace the starter (see MR 411
Mechanical, 16A, Starter: Removal -
Refitting).
Refit the starter (see MR 411 Mechanical, 16A,
Starter: Removal - Refitting).
YESNO
NO
YES
16A-14V2 MR-413-X44-16A000$750.mif
STARTING-CHARGING
Fault finding – Fault finding charts16A
New Twingo
ALP3
CONTINUED
Fit a centring pin, or replace the
flywheel (see MR 411,
Mechanical, 10A, Flywheel:
Removal - Refitting), or replace
the starter (see MR 411, 16A,
Starter: Removal - Refitting).Starter control fault, check the entire
starter control line (see ALP1
continued 3 "C").
Replace the starter (see MR 411, 16A Starter:
Removal - Refitting).
Make several attempts, waiting for 5 minutes
after 5 attempts (let the starter cool). If the result
is still the same after several attempts, replace
the starter (see MR 411, 16A, Starter:
Removal – Refitting).
A
YES
B
NO
C
YES
D
NO
