176 Self-help, vehicle care
Picture no: 11643s.tif
2. Push the wheel bolt wrench 3 on as far
as possible and slacken the wheel bolts
half a turn.
Picture no: 14724s.tif
3. The jacking points are marked.
On Meriva OPC and OPC Line and
vehicles with sill trims, the jack 3 cannot
be used. It could damage the vehicle.
Picture no: 14762s.tif
4. Set the jack 3 to the required height by
turning the lug by hand. Fit the jack arm
at the front – or rear – so that the jack
claw (arrow in Fig.) grasps the vertical
ridge and engages in the recess in the
ridge. Ensure that the claw is properly
positioned.