2009 NISSAN PATHFINDER key

[x] Cancel search: key

Page 145 of 471

NISSAN PATHFINDER 2009  Owner´s Manual NOTE:
cDoors lock with the door handle request
switch while the ignition switch is not in the
LOCK position.
cDoors do not lock by pushing the door
handle request switch while any door is
open. Howeve

Page 146 of 471

NISSAN PATHFINDER 2009  Owner´s Manual cWhen the Intelligent Key is placed in-
side the glove box or a storage bin.
cWhen the Intelligent Key is placed in-
side the door pockets.
cWhen the Intelligent Key is placed in-
side or near metalli

Page 147 of 471

NISSAN PATHFINDER 2009  Owner´s Manual The interior light can be turned off without waiting
for 30 seconds by performing one of the follow-
ing operations:
cPlacing the ignition switch in the ON posi-
tion.
cLocking the doors with the remo

Page 148 of 471

NISSAN PATHFINDER 2009  Owner´s Manual CAUTION
After locking the doors using the Intelli-
gent Key, be sure that the doors have been
securely locked by operating the door
handles.
Unlocking doors
1. Push thebutton on the Intelligent Key.
2

Page 149 of 471

NISSAN PATHFINDER 2009  Owner´s Manual Using the panic alarm
If you are near your vehicle and feel threatened,
you may activate the panic alarm to call attention
by pushing and holding the
button on the
Intelligent Key forlonger than 0.5 s

Page 150 of 471

NISSAN PATHFINDER 2009  Owner´s Manual The hazard warning lights will flash once and the
horn will sound once to confirm that the horn
beep feature has been reactivated.
Deactivating the horn beep feature does not si-
lence the horn if the

Page 151 of 471

NISSAN PATHFINDER 2009  Owner´s Manual TROUBLESHOOTING GUIDE
Verify the location of all Intelligent Keys that are
programmed for the vehicle. If another Intelligent
Key is in range or inside the vehicle, the vehicle
system may respond diff

Page 152 of 471

NISSAN PATHFINDER 2009  Owner´s Manual WARNING
Radio waves could adversely affect elec-
tric medical equipment. Those who use a
pacemaker should contact the electric
medical equipment manufacturer for the
possible influences before use.
Th