2009 NISSAN VERSA HATCHBACK Spark

[x] Cancel search: Spark

Page 133 of 305

NISSAN VERSA HATCHBACK 2009 1.G Owners Manual FUEL-FILLER CAP
The fuel-filler cap is a ratcheting type. Turn the
cap counterclockwise to remove. To tighten, turn
the cap clockwise until ratcheting clicks are
heard.
Put the fuel-filler cap on the

Page 219 of 305

NISSAN VERSA HATCHBACK 2009 1.G Owners Manual 4. Lower the vehicle slowly until the tire
touches the ground. Then, with the wheel
nut wrench, tighten the wheel nuts securely
in the sequence illustrated (
A,B,C,D).
Lower the vehicle completely

Page 233 of 305

NISSAN VERSA HATCHBACK 2009 1.G Owners Manual 8 Maintenance and do-it-yourself
Maintenance requirements..........................8-2
General maintenance..............................8-2
Explanation of general maintenance items.........8-2
Mainten

Page 237 of 305

NISSAN VERSA HATCHBACK 2009 1.G Owners Manual When performing any inspection or maintenance
work on your vehicle, always take care to prevent
serious accidental injury to yourself or damage to
the vehicle. The following are general precau-
tions

Page 248 of 305

NISSAN VERSA HATCHBACK 2009 1.G Owners Manual WINDOW WASHER FLUID
RESERVOIR
To check the window washer fluid level, use your
finger to plug the center hole of the cap/tube
assembly, then remove it from the reservoir. If
there is no fluid in the t

Page 251 of 305

NISSAN VERSA HATCHBACK 2009 1.G Owners Manual WARNING
Be sure the ignition switch is in the OFF or
LOCK position before servicing drive belt.
The engine could rotate unexpectedly.
1. Visually inspect the belt for signs of unusual
wear, cuts, or f

Page 281 of 305

NISSAN VERSA HATCHBACK 2009 1.G Owners Manual E–85 fuel
E-85 fuel is a mixture of approximately 85% fuel
ethanol and 15% unleaded gasoline. E-85 can
only be used in a Flexible Fuel Vehicle (FFV) . Do
not use E-85 in your vehicle. U.S. governmen

Page 284 of 305

NISSAN VERSA HATCHBACK 2009 1.G Owners Manual ENGINE
ModelHR16DE MR18DE
TypeGasoline, 4-cycle, DOHC Gasoline, 4-cycle, DOHC
Cylinder arrangement4-cylinder, inline 4-cylinder, inline
Bore x Stroke in (mm) 3.071 x 3.291 (78.0 x 83.6) 3.307 x 3.192
Page:   1-8 9-16 next >