2009 Peugeot 607 Dag buttons
[x] Cancel search: buttonsPage 16 of 182
1
19
DIESEL MANUAL AND AUTOMATIC GEARBOXES
INSTRUMENT PANEL
1. Engine oil temperature indicator.
2. H a n d b r a k e , l o w b r a k e fl u i d l e v e l a n d
electronic brake force distribution
warning light.
3. Seat belt not fastened/unfastened
warning light.
4. Dipped headlamps indicator light.
5. Main beam headlamps indicator
light.
6. Lighting rheostat buttons.
7. R e v c o u n t e r .
8. Anti-lock braking system (ABS)
warning light.
9. Diesel engine pre-heating warning
light.
10. Emission control system warning
light.
11. Left direction indicator.
12. L o w f u e l l e v e l w a r n i n g l i g h t .
13. Fuel gauge.
14. Functions display screen:
- Check.
- E n g i n e o i l l e v e l g a u g e .
- Warning and status indicator lights.
- Cruise control/speed limiter.
- Automatic gearbox.
- Trip computer.
- S a t e l l i t e n a v i g a t i o n s y s t e m .
15. Right direction indicator.
16. Speedometer.
17. S e r v i c e i n d i c a t o r , t o t a l a n d t r i p
distance recorders.
18. Trip distance recorder zero reset
button.
19. Manual check button.
20. Rear fog lamps indicator light.
21. Front fog lamps indicator light.
22.
Passenger air bag disarmed warning light *
23. Coolant temperature indicator.
* According to country.
Page 36 of 182
2
36
DT COLOUR AND MAP
SCREEN
This displays the following informa-
tion, via the PC Com control pad:
- the time,
- the date,
- the exterior temperature (the value d i s p l a y e d fl a s h e s i f t h e r e i s a r i s k
of ice),
- t h e a c c e s s e s c h e c k ,
- the vehicle functions warning or status messages, displayed tem-
porarily,
- the audio sources displays,
- the telematic systems displays (telephone, services, ...),
- the trip computer displays,
- t h e c o n fi g u r a t i o n d i s p l a y s ,
- the satellite navigation system dis- plays. Management of the displays
The
"AUDIO" , "NAV" , "TRIP" and
"TEL" buttons on the PC Com control
pad permit displaying in the main win-
dow. E x a m p l e : " C o n fi g u r a t i o n "
" C o n fi g u r a t i o n " m e n u
The brightness of the display
and of the instrument panel
may change when the lights
are switched on automatically.
G e n e r a l m e n u
Press the
"MENU" button to gain
access to the g e n e r a l m e n u and
select one of the following functions:
- "Navigation-Guidance",
- "Audio functions",
- "Trip computer",
- " C o n fi g u r a t i o n " ,
- "Directory",
- "Telematics",
- "Map",
- "Video". This provides access to successive
c o n fi r m a t i o n w i n d o w s .
Example: "TRIP"
Page 42 of 182
3
42
9 - A u t o m a t i c v i s i b i l i t y p r o g r a m m e
In certain cases, the comfort
programme may not be suf-
fi c i e n t t o d e m i s t o r d e - i c e t h e
windows (humidity, several
passengers, ice).
In this case, select the visibility pro-
gramme and open the side vents in
order to clear the windows quickly.
It controls the air conditioning, air
fl o w a n d i n t a k e a n d d i s t r i b u t e s t h e
ventilation to the windscreen and
side windows.
The symbols "A/C" , "AUTO" and air
fl o w ( f a n ) a r e d i s p l a y e d .
Once the inconvenience has been
eliminated, pressing button 1 or 2 re-
turns the system to the comfort setting.
Press the OFF button.
7 - Adjustment of the driver's air
distribution
8 - Adjustment of the passenger air
distribution
Successive presses of these buttons
e n a b l e y o u t o d i r e c t t h e fl o w o f a i r o n
the driver's side or on the passenger
side alternately towards:
- the windscreen and footwells,
- the footwells,
- the centre vent, side vent and foot- wells,
- the centre vent and side vent,
- the windscreen.
6 - Deactivation of the air
conditioning (OFF)
5 - B l o w e r a n d a i r fl o w
Press buttons "+"
and "-" respectively
to increase or de-
c r e a s e t h e a i r fl o w .
T h e a i r fl o w s y m b o l ( f a n ) i s fi l l e d i n i n
relation to the value required.
To prevent condensation and dete-
rioration of the quality of the air in the
passenger compartment, ensure that
a n a d e q u a t e fl o w o f a i r i s m a i n t a i n e d .
This action switches off the display and
the indicator lights and deactivates all
of the functions of the system, with the
exception of the rear screen demisting.
The temperature-related comfort is no
longer controlled (temperature, humidity,
condensation).
Avoid driving for too long with the air
conditioning deactivated.
Pressing this button again or but-
tons 5 , 7 or 8 or one of the two
"AUTO" buttons reactivates the
system with the values set before
it was switched off.
Page 49 of 182
3
48
Memorising driving and mirror positions
Memorising using the controls on
the driver's door
To memorise:
Place the key in the ignition on po-
sition,
Adjust your seat and mirrors,
Press button M , then button 1 " fi r s t
driving position" or button 2 "sec-
ond driving position" within four
seconds.
A n a u d i b l e s i g n a l c o n fi r m s t h a t a p o s i t i o n
has been memorised.
Memorising a new position cancels
the previous one. Recalling a memorised driving
position
I g n i t i o n o n , v e h i c l e s t a t i o n a r y
B r i e fl y p r e s s b u t t o n 1 or 2 to recall
the corresponding memorised po-
sition. The end of the setting is in-
dicated by a bleep.
After recalling a memorised position
a few times in succession, the func-
tion will be cancelled until the engine
is started.
G - Heated seats adjustment
With the engine running, use the cor-
responding adjustment dial to select
the required degree of heating:
0
: Off.
1
: Low.
2
: Medium.
3
: H i g h . The electrical adjustments of the seat
and exterior mirrors are memorised.
Two driving positions can be memo-
rised using buttons
M/1 and M/2 . Vehicle moving
Keep button 1 or 2 pressed down
until the bleep indicates that set-
ting of the corresponding memo-
rised position is complete.
Page 50 of 182
3
48
Memorising driving and mirror positions
Memorising using the controls on
the driver's door
To memorise:
Place the key in the ignition on po-
sition,
Adjust your seat and mirrors,
Press button M , then button 1 " fi r s t
driving position" or button 2 "sec-
ond driving position" within four
seconds.
A n a u d i b l e s i g n a l c o n fi r m s t h a t a p o s i t i o n
has been memorised.
Memorising a new position cancels
the previous one. Recalling a memorised driving
position
I g n i t i o n o n , v e h i c l e s t a t i o n a r y
B r i e fl y p r e s s b u t t o n 1 or 2 to recall
the corresponding memorised po-
sition. The end of the setting is in-
dicated by a bleep.
After recalling a memorised position
a few times in succession, the func-
tion will be cancelled until the engine
is started.
G - Heated seats adjustment
With the engine running, use the cor-
responding adjustment dial to select
the required degree of heating:
0
: Off.
1
: Low.
2
: Medium.
3
: H i g h . The electrical adjustments of the seat
and exterior mirrors are memorised.
Two driving positions can be memo-
rised using buttons
M/1 and M/2 . Vehicle moving
Keep button 1 or 2 pressed down
until the bleep indicates that set-
ting of the corresponding memo-
rised position is complete.
Page 108 of 182
8
91
Memorising a speed
A speed can be memorised without
activation of the limiter.
A brief press on buttons 2 and 3 de-
creases or increases by 1 mph (1 km/h).
A maintained press decreases or in-
creases the memorised speed progres-
sively in steps of 5 mph (5 km/h).
Switching the function off
Place switch 1 in position 0 or
CRUISE or switch off the ignition
to switch the system off. The last
speed programmed remains in the
memory. Activation/deactivation of the
limiter
The activation is taken into account,
when the vehicle is moving, when the
vehicle speed is at least 5 mph (5 km/h)
below the stored speed.
Pressing button
4 activates the limiter,
pressing this button again deactivates it.
When the limiter is active, the display
indicates (e.g. at 70 mph (110 km/h)):
Exceeding the programmed speed
In exceptional situations, this method
can be used to exceed the program-
med speed.
Pressing the accelerator to exceed the
programmed speed will have no effect
unless the pedal is pressed fi r m l y to
the end of its travel (passing the point
of resistance ).
The limiter is deactivated temporarily
a n d d i s p l a y s t h e s p e e d w h i c h fl a s h e s
(e.g. at 70 mph (110 km/h)): To re-activate the limiter, release the
accelerator to slow down to a speed
below the programmed speed.
Operating check
In the event of a limiter malfunction,
the memorised speed is erased, the
d a s h e s fl a s h f o r a f e w s e c o n d s :
To prevent the mat from beco-
ming caught under the pedals: - ensure that the mat is po- sitioned correctly,
- n e v e r fi t o n e m a t o n t o p o f a n o t h e r .
Contact a PEUGEOT dealer to have
the system checked.
Selecting the function
Place switch 1 in the LIMIT posi-
tion. The limiter is not yet active.
By default the display indicates:
Note: sometimes (on a steep
descent), the limiter may not
prevent the vehicle from ex-
ceeding the programmed
s p e e d , t h i s s p e e d fl a s h e s .
On a steep descent or if you
accelerate sharply, the speed
limiter, which does not act on
the brakes, will not be able to
prevent the vehicle from exceeding
the programmed speed.
The speed limiter cannot, in any cir-
cumstances, replace the need to com-
ply with speed limits or the need for
vigilance and responsibility on the part
of the driver.