2009 Peugeot 607 Dag ignition
[x] Cancel search: ignitionPage 28 of 182
1
30
INSTRUMENT PANEL DISPLAY
After switching on the ignition, two
functions are shown in succession:
- s e r v i c e i n d i c a t o r ,
- total distance recorder (total and trip distances).
Note: the total and trip distances are dis-
played for 30 seconds when the ignition
i s s w i t c h e d o f f , o n o p e n i n g t h e d r i v e r ' s
door, as well as on locking and unlock-
i n g t h e v e h i c l e .
Engine oil level indicator
When the ignition is switched on, the
e n g i n e o i l l e v e l i s i n d i c a t e d o n t h e
instrument panel display for approxi-
mately 7 seconds.
T h i s l e v e l i s i n d i c a t e d a t t h e s a m e
t i m e a s t h e s e r v i c e i n f o r m a t i o n w h i c h
appears on the display located in the
speedometer dial.
Oil level correct
Lack of oil
Flashing indicates a lack
of oil which may damage
the engine.
If the lack of oil is con-
fi r m e d b y c h e c k i n g u s i n g
t h e d i p s t i c k , i t i s i m p e r a t i v e t h a t t h e
l e v e l i s t o p p e d u p . C h e c k t h e o i l l e v e l u s i n g
the dipstick.
I f t h e l e v e l i s c o r r e c t , t h e
fl a s h i n g i n d i c a t e s a n e n -
g i n e o i l l e v e l g a u g e m a l -
function.
Consult a PEUGEOT dealer.
T h e l e v e l o b s e r v e d o n t h e d i p s t i c k i s
o n l y v a l i d i f t h e v e h i c l e i s p a r k e d o n
l e v e l g r o u n d a n d t h e e n g i n e h a s b e e n
off for more than 15 minutes.
Dipstick
T h e r e a r e 2 l e v e l m a r k s o n t h e
dipstick:
- n e v e r e x c e e d l e v e l A ,
- i n p o s i t i o n B , t o p u p t h e l e v - e l v i a t h e o i l fi l l e r c a p , u s i n g
the type of oil suited to your
engine.
A = max.
B = min.
Oil level gauge fault
Page 29 of 182
1
30
INSTRUMENT PANEL DISPLAY
After switching on the ignition, two
functions are shown in succession:
- s e r v i c e i n d i c a t o r ,
- total distance recorder (total and trip distances).
Note: the total and trip distances are dis-
played for 30 seconds when the ignition
i s s w i t c h e d o f f , o n o p e n i n g t h e d r i v e r ' s
door, as well as on locking and unlock-
i n g t h e v e h i c l e .
Engine oil level indicator
When the ignition is switched on, the
e n g i n e o i l l e v e l i s i n d i c a t e d o n t h e
instrument panel display for approxi-
mately 7 seconds.
T h i s l e v e l i s i n d i c a t e d a t t h e s a m e
t i m e a s t h e s e r v i c e i n f o r m a t i o n w h i c h
appears on the display located in the
speedometer dial.
Oil level correct
Lack of oil
Flashing indicates a lack
of oil which may damage
the engine.
If the lack of oil is con-
fi r m e d b y c h e c k i n g u s i n g
t h e d i p s t i c k , i t i s i m p e r a t i v e t h a t t h e
l e v e l i s t o p p e d u p . C h e c k t h e o i l l e v e l u s i n g
the dipstick.
I f t h e l e v e l i s c o r r e c t , t h e
fl a s h i n g i n d i c a t e s a n e n -
g i n e o i l l e v e l g a u g e m a l -
function.
Consult a PEUGEOT dealer.
T h e l e v e l o b s e r v e d o n t h e d i p s t i c k i s
o n l y v a l i d i f t h e v e h i c l e i s p a r k e d o n
l e v e l g r o u n d a n d t h e e n g i n e h a s b e e n
off for more than 15 minutes.
Dipstick
T h e r e a r e 2 l e v e l m a r k s o n t h e
dipstick:
- n e v e r e x c e e d l e v e l A ,
- i n p o s i t i o n B , t o p u p t h e l e v - e l v i a t h e o i l fi l l e r c a p , u s i n g
the type of oil suited to your
engine.
A = max.
B = min.
Oil level gauge fault
Page 30 of 182
1
31
SERVICE INDICATOR
T h i s i s a v i s u a l r e m i n d e r o f w h e n t h e
n e x t s e r v i c e i s d u e . T h i s s e r v i c e i s t o
be carried out according to the manu-
f a c t u r e r ' s s e r v i c i n g s c h e d u l e .
T h e p o i n t a t w h i c h t h e s e r v i c e i s d u e i s
calculated from the last indicator zero
reset. It is determined by two param-
eters:
- t h e d i s t a n c e t r a v e l l e d ,
- the time elapsed since the last s e r v i c e .
Note: the distance remaining before
t h e n e x t s e r v i c e i s d u e m a y b e w e i g h t -
ed by the time factor.
T h e s e r v i c e i n f o r m a t i o n a p p e a r s o n
the display, located in the speedo-me-
ter dial, at the same time as the en-
g i n e o i l l e v e l o n t h e i n s t r u m e n t p a n e l
display.
Operation
As soon as the ignition is switched on
and for 7 seconds, the spanner sym-
b o l i s i n g t h e s e r v i c i n g o p e r a t i o n s i s l i t .
The trip recorder display shows the
d i s t a n c e r e m a i n i n g ( i n r o u n d fi g u r e s )
b e f o r e t h e n e x t s e r v i c e .
Example: 4 , 8 0 0 m i l e s / k m r e m a i n b e -
f o r e t h e n e x t s e r v i c e i s d u e . W h e n t h e
ignition comes on and for 7 seconds
the display indicates:
7 seconds after the ignition is switched
on, the total distance recorder resumes
normal operation and the display
shows the total and trip distances.
The distance remaining before the
next service is less than 500 miles
(1,000 km).
Each time the ignition is switched on
and for 7 seconds, the spanner and
t h e d i s t a n c e fl a s h .
Example: 900 miles/km remain before
t h e n e x t s e r v i c e i s d u e .
When switching on the ignition and for
7 seconds, the display shows:
7 seconds after the ignition is switched
on, the total distance recorder resumes
normal operation and the spanner re-
mains lit.
T h i s i n d i c a t e s t h a t a s e r v i c e s h o u l d b e
carried out shortly. The display shows
the total and trip distances.
Page 31 of 182
1
32
Trip recorder zero reset button
Lighting rheostat button
With the ignition on, press the button
until the zeros appear.
With the headlamps on, press button B to
increase the brightness of the lighting of
the instruments and controls or button A to
reduce it.
As soon as the lighting reaches the required
l e v e l o f b r i g h t n e s s , r e l e a s e t h e b u t t o n .
7 seconds after the ignition is switched
on, the total distance recorder resumes
normal operation and the spanner re-
mains lit. The display shows the total
and trip distances.
Note: the spanner may also be lit if the
t w o - y e a r i n t e r v a l h a s b e e n e x c e e d e d .
Service indicator zero re-set
The service is overdue.
Each time the ignition is switched on
and for 7 seconds, the spanner and
t h e e x c e s s d i s t a n c e fl a s h .
Example: t h e s e r v i c e i s o v e r d u e b y
3 0 0 m i l e s / k m . T h e s e r v i c e s h o u l d b e
c a r r i e d o u t v e r y s h o r t l y .
When the ignition is switched on and
for 7 seconds, the display shows:
Your PEUGEOT dealer carries out this
o p e r a t i o n a f t e r e a c h s e r v i c e .
H o w e v e r , i f y o u c a r r y o u t t h e s e r v i c e
yourself, the re-set procedure is as fol-
lows:
Switch off the ignition,
Press and hold the trip recorder re-
set button,
Switch on the ignition.
The display begins a countdown.
When the display shows "=0" , release
the button; the spanner disappears.
After this operation, if you wish
to disconnect the battery, lock
t h e v e h i c l e a n d w a i t f o r a t l e a s t
fi v e m i n u t e s , o t h e r w i s e t h e z e r o
re-set will not be registered.
Page 32 of 182
1
32
Trip recorder zero reset button
Lighting rheostat button
With the ignition on, press the button
until the zeros appear.
With the headlamps on, press button B to
increase the brightness of the lighting of
the instruments and controls or button A to
reduce it.
As soon as the lighting reaches the required
l e v e l o f b r i g h t n e s s , r e l e a s e t h e b u t t o n .
7 seconds after the ignition is switched
on, the total distance recorder resumes
normal operation and the spanner re-
mains lit. The display shows the total
and trip distances.
Note: the spanner may also be lit if the
t w o - y e a r i n t e r v a l h a s b e e n e x c e e d e d .
Service indicator zero re-set
The service is overdue.
Each time the ignition is switched on
and for 7 seconds, the spanner and
t h e e x c e s s d i s t a n c e fl a s h .
Example: t h e s e r v i c e i s o v e r d u e b y
3 0 0 m i l e s / k m . T h e s e r v i c e s h o u l d b e
c a r r i e d o u t v e r y s h o r t l y .
When the ignition is switched on and
for 7 seconds, the display shows:
Your PEUGEOT dealer carries out this
o p e r a t i o n a f t e r e a c h s e r v i c e .
H o w e v e r , i f y o u c a r r y o u t t h e s e r v i c e
yourself, the re-set procedure is as fol-
lows:
Switch off the ignition,
Press and hold the trip recorder re-
set button,
Switch on the ignition.
The display begins a countdown.
When the display shows "=0" , release
the button; the spanner disappears.
After this operation, if you wish
to disconnect the battery, lock
t h e v e h i c l e a n d w a i t f o r a t l e a s t
fi v e m i n u t e s , o t h e r w i s e t h e z e r o
re-set will not be registered.
Page 34 of 182
1
34
Distance travelled (km or miles)
T h i s i n d i c a t e s t h e d i s t a n c e t r a v e l l e d
since the computer was last set to
zero.
Distance remaining to be travelled (km or miles)
This is the distance remaining to be
t r a v e l l e d t o t h e fi n a l d e s t i n a t i o n . I t i s
e i t h e r c a l c u l a t e d b y t h e n a v i g a t i o n
s y s t e m i f g u i d a n c e i s a c t i v a t e d o r e n -
tered by the user.
If the distance is not entered, dashes
are displayed in place of the digits.
Average speed (km/h or mph)
T h i s i s t h e a v e r a g e s p e e d c a l c u l a t e d
since the computer was last set to
zero (with the ignition on). The routes
"1" and "2" are independ-
e n t b u t h a v e i d e n t i c a l a p p l i c a t i o n .
Route "1" for example allows you to
make daily calculations and route "2"
monthly calculations.
The routes
Zero reset
When the required route is displayed,
press the end of the wipers stalk for
more than two seconds.
Access via the general menu
DT screen
"TRIP" menu
Press the "MENU" or "TRIP" button
to gain access to the general menu.
Select the "Trip computer" applica-
t i o n u s i n g t h e n a v i g a t o r , t h e n c o n fi r m .
T h e " T r i p c o m p u t e r " m e n u o f f e r s v a r i o u s
options:
- Inputting of the distance to be t r a v e l l e d ,
- Warnings log,
- Status of the functions.
Page 44 of 182
3
44
MIRRORS
A u t o m a t i c a l l y a d j u s t a b l e m i r r o r s
for parking
These allow you to see the ground
(kerb, wall...) when carrying out park-
ing manoeuvres in reverse gear. The end of the driver and pas-
senger mirrors is convex in or-
der to reduce the "blind spot"
( a r e a a t e d g e d e fi n e d b y a
dotted line).
As a result, objects observed in the
driver and passenger mirrors are, in
reality, closer than they appear.
This must be taken into account to
judge correctly the distance of vehi-
cles approaching from behind.
Tilting the mirror to the parking
position
Turn control A to the right or to the
left.
Engage reverse gear.
The exterior mirror corresponding to
the side on which you are parking tilts
downwards.
Exterior mirrors
- from outside:
Lock the vehicle using the re-
mote control.
When the vehicle is parked, the exterior
m i r r o r s c a n b e f o l d e d b a c k m a n u a l l y .
Adjustment
Turn knob A to the right or to the
left to select the corresponding
mirror.
Move knob A in all four directions
to adjust.
Folding back the mirrors
e l e c t r i c a l l y
- from inside:
With the ignition on, turn knob A
rearwards.
If the mirrors are folded back using
knob A , they will not unfold when the
vehicle is unlocked using the remote
control. You must turn knob A again. A u t o m a t i c d a y / n i g h t e x t e r i o r
mirrors
These darken automatically depending
on the brightness from the rear.
They are linked with the automatic
day/night interior mirror (see para-
graph "Automatic day/night interior
mirror").
To ensure maximum visibility during
manoeuvres, the mirror clears au-
tomatically when reverse gear is en-
gaged.
Initial setting of the function
Engage reverse gear.
Select and adjust the left and right
mirrors in succession.
These settings will be stored when the
vehicle is locked. Returning the mirror to the normal
position
Change out of reverse gear.
After a few seconds, the glass of the
corresponding mirror resumes its nor-
mal position.
You can deactivate the function by return-
ing control A t o t h e c e n t r a l p o s i t i o n "
Page 45 of 182
3
45
A u t o m a t i c d a y / n i g h t i n t e r i o r mirror Operation
Switch on the ignition and press switch 1 :
- Indicator light 2 lit (switch pressed):
automatic operation.
- Indicator light 2 off: automatic sys-
tem off. The mirror remains at its
most clear.
Special feature
To ensure maximum visibility
during manoeuvres, the mirror
clears automatically when re-
verse gear is engaged.
The interior mirror has two positions:
- day (normal),
- night (anti-dazzle).
To change from one to the other, push
or pull the lever on the lower edge of
the mirror.
STEERING WHEEL HEIGHT
AND DEPTH ADJUSTMENT
This automatically and gradually
changes between the day and night
positions. To prevent dazzling, the
glass of the mirror darkens automati-
cally depending on the intensity of the
light from behind. It clears as the light
(headlamps of following vehicles, sun-
light) decreases, ensuring maximum
visibility.
When the vehicle is stationary, un-
lock the steering wheel by pushing
handle A .
Adjust the height and depth of the
steering wheel.
Lock by pulling handle A fully.