2009 Peugeot 607 Dag change time
[x] Cancel search: change timePage 19 of 182
1
22
Manual test of the vehicle Entering CHECK mode
indicator light
This comes on following
pressing of the "CHECK"
button.
Exiting CHECK mode
indicator light
This comes on at the end of
the CHECK mode. With the engine running and the vehicle moving, the instrument panel display temporarily shows:
- warning lights, when a fault occurs,
- v e h i c l e f u n c t i o n s t a t u s i n d i c a t o r
lights, when a change occurs.
The display of certain warning lights
may be accompanied by an audible
signal and a message on the multi-
function display.
Press the "CHECK" button on the
instrument panel.
Y o u c a n s t a r t a t e s t o f t h e v e h i c l e m a n -
ually, at any time, with the ignition on,
e n g i n e r u n n i n g o r v e h i c l e m o v i n g .
This enables you to know:
- the warnings present,
- the status of the functions which can b e a c t i v a t e d o r d e a c t i v a t e d ( a u t o -
matic wipers, automatic switching
on of the lights, ESP, ...).
The associated warning lights are
displayed in succession on the instru-
ment panel display.
If a warning or a change of status oc-
curs during the CHECK mode, the
corresponding warning light(s) are
displayed during this mode and the
CHECK will cease .
Page 36 of 182
2
36
DT COLOUR AND MAP
SCREEN
This displays the following informa-
tion, via the PC Com control pad:
- the time,
- the date,
- the exterior temperature (the value d i s p l a y e d fl a s h e s i f t h e r e i s a r i s k
of ice),
- t h e a c c e s s e s c h e c k ,
- the vehicle functions warning or status messages, displayed tem-
porarily,
- the audio sources displays,
- the telematic systems displays (telephone, services, ...),
- the trip computer displays,
- t h e c o n fi g u r a t i o n d i s p l a y s ,
- the satellite navigation system dis- plays. Management of the displays
The
"AUDIO" , "NAV" , "TRIP" and
"TEL" buttons on the PC Com control
pad permit displaying in the main win-
dow. E x a m p l e : " C o n fi g u r a t i o n "
" C o n fi g u r a t i o n " m e n u
The brightness of the display
and of the instrument panel
may change when the lights
are switched on automatically.
G e n e r a l m e n u
Press the
"MENU" button to gain
access to the g e n e r a l m e n u and
select one of the following functions:
- "Navigation-Guidance",
- "Audio functions",
- "Trip computer",
- " C o n fi g u r a t i o n " ,
- "Directory",
- "Telematics",
- "Map",
- "Video". This provides access to successive
c o n fi r m a t i o n w i n d o w s .
Example: "TRIP"
Page 78 of 182
5
69
The timed duration must
also be set, via the multi-
function display "Person-
alisation-Configuration"
menu. Automatic switching on of the lights
Side lights and dipped beam head-
lamps switch on automatically if the
light is poor, or during operation of the
windscreen wipers. They switch off
as soon as the light becomes bright
enough or the windscreen wipers
stop.
In foggy weather or in snow, the bright-
n e s s s e n s o r c a n d e t e c t s u f fi c i e n t l i g h t .
Therefore, the lights will not come on
automatically. If necessary, you must
switch on the dipped headlamps man-
ually.
This function is active when the vehicle is
supplied to the customer.
To switch the function on
or off, use the multifunction
display "Personalisation-
C o n fi g u r a t i o n " menu.
Activation Deactivation.
When this function is activat-
ed, the indicator light on the
instrument panel comes on. When the function is deacti-
vated, the indicator light on the
instrument panel comes on.
Cancellation:
fl a s h t h e h e a d l a m p s ,
get out of the vehicle and lock it.
Manual "follow-me-home" lighting
In the absence of the automatic switching
on of the lights, the manual "follow-me-
home" lighting can be activated.
When you leave your vehicle, the side
lights and dipped headlamps remain
on for approximately 1 minute.
Activation:
switch off the engine,
fl a s h t h e h e a d l a m p s ,
get out of the vehicle and lock it.
Deactivation:
fl a s h t h e h e a d l a m p s a g a i n ,
get out of the vehicle and lock it.
If the brightness sensor does not func-
tion correctly , the system activates the
function and the lights come on.
Contact a PEUGEOT dealer to have
the system checked.
Daytime running lamps *
On vehicles which are equipped with day-
time running lamps, the dipped headlamps
come on when the vehicle is started.
This indicator lamp comes on on
the instrument panel screen.
The instruments and controls
(instrument panel, multifunc-
tion screen, air conditioning
control panel...) are only lit
on switching to the automatic lighting
mode or when the lights are switched
on manually.
* According to country.
The brightness of the display
and of the instrument panel
may change when the lights
are switched on automatically.
If your lights have been
switched on manually, turn the
ring back to position
0 , lights
off.
Page 79 of 182
5
69
The timed duration must
also be set, via the multi-
function display "Person-
alisation-Configuration"
menu. Automatic switching on of the lights
Side lights and dipped beam head-
lamps switch on automatically if the
light is poor, or during operation of the
windscreen wipers. They switch off
as soon as the light becomes bright
enough or the windscreen wipers
stop.
In foggy weather or in snow, the bright-
n e s s s e n s o r c a n d e t e c t s u f fi c i e n t l i g h t .
Therefore, the lights will not come on
automatically. If necessary, you must
switch on the dipped headlamps man-
ually.
This function is active when the vehicle is
supplied to the customer.
To switch the function on
or off, use the multifunction
display "Personalisation-
C o n fi g u r a t i o n " menu.
Activation Deactivation.
When this function is activat-
ed, the indicator light on the
instrument panel comes on. When the function is deacti-
vated, the indicator light on the
instrument panel comes on.
Cancellation:
fl a s h t h e h e a d l a m p s ,
get out of the vehicle and lock it.
Manual "follow-me-home" lighting
In the absence of the automatic switching
on of the lights, the manual "follow-me-
home" lighting can be activated.
When you leave your vehicle, the side
lights and dipped headlamps remain
on for approximately 1 minute.
Activation:
switch off the engine,
fl a s h t h e h e a d l a m p s ,
get out of the vehicle and lock it.
Deactivation:
fl a s h t h e h e a d l a m p s a g a i n ,
get out of the vehicle and lock it.
If the brightness sensor does not func-
tion correctly , the system activates the
function and the lights come on.
Contact a PEUGEOT dealer to have
the system checked.
Daytime running lamps *
On vehicles which are equipped with day-
time running lamps, the dipped headlamps
come on when the vehicle is started.
This indicator lamp comes on on
the instrument panel screen.
The instruments and controls
(instrument panel, multifunc-
tion screen, air conditioning
control panel...) are only lit
on switching to the automatic lighting
mode or when the lights are switched
on manually.
* According to country.
The brightness of the display
and of the instrument panel
may change when the lights
are switched on automatically.
If your lights have been
switched on manually, turn the
ring back to position
0 , lights
off.
Page 102 of 182
8
87
With the ignition off, if the lever
is not in position P , an audible
signal is heard when the dri-
ver's door is opened. Move
the lever to position P . The audible si-
gnal ceases.
When maintenance operations need
to be carried out with the engine run-
ning, apply the handbrake and select
position P .
When the engine is cold, the operation
of the gearbox may differ from its ope-
ration when the engine is warm.
It is only possible to change
from one gear to another if
the vehicle speed and engine
speed permit. If they do not,
the vehicle will operate temporarily in
automatic mode.
When the vehicle is stationary or
moving very slowly, the gearbox auto-
matically selects gear M1 .
Program S (Sport) does not operate in
manual gear selection mode. Operation with manual selection of the gears
select position M in the gate,
push the lever to the + sign to
change up a gear and push again
to change up another gear,
pull the lever to the - sign to chan-
ge down a gear and pull again to
change down another gear.
You can change from position D (dri-
ving in automatic mode) to position M
(driving in manual mode) at any time.
The Drive program
Select position D in the gate: the
gearbox operates in automatic
mode.
The gearbox automatically adapts the
g e a r i n r e l a t i o n t o t h e p r o fi l e o f t h e
road and the vehicle load.
To obtain maximum acceleration wi-
thout touching the lever (kick down),
press the accelerator down fully to the
end of its travel (passing the point of
resistance). The program will change
down automatically or will stay in
the gear selected until the maximum
engine speed is reached.
The program selected is displayed on
the instrument panel screen.
Press button S once the vehicle
has been started in position D , this
program favours dynamic driving.
You can deactivate the Sport program
at any time by pressing the button
selected. Never select position
N when
the vehicle is moving.
Never select positions P or R
unless the vehicle is stationary.
When the ignition is on with the engine
off, always select position P or N .
When travelling downhill, the program
will change down automatically in or-
d e r t o o f f e r e f fi c i e n t e n g i n e b r a k i n g
and good resumption of acceleration.
When travelling uphill, following rapid
releasing of the pedal, the gearbox
maintains the gear engaged to make
acceleration easier.
Page 103 of 182
8
88
Operating check
The gearbox may be dama-
ged if you: - press the accelerator and brake pedals at the same
time,
- force the lever from position P to
another position when the battery
i s fl a t .
ELECTRONICALLY
CONTROLLED SUSPENSION
Press switch 1 , the in-
dicator light and the
SPORT indicator light will
come on.
In this position, the suspension is
maintained in the SPORT position,
the shock absorption and the steering
a s s i s t a n c e b e c o m e fi r m e r .
Selecting the SPORT position
Press switch 1 again. The
indicator light will go out
and the AUTO indicator
light comes on, accompa-
nied by an audible signal.
Return to automatic operation
I f t h e s w i t c h l i g h t fl a s h e s o r i f
the indicator light comes on,
accompanied by an audible
signal and a message, contact
a PEUGEOT dealer.
Operating check
T h i s i s c o n fi r m e d b y t h e s w i t c h l i g h t
and the indicator lights. The switch li-
ght comes on for approximately three
seconds every time the ignition is swit-
ched on.
Any operating abnormality is
indicated by lighting of this
warning light, accompanied
by an audible signal and a
message on the multifunc-
tion display.
In this situation the gearbox opera-
tes in downgrade mode (locked in
3rd gear). You may feel a substantial
knock when changing from P to R and
from N to R (this will not cause any da-
mage to the gearbox).
Do not exceed 60 mph (100 km/h) or
keep within local speed limits.
Consult a PEUGEOT dealer.
The suspension adapts automatically
and instantly to different driving styles
and road characteristics, improving
the comfort of the occupants and the
vehicle's road holding capabilities.
The suspension favours a smooth
shock absorption, ensuring a comfor-
table ride, but as soon as conditions
demand a change (sporty driving, ti-
ght bends, avoidance action, etc.), it
a u t o m a t i c a l l y s e l e c t s fi r m e r s h o c k a b -
sorption, guaranteeing optimum road
holding.
When the ignition is switched on, the
electronic suspension is always active
in automatic operation mode.
Page 104 of 182
8
88
Operating check
The gearbox may be dama-
ged if you: - press the accelerator and brake pedals at the same
time,
- force the lever from position P to
another position when the battery
i s fl a t .
ELECTRONICALLY
CONTROLLED SUSPENSION
Press switch 1 , the in-
dicator light and the
SPORT indicator light will
come on.
In this position, the suspension is
maintained in the SPORT position,
the shock absorption and the steering
a s s i s t a n c e b e c o m e fi r m e r .
Selecting the SPORT position
Press switch 1 again. The
indicator light will go out
and the AUTO indicator
light comes on, accompa-
nied by an audible signal.
Return to automatic operation
I f t h e s w i t c h l i g h t fl a s h e s o r i f
the indicator light comes on,
accompanied by an audible
signal and a message, contact
a PEUGEOT dealer.
Operating check
T h i s i s c o n fi r m e d b y t h e s w i t c h l i g h t
and the indicator lights. The switch li-
ght comes on for approximately three
seconds every time the ignition is swit-
ched on.
Any operating abnormality is
indicated by lighting of this
warning light, accompanied
by an audible signal and a
message on the multifunc-
tion display.
In this situation the gearbox opera-
tes in downgrade mode (locked in
3rd gear). You may feel a substantial
knock when changing from P to R and
from N to R (this will not cause any da-
mage to the gearbox).
Do not exceed 60 mph (100 km/h) or
keep within local speed limits.
Consult a PEUGEOT dealer.
The suspension adapts automatically
and instantly to different driving styles
and road characteristics, improving
the comfort of the occupants and the
vehicle's road holding capabilities.
The suspension favours a smooth
shock absorption, ensuring a comfor-
table ride, but as soon as conditions
demand a change (sporty driving, ti-
ght bends, avoidance action, etc.), it
a u t o m a t i c a l l y s e l e c t s fi r m e r s h o c k a b -
sorption, guaranteeing optimum road
holding.
When the ignition is switched on, the
electronic suspension is always active
in automatic operation mode.