10
i
!
!
!
1 3 6
PRACTICAL INFORMATION
Risk of electrocution
X e n o n b u l b s ( D 1 S - 3 5 W ) m u s t b e
r e p l a c e d b y a P E U G E O T d e a l e r .
CHANGING A BULB
Procedure for replacing a faulty bulb with
a n e w b u l b w i t h o u t t h e u s e o f t o o l s . Model with halogen lights
1. Direction indicators
(PY 21 W amber).
2. Dipped headlamps (H7
-
55 W).
3. Main beam headlamps
(H1
-
55 W).
4. Daytime/side lights (P21/5 W).
5. Fog lamps (H8
-
35 W).
1. Direction indicators
(PY 21 W SV silver).
2. Dipped/main beam headlamps
(D1S-35 W).
3. Additional main beam
headlamps (H1-55 W).
4. Daytime/side lights (P21/5 W).
5. Fog lamps (H8-35 W).
Model with xenon lights and
directional headlamps
I n s o m e c l i m a t i c c o n d i t i o n s ( e . g .
l o w t e m p e r a t u r e o r h u m i d i t y ) , t h e
presence of misting on the internal
s u r f a c e o f t h e g l a s s o f t h e h e a d -
lamps and rear lamps is normal;
i t d i s a p p e a r s a f t e r t h e l a m p s h a v e
b e e n o n f o r a f e w m i n u t e s .
T h e h e a d l a m p s a r e fi t t e d w i t h p o l y -
c a r b o n a t e g l a s s w i t h a p r o t e c t i v e
c o a t i n g :
do not clean them using a dry
or abrasive cloth, nor with a
detergent or solvent product,
u s e a s p o n g e a n d s o a p y w a t e r ,
when using a high pressure
w a s h e r o n p e r s i s t e n t m a r k s , d o
not direct at the lamps or their
o u t l i n e s f o r t o o l o n g , s o a s n o t
to damage their coating and
t h e i r s e a l s .
Do not touch the bulb directly
w i t h y o u r fi n g e r s , u s e l i n t - f r e e
c l o t h s .
Changing a halogen bulb should
only be done after the headlamp
has been switched off for a few
m i n u t e s ( r i s k o f s e r i o u s b u r n s ) .
I t i s i m p e r a t i v e t o u s e o n l y a n t i -
u l t r a v i o l e t ( U V ) t y p e b u l b s i n o r d e r
n o t t o d a m a g e t h e h e a d l a m p .
Front lights
