38C-9
ANTI-LOCK BRAKING SYSTEM
Hydraulic brake unit: Removal - Refitting
D4F, and 780, and LEFT-HAND DRIVE – K4M, and LEFT-HAND DRIVE
38C
aDrain the refrigerant circuit using a refrigerant
charging station (see Refrigerant circuit: Drain-
ing - Filling) (62A, Air conditioning).
aRemove the "dehydrator reservoir - expansion
valve" connecting pipe (see Dehydrator reservoir -
expansion valve connecting pipe: Removal - Re-
fitting) (62A, Air conditioning).
II - OPERATION FOR REMOVAL OF PART
CONCERNED
aDisconnect the hydraulic unit computer connector
(5) .
aUndo the rigid brake pipe unions (6) on the hydraulic
unit.
aInsert the blanking plugs.aUnclip the fuel pipes (7) .
aRemove the bolts (8) from the hydraulic unit main
bracket.
aRemove the rear suspended engine mounting (see
Lower engine tie-bar: Removal - Refitting) (19D,
Engine mounting).
aFit theunder the engine.
aRemove the right-hand suspended engine mounting
(see Right-hand suspended engine mounting:
Removal - Refitting) (19D, Engine mounting).
aTilt the engine towards the front of the vehicle.
aRemove the "hydraulic unit bracket - hydraulic unit"
assembly from the body. K4M, and AIR CONDITIONING or CLIMATE CON-
TROL
122386
WARNING
Prepare for the flow of fluid, and protect the sur-
rounding components.
122385
K4M
