2009 Peugeot 308 CC navigation
[x] Cancel search: navigationPage 17 of 294
1
i
20
INSTRUMENTS and CONTROLS
PETROL - DIESEL MANUAL OR AUTOMATIC GEARBOX INSTRUMENT PANELS
Panel grouping together the vehicle
operation indication dials and warning
lights.
5. Small display.
6. Large display.
7. CHECK/display zero reset button.
Starts a manual CHECK.
Resets the function selected to zero (trip distance recorder or service
indicator).
8. Instrument panel lighting button.
Adjusts the brightness of the lighting of the instruments and controls.
Dials
1. Rev counter.
Indicates the speed of rotation of the engine (x 1 000 rpm).
2. Coolant temperature.
Indicates the temperature of the engine coolant (°Celsius).
3. Fuel level.
Indicates the quantity of fuel remain- ing in the tank.
4. Vehicle speed.
Indicates the current speed of the moving vehicle (km/h or mph).
A. Trip distance recorder.
(km or miles)
B. Distance recorder.
(km or miles)
The following two functions are displayed in succession when the
ignition is switched on.
C. Service indicator.
(km or miles) then,
Engine oil level indicator.
Displays
For further information, refer to the
paragraph which relates to the but-
ton or function and its associated
display. The following functions are displayed in
accordance with the selection.
-
Warning lights/CHECK.
-
T y r e u n d e r - i n fl a t i o n d e t e c t i o n .
- Speed limiter/Cruise control.
-
Automatic gearbox.
-
Navigation - Guidance/Trip computer
information.
Page 18 of 294
1
i
21
INSTRUMENTS and CONTROLS
PETROL - DIESEL MANUAL OR AUTOMATIC GEARBOX PC COM 3D INSTRUMENT PANELS
Panel grouping together the vehicle
operation indication dials and warning
lights.
5. Small display.
6. PC Com 3D 16/9 large display.
7. CHECK/display zero reset button.
Starts a manual CHECK.
Resets the function selected to zero (trip distance recorder or service
indicator).
8. Instrument panel lighting button.
Adjusts the brightness of the lighting of the instruments and controls.
Dials
1. Rev counter.
Indicates the speed of rotation of the engine (x 1 000 rpm).
2. Coolant temperature.
Indicates the temperature of the engine coolant (°Celsius).
3. Fuel level.
Indicates the quantity of fuel remaining in the tank.
4. Vehicle speed.
Indicates the current speed of the moving vehicle (km/h or mph).
A. Trip distance recorder.
(km or miles)
B. Distance recorder.
(km or miles)
The following two functions are displayed in succession when the
ignition is switched on.
C. Service indicator.
(km or miles) then,
Engine oil level indicator.
Displays
For further information, refer to the
paragraph which relates to the but-
ton or function and its associated
display. The following functions are displayed in
accordance with the selection.
-
Warning lights/CHECK.
- T y r e u n d e r - i n fl a t i o n d e t e c t i o n .
- Speed limiter/Cruise control.
- Automatic gearbox.
- Navigation - Guidance/Trip computer.
- Vehicle parameters.
Page 19 of 294
1
i
22
INSTRUMENTS and CONTROLS
* According to country.
The instrument panel navigator
associated with the PC Com 3D
General menu
Press button 1 to gain access to the
general menu and select one of the
following functions:
- "Vehicle parameters",
- "Selection of the language",
- "Selection of the units".
Press button 2 or 3 to move on the
screen.
Press button 1 a g a i n t o c o n fi r m t h e
selection. Vehicle parameters
This menu allows you to activate or
deactivate certain driving and comfort
equipment:
- selective unlocking (refer to the
"Accesses" section),
- follow-me-home and welcome lighting (refer to the "Visibility" section),
- ambient lighting (refer to the "Visibility" section),
- daytime lights (refer to the "Visibility" section),
- directional headlamps (refer to the "Visibility" section).
Selection of the language
This menu allows you to select the lan-
guage used by the display: Deutsch,
English, Espanol, Français, Italiano,
Nederlands, Portugues, Türkçe * .
Selection of the units
This menu allows you to select the units:
temperature (°Celsius or °Fahrenheit)
and consumption (l/100 km, mpg or km/l).
This group of buttons permits:
-
when stationary,stationary c o n fi g u r a t i o n o f
the vehicle's equipment and of the
parameters of the display (languages,
units...),
- while driving
, scrolling of the
active functions (trip computer,
navigation...).
Controls
There are four buttons to control the in-
strument panel 16/9 large display:
1. a c c e s s t h e g e n e r a l m e n u , c o n fi r m
the selection,
2. move up through the menu,
3. move down through the menu,
4. return to the previous screen, exit
from the menu. The general menu and its associated
functions can only be accessed
when stationary, via buttons
1 to 4 .
A message appears on the display,
above a certain speed threshold,
indicating that the general menu
cannot be displayed.
The trip computer displays can
only be accessed while driving, via
buttons 2 and 3 (refer to the "Trip
computer" paragraph).
Page 36 of 294
2
i
39
MULTIFUNCTION DISPLAYS
Displays on the screen
When the screen is unfolded, it displays
the following information automatically
and directly:
- the time,
- the date,
- the altitude,
- the exterior temperature (the value dis- p l a y e d fl a s h e s i f t h e r e i s a r i s k o f i c e ) ,
- the accesses check,
- the warning and vehicle function status messages, displayed temporarily,
- the audio functions,
- the trip computer information,
- the satellite navigation system infor- mation.
DISPLAY (WITH PC NAV) Controls
From the PC Nav control panel, to se-
lect one of the applications:
press the dedicated "RADIO" ,
"MUSIC" , "NAV" , "TRAFFIC" ,
"SETUP" or "PHONE" button to gain
access to the corresponding menu,
turn the navigator to move the selection,
p r e s s t h e n a v i g a t o r t o c o n fi r m t h e
selection,
or
press the "ESC" button to abandon
the current operation and return to
the previous display. For operation of the retractable
display (opening, closing, adjust-
ment of the position, etc.), refer to
the paragraph "Access to the re-
tractable display".
For further details concerning these ap-
plications, refer to the PC Nav part of
the "Audio and Telematics" section.
Page 38 of 294
2
i
41
MULTIFUNCTION DISPLAYS
16/9 HIGH DEFINITION RETRACTABLE COLOUR DISPLAY (WITH PC COM 3D)
Displays on the screen
When the screen is unfolded, it displays
the following information automatically
and directly:
- the time,
- the date,
- the altitude,
- the exterior temperature (the value dis- p l a y e d fl a s h e s i f t h e r e i s a r i s k o f i c e ) ,
- the accesses check,
- the warning and vehicle function status messages, displayed tempo-
rarily,
- the audio functions,
- the telephone and address book in- formation,
- the satellite navigation system infor- mation. Controls
From the PC Com 3D control panel, to
select one of the applications:
press the dedicated "RADIO" ,
"MEDIA" , "NAV" , "TRAFFIC" , "ADDR
BOOK" or "SETUP" button to gain ac-
cess to the corresponding menu,
turn the navigator to move the se-
lection,
p r e s s t h e n a v i g a t o r t o c o n fi r m t h e
selection,
or
press the "ESC" button to abandon
the current operation and return to
the previous display. For operation of the retractable dis-
play (opening, closing, adjustment
of the position, etc.), refer to the
paragraph "Access to the retractable
display".
For further details concerning these ap-
plications, refer to the PC Com 3D part
of the "Audio and Telematics" section.
Page 42 of 294
2
!
i
i
45
MULTIFUNCTION DISPLAYS
When the route required is dis-
played, press the control for more
than two seconds.
Route zero reset
With the monochrome screen C or
the instrument panel large display A few definitions…
When the range falls below 20 miles ( 3 0 k m ) , d a s h e s a r e d i s p l a y e d . A f t e r fi l l -ing with at least 5 litres of fuel, the range is recalculated and is displayed when it exceeds 60 miles (100 km).
If dashes are displayed continu-ously while driving in place of the digits, contact a PEUGEOT dealer.
This function is only displayed from 20 mph (30 km/h).
T h i s fi g u r e m a y v a r y f o l l o w i n g a change in the style of driving or t h e r e l i e f , r e s u l t i n g i n a s i g n i fi c a n t change in the current consumption.
Range
(km or miles)
This indicates the distance which can still be travelled with the fuel remaining in the tank in relation to the average consumption over the last few miles (kilometres) trav-elled.
Current consumption
(l/100 km or km/l or mpg)
This is the average quantity of fuel consumed during the last few seconds.
A v e r a g e c o n s u m p t i o n
(l/100 km or km/l or mpg)
This is the average quantity of fuel consumed since the last trip computer zero reset.
A v e r a g e s p e e d
(km/h or mph)
This is the average speed calculated since the last trip computer zero reset (igni-tion on).
D i s t a n c e t r a v e l l e d
(km or miles)
This indicates the distance travel-led since the last trip computer zero reset.
Distance remaining
to destination
(km or miles)
This is the distance remaining to be tra-
v e l l e d t o t h e fi n a l d e s t i n a t i o n . I t i s e i t h e r
calculated instantly by the navigation
system, if guidance is activated, or en-
tered by the user.
If the distance is not entered, dashes
are displayed in place of the digits.
With the instrument panel PC Com 3D
16/9 large display
When the required route is dis-
played, press the "OK" button on
the navigator, associated with the
PC Com 3D.
Routes "1" and "2" are independent
but their use is identical.
Route "1" permits, for example, daily
calculations, and route "2" monthly
calculations.
Page 184 of 294
169
NAV
0 3
1
2
3
6
5
4
SELECTING A DESTINATION
P r e s s t h e N A V b u t t o n a g a i n o r s e l e c t t h e " N a v i g a t i o n " M e n u f u n c t i o n a n d p r e s s O K t o c o n fi r m .
Select the "Destination input" function a n d p r e s s O K t o c o n fi r m .
Press the NAV button.
Select the letters of the town one by o n e c o n fi r m i n g e a c h t i m e b y p r e s s i n g OK.
Once the country has been selected, t u r n t h e r i n g a n d s e l e c t t h e t o w n f u n c t i o n . P r e s s O K t o c o n fi r m .
" N A V I G A T I O N " M E N U
DESTINATION INPUT
A p r e - s e t l i s t ( b y e n t e r i n g t h e fi r s t f e w l e t t e r s ) o f t h e t o w n s i n t h e A p r e - s e t l i s t ( b y e n t e r i n g t h e fi r s t f e w l e t t e r s ) o f t h e t o w n s i n t h e country selected can be accessed via the LIST butto n ontton on the virtual keypad.
Select the "Address input" function a n d p r e s s O K t o c o n fi r m .
ADDRESS INPUT
T h e l i s t o f t h e l a s t 2 0 d e s t i n a t i o n s a p p e a r s u n d e r t h e " N a v i g a t i o n " T h e l i s t o f t h e l a s t 2 0 d e s t i n a t i o n s a p p e a r s u n d e r t h e " N a v i g a t i o n " Menu function.
The "NAVIGATION" voice commands are listed in section 09.
D u r i n g g u i d a n c e , a l o n g p r e s s o n t h e e n d o f t h e l i g h t s s t a l k r e p e a t s t h e l a s t g u i d a n c e instruction.
Page 219 of 294
204
0 1
1
5
1 0
2
3 4 6
1 3
1 1
9
1 4 1 5
7 8 1 2
1 6
1 . E n g i n e n o t r u n n i n g - Short press: on/off. - L o n g p r e s s : C D p a u s e , m u t e f o r t h e r a d i o . E n g i n e r u n n i n g - S h o r t p r e s s : C D p a u s e , m u t e f o r t h e r a d i o . - L o n g p r e s s : r e i n i t i a l i s a t i o n o f t h e s y s t e m .
2 . Volume adjustment.
3 . A c c e s s t o t h e R A D I O m e n u . D i s p l a y i n g o f t h e l i s t o f s t a t i o n s .
4 . A c c e s s t o t h e M U S I C m e n u . D i s p l a y i n g o f t h e t r a c k s .
6 . A c c e s s t o t h e P H O N E m e n u . D i s p l a y i n g o f t h e c a l l l i s t .
7 . A c c e s s t o t h e M O D E m e n u . S e l e c t i o n o f t h e s u c c e s s i v e d i s p l a y i n g o f : R a d i o , M a p , N A V ( i f n a v i g a t i o n i s i n p r o g r e s s ) , T e l e p h o n e ( i f a c o n v e r s a t i o n i s i n p r o g r e s s ) , T r i p C o m p u t e r . L o n g p r e s s : d i s p l a y i n g o f a b l a c k s c r e e n ( D A R K ) .
8 . Access to the NAVIGATION menu. D i s p l a y i n g o f t h e l a s t d e s t i n a t i o n s .
9 . Access to the TRAFFIC menu. D i s p l a y i n g o f t h e c u r r e n t t r a f fi c a l e r t s .
1 0 . E S C : a b a n d o n t h e o p e r a t i o n i n p r o g r e s s .
1 1 . C D e j e c t .
1 2 . Selection of the previous/next radio station from the list. S e l e c t i o n o f t h e p r e v i o u s / n e x t C D . Selection of the previous/next MP3 directory. S e l e c t i o n o f t h e p r e v i o u s / n e x t p a g e o f a l i s t .
1 3 . Selection of the previous/next radio station. S e l e c t i o n o f t h e p r e v i o u s / n e x t C D o r M P 3 t r a c k . Selection of the previous/next line of a list.
1 4 . Buttons 1 to 6: Selection of the stored radio station. S e l e c t i o n o f t h e C D i n t h e C D c h a n g e r . L o n g p r e s s : s t o r i n g o f t h e c u r r e n t r a d i o s t a t i o n .
1 5 . S D c a r d r e a d e r .
1 6 . D i a l f o r s e l e c t i o n o n t h e d i s p l a y o n t h e s c r e e n a n d a c c o r d i n g to the context of the menu. S h o r t p r e s s : c o n fi r m a t i o n .
F I R S T S T E P S
PC NAV CONTROL PANEL
5 . Access to the SETUP menu. L o n g p r e s s : a c c e s s t o t h e G P S c o v e r a g e a n d t h e demonstration mode.
3 - 4 L o n g p r e s s : a c c e s s t o t h e s e t t i n g s : f r o n t / r e a r a n d l e f t / r i g h t balance, bass/treble, equalizer, loudness, automati c volume a d j u s t m e n t , i n i t i a l i s e t h e s e t t i n g s .