2009 Peugeot 407 display
[x] Cancel search: displayPage 28 of 250
1INSTRUMENTS and CONTROLS
28
TRIP COMPUTER
or
TRIP (Route): access to
the trip computer displays.
Each successive press on the button
located at the end of the wipers stalk
displays different information.
LIGHTING RHEOSTAT
Zero reset
When the required route is displayed,
press the control for more than
two seconds.
With the lights on, press the button
to vary the intensity of the lighting of
the instruments and controls. When
the lighting reaches the minimum
(or maximum) setting, release the
button then press it again to increase
(or reduce) the brightness.
As soon as the lighting is of the required
brightness, release the button.
- the ''vehicle'' tab with:
Page 29 of 250
1INSTRUMENTS and CONTROLS
29
Range
(km or miles)
Current consumption
(l/100 or km/l or mpg)
This is the average quantity of fuel
consumed during the last few seconds.
This shows the distance that can still
be covered with the fuel remaining
in the tank in accordance with the
average consumption over the last
few miles (kilometres).
Distance remaining to be
travelled (km or miles)
Average speed
(km/h or mph) ''TRIP'' (Route) menu
Press the
''MENU'' button to gain access
to the general menu.
Select the ''Trip computer'' or ''Vehicle
diagnostics'' application using the navi-
g a t o r , t h e n c o n fi r m o r p r e s s t h e ''MODE''
button until you gain access to the trip
c o m p u t e r s c r e e n , t h e n c o n fi r m ''OK'' .
The ''Trip computer'' or ''Vehicle diagnostics''
menu offers various options:
- Warnings log,
- Status of the functions,
- Inputting of the distance to be
travelled.
Average consumption
(l/100 or km/l or mpg)
Distance travelled
(km or miles) Warnings log
This summarises the active warning
messages, displaying them on the
multifunction display in succession.
Status of the functions
This summarises the active or inactive
status of the functions present on the
vehicle.
Distance remaining
(km or miles)
When guidance is not activated, this
enables you to enter an approximate
distance to be travelled.
T h i s fi g u r e m a y i n c r e a s e i f
there is a change in the style
of driving or the road surface,
p r o d u c i n g a s i g n i fi c a n t d r o p i n
current consumption.
When the range is less than 20 miles
(30 km), four segments are displayed.
A f t e r fi l l i n g w i t h f u e l , t h e r a n g e i s
displayed when it exceeds 62 miles
(100 km). If horizontal segments are dis-
played for long periods instead
of digits, contact a dealer.
This function is displayed only when
the vehicle is travelling at a speed
greater than 20 mph (30 km/h).
This is the distance remaining to
the destination, either calculated at
any time by the navigation system if
guidance is activated or entered by
the user, minus the distance covered
since the distance was entered.
If digits are missing, dashes are dis-
played in their place.
This is the average fuel consumption
since the computer was last set to zero.
This indicates the distance travelled
since the computer was last set to zero. Access via the general menu
This is the average speed calculated
since the computer was last set to
zero (with the ignition on).
Page 30 of 250
2MULTIFUNCTION DISPLAYS
30
MONOCHROME DISPLAY C AND COLOUR DISPLAY C (WITH PC SOUND)
This displays the following information:
- the time,
- the date,
- the exterior temperature (the value d i s p l a y e d fl a s h e s i f t h e r e i s a r i s k o f
ice),
- t h e a c c e s s e s c h e c k ,
- the vehicle function status messages, displayed temporarily,
- the warning messages,
- the audio functions,
- the trip computer information,
- the vehicle parameters,
- the air conditioning parameters,
- the choice of language. General menu
D e fi n e t h e v e h i c l e p a r a m e t e r s
Permits the activation or deactivation
of certain driving and comfort ele-
ments.
Example: Automatic switching on of
the lights.
Press the "MENU" button to gain ac-
cess to the general menu and select
one of the following functions: Audio
Functions, Trip Computer, Person-
a l i s a t i o n / C o n fi g u r a t i o n a n d A i r C o n d i -
tioning.
Example: display selected on "Audio
Functions".
The " P e r s o n a l i s a t i o n - C o n fi g u r a t i o n "
menu provides access to successive
c o n fi r m a t i o n w i n d o w s .
M a n a g e m e n t o f t h e d i s p l a y s
The "AUDIO" , "TRIP" and "CLIM"
b u t t o n s o n t h e a u d i o e q u i p m e n t k e y -
pad permit displaying in the main win-
dow (on the right).
Example: TRIP C h o i c e o f l a n g u a g e
German, Spanish, French, English,
I t a l i a n , D u t c h , T u r k i s h , P o r t u g u e s e
and Brazilian Portuguese.
Page 31 of 250
2MULTIFUNCTION DISPLAYS
31
D i s p l a y c o n fi g u r a t i o n C h a n g i n g t h e d a t e a n d t i m e Set the parameters one by one, using
t h e n a v i g a t o r , t h e n c o n fi r m b y c l i c k i n g
on "OK" .
From the list displayed, select " D i s p l a y
c o n fi g u r a t i o n " , t h e n c o n fi r m .
From the list displayed, select " S e t t i n g
t h e d a t e a n d t i m e " , t h e n c o n fi r m .
- Brightness, to be adjusted in accor-
dance with a scale between Moon
(-) and Sun (+).
-
Selection of the units of measurement.
- Setting the date and time. Your op- erational zone is displayed on the
screen. Use the navigator to move
from one selection to another.
Y o u r n e w p a r a m e t e r s a r e c o n fi r m e d
one by one, by pressing the naviga-
tor button. All of the parameters are
r e c o r d e d i f y o u c l i c k o n O K , d i s p l a y e d
on the screen.
The ESCape button on the control pad
e n a b l e s y o u t o c h o o s e n o t t o c o n fi r m
your changes.
- Selection of the colours (on colour display C only). From the menu, displayed on the screen,
select the icon
" P e r s o n a l i s a t i o n -
C o n fi g u r a t i o n " using the navigator, then
c o n fi r m .
F o r s a f e t y r e a s o n s , c o n fi g u r a -
tion of the multifunction dis-
plays by the driver must be
carried out when stationary.
Page 32 of 250
2MULTIFUNCTION DISPLAYS
32
D i s p l a y
This menu allows you to set the bright-
ness of the display, the display colour
scheme and the colour of the map
(day/night and auto mode).
V e h i c l e
This menu permits the activation or
deactivation of certain driving and
comfort systems:
- air conditioning (A/C),
- vehicle information,
- access to the vehicle,
- driving assistance,
- l i g h t i n g c o n fi g u r a t i o n ,
- comfort lighting.
U n i t s
This menu permits selection of the
units: temperature (°C or °F) and
c o n s u m p t i o n ( k m / l , l / 1 0 0 , m i l e s a n d
mpg).
S y s t e m
This menu permits restoring of the
f a c t o r y c o n fi g u r a t i o n , d i s p l a y i n g o f t h e
software version and activation of the
scrolling text. F o r s a f e t y r e a s o n s , c o n fi g u r a -
tion of the multifunction dis-
plays by the driver must be
carried out when stationary. COLOUR DISPLAY(WITH PC NAV) "SETUP" menu
Press the SETUP button to gain access
to the "SETUP" menu. This provides
access to the following functions:
- System language,
- Date & Time,
- Display,
- Vehicle,
- Units,
- System.
S y s t e m l a n g u a g e
This menu allows you to select
the language used by the display:
German, English, Spanish, French,
Italian, Dutch, Polish, Portuguese.
D a t e & T i m e
This menu allows you to set the date
and time, the format of the date and
the format of the time (refer to the "Au-
dio and Telematics" section).
This displays the following informa-
tion:
- the time,
- the date,
- the exterior temperature (the value
d i s p l a y e d fl a s h e s i f t h e r e i s a r i s k o f
ice),
- t h e a c c e s s e s c h e c k ,
- the vehicle function status messag- es, displayed temporarily,
- the warning messages,
- the audio functions,
- the trip computer information,
- the air conditioning parameters,
- the satellite navigation system infor- mation.
Page 33 of 250
2MULTIFUNCTION DISPLAYS
33
HIGH DEFINITION COLOUR DISPLAY (WITH PC COM)
This displays the following information:
- the time,
- the date,
- the exterior temperature (the value d i s p l a y e d fl a s h e s i f t h e r e i s a r i s k o f
ice),
- t h e a c c e s s e s c h e c k ,
- the vehicle function status messages, displayed temporarily,
- the warning messages,
- the audio functions,
- the trip computer information,
- the air conditioning parameters,
- the satellite navigation system infor- mation.
General menu D i s p l a y c o n fi g u r a t i o n
Press the "MENU" button to gain ac-
cess to the general menu and select
one of the following functions: Naviga-
t i o n - G u i d a n c e , M a p , T r a f fi c I n f o r m a t i o n ,
A u d i o F u n c t i o n s , T e l e m a t i c s , C o n fi g u r a -
tion, Video, Vehicle Diagnostics and Air
Conditioning. - Choose colour,
- Adjust brightness,
- Adjust date and time,
- Choose units.
D e fi n e t h e v e h i c l e p a r a m e t e r s
Permits the activation or deactivation of
certain driving and comfort elements:
- p e r m a n e n t l o c k i n g o f t h e b o o t o n
the 407 Saloon,
- automatic switching on of the lights,
- automatic "follow-me-home" lighting,
- automatic rear wiping on engaging reverse gear on the 407 SW.
The " C o n fi g u r a t i o n " menu provides
access to the following functions:
- D i s p l a y c o n fi g u r a t i o n ,
- Sound,
- Choice of language,
- D e fi n e t h e v e h i c l e p a r a m e t e r s .
You can connect video equipment
(camcorder, digital camera, ...) to the
t h r e e v i d e o s o c k e t s , l o c a t e d i n t h e
glove box.
Video display is only possible when
stationary.
Select the Video menu from the general
menu:
- "Activate video mode" to activate/deactivate the video,
- "Video parameters" to set the dis- play format, the brightness, the con-
trast and the colours.
P r e s s t h e " E S C " o r " D A R K " b u t t o n t o
exit from video mode.
P r e s s t h e " S O U R C E " b u t t o n s e v e r a l
times in succession to select an audio
source other than that of the video. VIDEO MENU (WITH PC COM)
Page 44 of 250
3COMFORT
44
PROGRAMMABLE HEATING Programming remote control
T h e h e a t i n g s y s t e m p r o g r a m m i n g r e -
mote control consists of the following
b u t t o n s a n d d i s p l a y s :
1. S c r o l l i n g f u n c t i o n s m e n u b u t t o n s .
2. Function indicator lights: clock,
t e m p e r a t u r e , o p e r a t i n g t i m e , p r o -
g r a m m e d t i m e , h e a t e r o p e r a t i o n ,
h e a t i n g m a n a g e m e n t s y m b o l s .
3. D i g i t a l d i s p l a y s : t i m e , t e m p e r a t u r e ,
d u r a t i o n o f o p e r a t i o n , p r o g r a m m e d
t i m e o r l e v e l o f h e a t i n g .
4. O f f b u t t o n .
5. O n b u t t o n . Displaying the functions
If a malfunction of the programma-
ble heating system occurs, contact
a PEUGEOT dealer.
T h e p r o g r a m m a b l e h e a t i n g o p e r a t e s
i n d e p e n d e n t l y o f t h e e n g i n e .
W h e n t h e e n g i n e i s o f f , i t p r e - h e a t s
t h e c o o l a n t c i r c u i t i n o r d e r t o b e n e fi t
f r o m a n o p t i m u m e n g i n e o p e r a t i n g
t e m p e r a t u r e f r o m t h e t i m e t h e e n g i n e
i s s w i t c h e d o n .
T h e p r o g r a m m a b l e h e a t i n g s y s t e m i s
switched on using the long range remote
c o n t r o l . A c t i v a t i o n c a n b e i m m e d i a t e o r
d e f e r r e d b y m e a n s o f a p r o g r a m m i n g
f u n c t i o n .
Displays on the remote control
screen
Press the buttons
1 in succession to
d i s p l a y t h e f u n c t i o n s .
T h e fi r s t p r e s s o f t h e l e f t - h a n d o r r i g h t -
h a n d b u t t o n d i s p l a y s t h e t i m e .
N e x t , t h e l e f t - h a n d b u t t o n p e r m i t s
a c c e s s t o t h e p r o g r a m m i n g t i m e t h e n
t o t h e l e v e l o f h e a t i n g ( C 1 t o C 5 ) .
T h e r i g h t - h a n d b u t t o n p e r m i t s a c c e s s
t o t h e p a s s e n g e r c o m p a r t m e n t
t e m p e r a t u r e t h e n t o t h e d u r a t i o n o f
o p e r a t i o n o f t h e h e a t e r i f i t i s t o b e
s w i t c h e d o n i m m e d i a t e l y .
T h e p a s s e n g e r c o m p a r t m e n t
t e m p e r a t u r e i n f o r m a t i o n i s
o n l y a v a i l a b l e w h e n t h e e n -
g i n e i s o f f .
Page 65 of 250
4ACCESS
62
Deadlocking
This renders the external and internal
door controls inoperative.
Do not operate the deadlocking
function if there is anyone inside
the vehicle.
ACCESS AND STARTING USING THE REMOTE CONTROL KEY
The key
From the driver's door this allows you
to lock or unlock the doors, the boot
a n d t h e f u e l fi l l e r fl a p a n d f o l d a n d u n -
f o l d t h e e x t e r i o r m i r r o r s a n d i n d e p e n -
dently it allows you to open or close the
glove box, lock or unlock the access to
the boot via the rear seats (407 Saloon)
and switch on the ignition.
If one of the doors or the boot is open,
the central locking does not work. Unlocking
Press button C .
T h e d i r e c t i o n i n d i c a t o r s fl a s h r a p i d l y
and the exterior mirrors unfold.
The "Folding of the exterior mirrors"
function can be deactivated by a
PEUGEOT dealer.
Unfolding/folding the key
To unfold or fold the key, press button A .
The remote control ( 0523)
This carries out the same functions as
the key, and partial opening of the boot
(saloon) or rear screen (407 SW), at a
distance.
It is incorporated in the key and carries
out remote locking and unlocking.
Locking
Press button B .
The direction indicators come on for
approximately two seconds and the
exterior mirrors fold.
Press and hold button B to close the
windows and sunroof automatically in
addition to locking. Unlocking and partial opening of
the boot (saloon) or rear screen
(407 SW)
Press and hold button D .
This action also unlocks the doors.
Permanent locking of the boot
(saloon) T h i s f u n c t i o n c a n b e a c t i -
vated or deactivated via the
" p e r s o n a l i s a t i o n - c o n fi g u r a -
t i o n " m e n u a n d " D e fi n e t h e
vehicle parameters" on the
multifunction display.
Press button D o n t h e r e m o t e c o n -
trol key.
This will unlock the boot only.
Using the key
L o c k t h e v e h i c l e ( t h e d i r e c t i o n i n d i -
cators come on for approximately
two seconds).
T u r n i n g t h e k e y a g a i n w i t h i n fi v e
seconds deadlocks the vehicle
(the direction indicators come on
for approximately two seconds).
Note: if the vehicle is locked
and unlocking is activated
inadvertently without a door
being opened within the next
30 seconds, the vehicle will lock
automatically.