2009 Mercury Mariner parking brake

[x] Cancel search: parking brake

Page 200 of 312

Mercury Mariner 2009  Owners Manuals Parking brake
Apply the parking brake whenever
the vehicle is parked. To set the
parking brake, press the parking
brake pedal down until the pedal
stops.
The BRAKE warning lamp in the
instrument clust

Page 201 of 312

Mercury Mariner 2009  Owners Manuals Pull the release lever to release the
brake. Driving with the parking
brake on will cause the brakes to
wear out quickly and reduce fuel
economy.
ADVANCETRACWITH ROLL STABILITY CONTROL™ (RSC)
STAB

Page 208 of 312

Mercury Mariner 2009  Owners Manuals WARNING:Vehicles with a higher center of gravity such as
utility vehicles and trucks handle differently than vehicles with a
lower center of gravity. Utility vehicles and trucks arenotdesigned for
cor

Page 209 of 312

Mercury Mariner 2009  Owners Manuals 2. Using a screwdriver or similar
tool, carefully pry out the small
Brake Transmission Shift Interlock
(BTSI) cover cap located to the
right of the gearshift lever.
3. Insert a screwdriver or similar

Page 210 of 312

Mercury Mariner 2009  Owners Manuals transmission operation. Additionally, whenever the battery is
disconnected or a new battery installed, the strategy must be relearned.
Understanding the gearshift positions of the 6–speed automatic

Page 215 of 312

Mercury Mariner 2009  Owners Manuals If your vehicle goes off the edge of the pavement
•If your vehicle goes off the edge of the pavement, slow down, but
avoid severe brake application, ease the vehicle back onto the
pavement only afte

Page 216 of 312

Mercury Mariner 2009  Owners Manuals WARNING:If the parking brake is fully released, but the brake
warning lamp remains illuminated, the brakes may not be
working properly. See your authorized dealer.
WARNING:Do not spin the wheels at ov

Page 228 of 312

Mercury Mariner 2009  Owners Manuals If the battery has been disconnected and reconnected, refer to the
Batterysection of theMaintenance and Specificationschapter.
The high-current fuses are coded as follows.
Fuse/Relay
LocationFuse Amp
Page:   < prev 1-8 9-16 17-24 25-32 next >