2009 Mercury Mariner Hybrid oil change

[x] Cancel search: oil change

Page 3 of 333

Mercury Mariner Hybrid 2009  Owners Manuals Maintenance and Specifications 270
Engine compartment 272
Engine oil 275
Battery 278
Engine Coolant and Motor/Electronics Coolant 280
Fuel information 286
Air filter(s) 301
Part numbers 303
Maintenanc

Page 12 of 333

Mercury Mariner Hybrid 2009  Owners Manuals Question Answer
How far can I go in Electric Drive
if I run out of gas?Running out of gas is not
recommended. However, you may
be able to go about one mile,
driving at 30 mph (48 km/h), if the
battery

Page 79 of 333

Mercury Mariner Hybrid 2009  Owners Manuals Instantaneous fuel economy (if equipped)
Select this function from the INFO
menu to display your instantaneous
fuel economy. This will display your
fuel economy as a bar graph ranging
from
poor econom

Page 80 of 333

Mercury Mariner Hybrid 2009  Owners Manuals System check
Selecting this function from the
SETUP menu causes the message
center to cycle through each of the
systems being monitored. For each
of the monitored systems, the
message center will indi

Page 81 of 333

Mercury Mariner Hybrid 2009  Owners Manuals Note:Oil life start value of 100% equals 10,000 miles [16,000 km] or
12 months. For example, setting oil life start value to 60% sets the oil
life start value to 6,000 miles (10,000 km) and 219 days.

Page 83 of 333

Mercury Mariner Hybrid 2009  Owners Manuals Warnings Status
Driver door ajar Warning cannot be reset
Passenger door ajar
Rear left door ajar
Rear right door ajar
Stop safely now Warning returns after 10 minutes if
condition still exists
High en

Page 85 of 333

Mercury Mariner Hybrid 2009  Owners Manuals LOW TIRE PRESSURE— Displayed when one or more tires on your
vehicle have low tire pressure. Refer toInflating your tiresin theTires,
Wheels and Loadingchapter.
TIRE PRESSURE MONITOR FAULT— Display

Page 277 of 333

Mercury Mariner Hybrid 2009  Owners Manuals 3. Recheck the engine oil level. Make sure the oil level is not above the
full mark on the engine oil level dipstick.
4. Install the dipstick and ensure it is fully seated.
5. Fully install the engine
Page:   1-8 9-16 17-24 next >