Black plate (142,1)
Model "R35-D" EDITED: 2008/ 5/ 20
To activate or deactivate the automatic door lock
system, perform the following procedure:
1. Close all doors.
2. Push the ignition switch to the ON position.
3. Within 20 seconds, push and hold thepower door lock switch:
.to the LOCK position for more than 5
seconds to enable or disable the auto-
matic lock function, or
. to the UNLOCK position for more that 5
seconds to enable or disable the auto-
matic unlock function.
4. When activated, the hazard indicator will flash twice. When deactivated, the hazard
indicator will flash once.
5. The ignition switch must be turned OFF and ON again between each setting change.
LOCKING WITH MECHANICAL KEYThe driver’s door will be locked or unlocked
using the mechanical key.
1. Press the rear end of the driver’s outside
door handle
*1
to lift up the front end
*2.
2. With the outside door handle lifted up, usethe mechanical key and turn the key cylinder
cap
*A
counterclockwise to remove.
3-6
Pre-driving checks and adjustments
, Q I R U P D W L R Q 3 U R Y L G H G E \
