82D-2
MR-413-X44-82D000$100_eng.mif
V1
82D
ACCESS/SAFETY
Fault finding - Introduction
1. SCOPE OF THIS DOCUMENT
This document presents the fault finding procedure applicable to all computers with the following specifications:
2. PREREQUISITES FOR FAULT FINDING
Documentation type
Fault finding procedures (this manual):
–Assisted fault finding (integrated into the diagnostic tool), Dialogys.
Wiring Diagrams:
–Visu-Schéma (CD-ROM), paper.
Type of diagnostic tools
–CLIP
Special tooling required
3. REMINDERS
To run fault finding on the vehicle's computers, switch on the ignition in fault finding mode (+ after ignition feed).Vehicle(s): New TWINGO
Function concerned: Access/Safety
Special tooling required
Multimeter
Elé. 1681 Universal bornier
MR-413-X44-82D000$100_eng.mif
