
1010PRACTICAL INFORMATION
122
 The  electrical  system  of  your  
vehicle  is  designed  to  oper-
ate  with  standard  or  optional 
equipment. 
 Before installing other electrical equip-
ment  or  accessories  on  your  vehicle, 
contact a PEUGEOT dealer.  
 PEUGEOT  will  not  accept  responsi- 
bility  for  the  cost  incurred  in  repairing 
your  vehicle  or  for  rectifying  the  mal-
functions  resulting  from  the  installa-
tion  of  accessories  not  supplied  and 
not  recommended  by  PEUGEOT  and 
not  installed  in  accordance  with  its 
instructions,  in  particular  when  the 
combined consumption of all of the ad-
ditional equipment connected exceeds 
10 milliamperes.  
 The  maxi-fuses  provide  additional  
protection  for  the  electrical  systems. 
All  work  must  be  carried  out  by  a 
PEUGEOT dealer.    CHANGING A WINDSCREEN WIPER BLADE   ECONOMY MODE FUNCTION 
 After  the  engine  has  stopped,  certain  
electrical  functions  can  be  used  for  a 
maximum  duration  of  approximately 
one hour, to prevent discharging of the 
battery. 
   A    fl   a t    b a t t e r y    p r e v e n t s    t h e  
engine from starting. 
  As  winter  approaches,  have  your  bat-
tery checked by a PEUGEOT dealer.   If the telephone is being used 
when  economy  mode  starts, 
 i t    w i l l    s t i l l    b e    p o s s i b l e    t o    fi   n i s h  
the call. 
  Placing the wiper blades in the 
maintenance position  
   
    
Less than one minute after switching  
off the ignition, press the windscreen 
wiper stalk down once to position the 
blades  at  the  top  of  the  windscreen 
(maintenance position).   
  Replacing a blade  
   
     Lift  the  arm,  then  unclip  the  blade 
and remove it. 
  
     Fit  the  new  blade  and  fold  down 
the arm.  
 To reposition the blades, switch on the  
ignition  and  operate  the  windscreen 
wiper stalk.       T h i s    p e r i o d    m a y    b e    s i g n i fi   -
cantly  reduced  if  the  battery 
charge is low. 
 Once the hour is over, a message ap-
pears  on  the  multi-function  display 
and  the  active  functions  are  put  on 
standby.  
 These  functions  are  automatically  re- 
activated when the vehicle is started.      

1010PRACTICAL INFORMATION
122
 The  electrical  system  of  your  
vehicle  is  designed  to  oper-
ate  with  standard  or  optional 
equipment. 
 Before installing other electrical equip-
ment  or  accessories  on  your  vehicle, 
contact a PEUGEOT dealer.  
 PEUGEOT  will  not  accept  responsi- 
bility  for  the  cost  incurred  in  repairing 
your  vehicle  or  for  rectifying  the  mal-
functions  resulting  from  the  installa-
tion  of  accessories  not  supplied  and 
not  recommended  by  PEUGEOT  and 
not  installed  in  accordance  with  its 
instructions,  in  particular  when  the 
combined consumption of all of the ad-
ditional equipment connected exceeds 
10 milliamperes.  
 The  maxi-fuses  provide  additional  
protection  for  the  electrical  systems. 
All  work  must  be  carried  out  by  a 
PEUGEOT dealer.    CHANGING A WINDSCREEN WIPER BLADE   ECONOMY MODE FUNCTION 
 After  the  engine  has  stopped,  certain  
electrical  functions  can  be  used  for  a 
maximum  duration  of  approximately 
one hour, to prevent discharging of the 
battery. 
   A    fl   a t    b a t t e r y    p r e v e n t s    t h e  
engine from starting. 
  As  winter  approaches,  have  your  bat-
tery checked by a PEUGEOT dealer.   If the telephone is being used 
when  economy  mode  starts, 
 i t    w i l l    s t i l l    b e    p o s s i b l e    t o    fi   n i s h  
the call. 
  Placing the wiper blades in the 
maintenance position  
   
    
Less than one minute after switching  
off the ignition, press the windscreen 
wiper stalk down once to position the 
blades  at  the  top  of  the  windscreen 
(maintenance position).   
  Replacing a blade  
   
     Lift  the  arm,  then  unclip  the  blade 
and remove it. 
  
     Fit  the  new  blade  and  fold  down 
the arm.  
 To reposition the blades, switch on the  
ignition  and  operate  the  windscreen 
wiper stalk.       T h i s    p e r i o d    m a y    b e    s i g n i fi   -
cantly  reduced  if  the  battery 
charge is low. 
 Once the hour is over, a message ap-
pears  on  the  multi-function  display 
and  the  active  functions  are  put  on 
standby.  
 These  functions  are  automatically  re- 
activated when the vehicle is started.      

1010PRACTICAL INFORMATION
122
 The  electrical  system  of  your  
vehicle  is  designed  to  oper-
ate  with  standard  or  optional 
equipment. 
 Before installing other electrical equip-
ment  or  accessories  on  your  vehicle, 
contact a PEUGEOT dealer.  
 PEUGEOT  will  not  accept  responsi- 
bility  for  the  cost  incurred  in  repairing 
your  vehicle  or  for  rectifying  the  mal-
functions  resulting  from  the  installa-
tion  of  accessories  not  supplied  and 
not  recommended  by  PEUGEOT  and 
not  installed  in  accordance  with  its 
instructions,  in  particular  when  the 
combined consumption of all of the ad-
ditional equipment connected exceeds 
10 milliamperes.  
 The  maxi-fuses  provide  additional  
protection  for  the  electrical  systems. 
All  work  must  be  carried  out  by  a 
PEUGEOT dealer.    CHANGING A WINDSCREEN WIPER BLADE   ECONOMY MODE FUNCTION 
 After  the  engine  has  stopped,  certain  
electrical  functions  can  be  used  for  a 
maximum  duration  of  approximately 
one hour, to prevent discharging of the 
battery. 
   A    fl   a t    b a t t e r y    p r e v e n t s    t h e  
engine from starting. 
  As  winter  approaches,  have  your  bat-
tery checked by a PEUGEOT dealer.   If the telephone is being used 
when  economy  mode  starts, 
 i t    w i l l    s t i l l    b e    p o s s i b l e    t o    fi   n i s h  
the call. 
  Placing the wiper blades in the 
maintenance position  
   
    
Less than one minute after switching  
off the ignition, press the windscreen 
wiper stalk down once to position the 
blades  at  the  top  of  the  windscreen 
(maintenance position).   
  Replacing a blade  
   
     Lift  the  arm,  then  unclip  the  blade 
and remove it. 
  
     Fit  the  new  blade  and  fold  down 
the arm.  
 To reposition the blades, switch on the  
ignition  and  operate  the  windscreen 
wiper stalk.       T h i s    p e r i o d    m a y    b e    s i g n i fi   -
cantly  reduced  if  the  battery 
charge is low. 
 Once the hour is over, a message ap-
pears  on  the  multi-function  display 
and  the  active  functions  are  put  on 
standby.  
 These  functions  are  automatically  re- 
activated when the vehicle is started.