87B-2
MR-413-X44-87B000$048.mif
V5
87B
PASSENGER COMPARTMENT CONNECTION UNIT
Fault finding - Introduction
1. SCOPE OF THIS DOCUMENT
This document presents the fault finding procedure applicable to all computers with the following specifications:
2. PREREQUISITES FOR FAULT FINDING
Documentation type
Fault finding procedures (this manual):
–Assisted fault finding (integrated into the diagnostic tool),
–Dialogys.
Wiring Diagrams:
–Visu-Schéma (CD-ROM), paper.
Type of diagnostic tools
–CLIP
Special tooling required
3. REMINDER
To run fault finding on the vehicle computers, switch on the ignition.
To cut off the + after ignition feed, proceed as follows:Vehicle(s): New Twingo
Function concerned: Passenger compartment
connection unitName of computer: UCH
Vdiag No.: 44
Special tooling required
Multimeter
Elé. 1681 Universal bornier
–Switch on the ignition with the key.
–Connect the diagnostic tool and perform the required operations.
–Switch off the ignition with the key.
–Disconnect the diagnostic tool.
–Switch off the ignition.
UCH_V44_PRELI
MR-413-X44-87B000$048.mif
UCH
Vdiag No.: 44
