2009 RENAULT TWINGO Electrical Equipment - Multimedia Connection Workshop Manual

86C-17V1 MR-413-X44-86C000$040.mif
MULTIMEDIA CONNECTION
Fault finding – Operating diagram86C
CBOX
Vdiag No.: 04
Clio III
16
15
14
13
12
11
107 9 8
45 4 3
2
4
6
1CAN M CAN V

86C-18V1 MR-413-X44-86C000$050.mif
86C
CBOX
Vdiag No.: 04
The mobile connectivity computer enables music files to be played (MP3, WMA, etc.) on:
•USB mobile peripherals (USB key, MP3 player, etc.) (Except hard disk with own power supply),
•audio peripherals via the jack socket.
The multimedia system offers the following possibilities:
•Choose FM radio stations using the presets, the list or manual selection.
•Have access to an automatically updated FM radio list.
•Listen to CDs and MP3s.
•Control the radio using the radio control satellite.
•Have access to optimised audio and acoustic telephone configurations for each vehicle according to the vehicle
type.
•Modify various acoustic parameters (base, treble, front/rear balance, etc.).
•Use the hands-free telephone function (sound relayed towards the radio speakers) with a Bluetooth telephone.
•Use voice recognition for the telephone functions (button on the radio control satellite). The voice identifier can be
recorded.
•Benefit from a connection for a CD changer.
•Possibility of connecting a peripheral with a USB port, Jack socket, etc.
•Has anti-theft protection
Computer activation system
The mobile connectivity computer has an activation system.
The mobile connectivity computer is activated under the following conditions:
•by pressing the radio ON/OFF button,
•by starting the engine.
The mobile connectivity computer is switched off under the following conditions:
•The ignition is switched off.
•Door opened (Clio III)
•Door opened for 1 minute (New Twingo)
•By pressing the radio ON/OFF button (Clio III and New Twingo).
The multimedia connection unit (Display or Multimedia connection unit ) is activated by the UCH (central door
unlocking); this then activates the multimedia computers (Navigation, Radio, mobile connectivity computer, etc.) via
the "Activation signal" connections.
MULTIMEDIA CONNECTION
Fault finding – Function

86C-19V1 MR-413-X44-86C000$060.mif
86C
CBOX
Vdiag No.: 04
CF001: System configuration
This command is used to configure the computer according to the vehicle equipment.
MULTIMEDIA CONNECTION
Fault finding – Configuration

86C-20V1 MR-413-X44-86C000$070.mif
86C
CBOX
Vdiag No.: 04
VP003: Write V.I.N
This command permits manual entry of the vehicle's VIN into the computer. Use this command each time
the computer is replaced. The VIN number is inscribed on the manufacturer's plate.
Procedure for writing the VIN
•Establish dialogue with the navigation computer.
•Select the Repair mode menu.
•Select the Other configuration menu.
•Select line VP003 Write VIN.
•Enter the VIN.
•Exit fault finding mode.
•Switch off the ignition.
•Wait for the end of the Powerlatch* phase (20 minutes maximum).
•Reread the VIN in the Identification menu to confirm ID008 VIN code.
VP001: Enter last After-Sales operation date
This command is used to enter the date of the last After-Sales operation on the radio.
Consecutively enter the six figures of the date: two for the year, two for the month and two for the day.
E.g. 000706 (06 July 2000).
Reread the date of the last After-sales operation in the Identification menu to confirm ID012 Last After-Sales
operation date.
*Powerlatch: Time required for injection computer supply after + 12 V after ignition feed cut-off.
MULTIMEDIA CONNECTION
Fault finding – Programming

86C-21V1 MR-413-X44-86C000$080.mif
86C
CBOX
Vdiag No.: 04
Tool faultAssociated DTCDiagnostic tool title
DF0019341Computer configuration
DF0029343Computer
DF0039344Computer
DF004 93F0Battery voltage
DF005935DUSB controller
DF0069332Digital terminal connection
DF00793D9USB function
DF008932AUSB supply
MULTIMEDIA CONNECTION
Fault finding – Fault summary table

86C-22
AFTER REPAIRCarry out another fault finding check on the system.
Clear the stored faults using command RZ001 Fault memory.
Deal with any other faults.
V1 MR-413-X44-86C000$090.mif
86C
CBOX
Vdiag No.: 04
DF001
PRESENT
OR
STOREDCOMPUTER CONFIGURATION
1.DEF: Blank or incomplete configuration
NOTESCheck whether the system is correctly configured (see Configuration and
Programming).
Check the system configuration in relation to the vehicle equipment (see Configuration and Programming).
If the fault persists, contact your Techline.
CBOX_V04_DF001
MULTIMEDIA CONNECTION
Fault finding – Interpretation of faults

86C-23
AFTER REPAIRCarry out another fault finding check on the system.
Clear the stored faults using command RZ001 Fault memory.
Deal with any other faults.
V1 MR-413-X44-86C000$090.mif
MULTIMEDIA CONNECTION
Fault finding – Interpretation of faults86C
CBOX
Vdiag No.: 04
DF002
PRESENT
OR
STOREDCOMPUTER
1.DEF: Internal electronic fault
NOTESNone.
Replace the mobile connectivity computer (see MR 392 (Clio III) or MR 411 (New Twingo) 86A, Radio, Offset
multimedia socket computer: Removal – Refitting).
If the fault persists, contact your Techline.
CBOX_V04_DF002

86C-24
AFTER REPAIRCarry out another fault finding check on the system.
Clear the stored faults using command RZ001 Fault memory.
Deal with any other faults.
V1 MR-413-X44-86C000$090.mif
MULTIMEDIA CONNECTION
Fault finding – Interpretation of faults86C
CBOX
Vdiag No.: 04
DF003
PRESENT
OR
STOREDCOMPUTER
1.DEF: Internal electronic fault
NOTESNone.
Replace the mobile connectivity computer (see MR 392 (Clio III) or MR 411 (New Twingo) 86A, Radio, Offset
multimedia socket computer: Removal – Refitting).
If the fault persists, contact your Techline.
CBOX_V04_DF003