
11
In Brief
Picture no: 14727s.tif
Exterior lights Rotate
Press
Lighting 3102, headlamp warning device
3 17.
Picture no: 18475s.tif
Headlamp flash, main beam and
dipped beam Main beam, headlamp flash 3103.
Picture no: 14054h.tif
Turn signals Turn signal lamps 3103.
7
=Off
8 = Parking lamps
9 = Dipped or main beam
> =Fog lamps 3
r = Fog tail lamp
Headlamp flash = Pull stalk towards
steering wheel
Main beam = Push stalk forwards
Dipped beam = Push stalk forwards again
Right = Lever upwards
Left = Lever downwards

13
In Brief
Picture no: 14056h.tif
Operating windscreen and
headlamp washer systems
3:
Pull stalk towards steering wheel
The wipers will swipe for a few strokes.
The headlamp washer system 3 can be
operated when the lights are on.
Windscreen washer system and headlamp
washer system 3 3101, Further
information 3198, 3215.
Picture no: 14057h.tif
Rear window wiper and washer
system Rear window wash and wipe system 3101,
Wiper blades 3215, Car care 3198.
Picture no: 13992s.tif
Heated rear window, heated
exterior mirrors
3
Operated with the Ü button.
Climate control 3114, Heated rear window
3 41.
Wiper on = Push stalk forwards
Wiper off = Pull stalk towards
steering wheel
Washing = Push lever forward and hold

25
In Brief
Picture no: 18604s.tif
Adaptive Headlight (AFL)
3
The system provides better illumination of
the road on corners and curves.
Curve lighting
The light beam pivots based on
steering wheel position and speed
(from approx. 10 km/h).
The headlamps shine at an angle of up
to 15 to the right or left of the direction of
travel.
Cornering light
An additional lamp comes on at certain
steering wheel settings (after rotation
of approx. 90), turn signal settings and
speeds (up to approx. 40 km/h).The lamp beam projects at a 90 angle to
the left or right of the vehicle up to a
distance of approx. 30 metres.
Reversing function
Turning the lights on
, selecting reverse
gear and activating the turn signal
activates the cornering light for the
relevant side. When the turn signal is
switched off, the corn ering light continues
to illuminate for 15 seconds.
Adaptive forward lighting 3 3 106.
Diesel particle filter
3
The diesel particle filter system filters
harmful soot particles out of the exhaust
gases. The system includes a self-cleaning
function that run automatically during
driving. The filter is cleaned by burning off
the soot particles at high temperature.
This process takes place automatically
under set driving conditions and may take
up to 25 minutes. Fuel consumption may
be higher during this period. The emission
of smells and smoke during this process is
normal.
Picture no: 18600S.tif
Under certain driving conditions, e.g. short
journeys, the system may not clean itself
automatically.
If the filter requires cleaning and previous
driving conditions did not enable
automatic cleaning, control indicator !
flashes.
Further instructions 3144.

34 Keys, doors, windows, slide and tilt sunroofAnti-theft alarm system
3
Monitors
zthe doors, luggage compartment,
bonnet.
z the passenger compartment.
z vehicle tilt, e.g. if it is raised.
z the ignition.
Picture no: 15334t.tif
To activate
All doors, windows, sun roof 3, tilting
roof 3 and bonnet must be closed. Press
button p on the radio remote control
again within 10 seconds of locking.
If the ignition was switched on, the driver’s
door must be opened and closed once so
that the anti-theft alarm system can be
switched on.
Picture no: 11575s.tif
Activation without monitoring of
passenger compartment and vehicle tilt
Switch on e.g. if animal s are to be left in the
vehicle.
1. Close tailgate and bonnet.
2. Press button in front of the courtesy lamp
(with ignition off); LED in the hazard
warning lamp button flashes a
maximum of 10 seconds.
3. Close doors.
4. Activate the anti-theft alarm system. The LED lights up. After approx. 10 seconds,
the system is activated. The LED flashes
until the system is deactivated.
9 Warning
Do not use the system if there are people
in the vehicle! The doors cannot be
unlocked from the inside.

72 Seats, InteriorThe curtain airbags will not be triggered in
the event of
zthe ignition is switched off,
z frontal collisions,
z accidents in which the vehicle overturns,
z collisions involving a rear impact,
z collisions involving a side impact outside
the passenger cell.
Picture no: 17885s.tif
Control indicator v for airbag systems
The function of the airbag systems and
seat occupancy recognition 3 is monitored
electronically and indicated via control
indicator v. When the ignition is turned on,
the control indicator comes on for
about 4 seconds. If it does not light, does
not go out after 4 seconds or comes on
during driving, there is a fault in the airbag
systems, the seat occupancy recognition
system 3 or the belt tensioners 361. The
systems may fail to deploy in the event of
an accident.
Deployed airbags are indicated by
continuous illumination of v. The system’s integrated self-diagnostics
allows faults to be quickly remedied.
Seat occupancy recognition
3
The seat occupancy recognition system
deactivates the front and side front
passenger airbags if the front passenger
seat is unoccupied or an Opel child
restraint system with transponders 3 has
been fitted to the front passenger seat. The
curtain airbag system 3 remains activated.
The control indicator for seat occupancy
recognition
y is located in the courtesy
lamp. If this control indicator
y illuminates
for approx. 4 seconds after the ignition is
switched on, the vehicle is equipped with
seat occupancy recognition 373,
Fig. 12097 S.
If an Opel child restraint system with
transponders 3 is fitted, this control
indicator
y lights permanently after the
ignition is switched on as soon as the
system has detected the child restraint
system. Only then may the child restraint
system with transponders 3 be used on the
passenger seat.
9 Warning
Keep the area in which the airbag
inflates clear of obstructions.
9 Warning
Have the cause of the fault remedied
immediately by a workshop.

82 Instruments, ControlsInstruments, ControlsControl indicators ................................ 82
Instrument display ............................... 87
Information display ............................. 90
Warning buzzers.................................. 100
Windscreen wipers ............................... 100
Picture no: 17876s.tif
Control indicators The control indicators described here are
not present in all vehicles. The description
applies to all instrument versions.
The colours of the control indicators mean:
Picture no:
X
Seat belt 3
Control indicator lights up red.
This comes on after turning on the ignition
(with warning tone) until the seat belt is
done up.
Fasten seat belt 362. B
Adaptive headlamp 3 (AFL)
Control indicator lights up and/or flashes
yellow.
Lamps
Fault in system. Contact a workshop for
assistance.
z
Red
Danger, important reminder.
z Yellow
Warning, information, fault.
z Green
Switch-on confirmation.
z Blue
Switch-on confirmation.

83
Instruments, Controls
Picture no: 18385s.tif
Flashes
System converted to symmetrical dipped
beam.
Control indicator
B
flashes for
approximately 4 seconds after the ignition
is switched on as a reminder that the
system has been converted 3110.
AFL 3106.
>
Fog lamps 3
Control indicator lights up green.
This comes on when the front fog lamps
are switched on 3103.
Picture no:
A
Engine electronics, transmission
electronics, immo biliser, diesel fuel filter 3
Control indicator lights up and/or flashes
yellow.
It illuminates for a few seconds when the
ignition is switched on.
Illuminates when the engine is running
Fault in engine electronics or transmission
electronics. Electr onics switches to
emergency running program, fuel
consumption may increase and driveability
of vehicle may be affected 3143. If the
fault is still there when the engine is started
again, contact a workshop for assistance.
For vehicles with diesel engine, the diesel
fuel filter may need to be drained of water
3 212.
Flashes when the ignition is onFault in the electronic immobiliser system;
the engine cannot be started 327. Z
Exhaust emission
Control indicator lights up and/or flashes
yellow.
It illuminates when the ignition is switched
on and goes out shortly after the engine
starts.
Illuminates when the engine is running
Fault in emission control system. The
permissible emission limits may be
exceeded. Contact a workshop for
assistance immediately.
If it flashes when the engine is runningFault that could lead to catalytic converter
damage. Ease up on the throttle until the
flashing stops 3143. Seek the immediate
assistance of a workshop. v
Airbag systems 3, Belt tensioners
Control indicator lights up red.
Illuminates when the engine is runningFault in zone of airbag system or belt
tensioners 361, 372.

84 Instruments, Controls
Picture no: 17876s.tif
I
Engine oil pressure
Control indicator lights up red
It illuminates when the ignition is switched
on and goes out shortly after the engine
starts.
Illuminates when the engine is running
1. Depress clutch.
2. Move gearshift lever to neutral, or with
manual transmissi on automated 3 place
selector lever in N.
Picture no:
3. Move out of the flow of traffic as quickly
as possible without impeding other
vehicles.
4. Switch off ignition.
Contact a workshop for assistance.
Caution
Engine lubrication may be interrupted.
This may result in damage to the engine
and/or locking of the drive wheels.
9 Warning
When the engine is off, considerably
more force is needed to brake and steer.
Do not remove key until vehicle has
come to a standstill, otherwise the
steering column lock could engage
unexpectedly.
O
Turn signal lamps
Control indicator flashes green.
The control indicator flashes if a turn signal
or the hazard warning flashers are
activated.
Rapid flashing: failure of a direction
indicator lamp or associated fuse.
Change bulbs 3 185. Fuses 3182.
C
Main beam
Control indicator lights up blue.
It is illuminated when main beam is on and
during headlamp flash 311, 3102.
j
Automatic transmission 3, start engine.
Control indicator lights up yellow.
The engine can only be started if the foot
brake is depressed. If the foot brake is not
depressed, the control indicator illuminates
3 130.