2009 MERCEDES-BENZ SLR trunk release

[x] Cancel search: trunk release

Page 8 of 426

MERCEDES-BENZ SLR 2009 R199 Owners Manual ContentsAnti-theft systems................................  93
Immobilizer.....................................  93
Anti-theft alarm system ..................  93
Tow-away alarm ......................

Page 32 of 426

MERCEDES-BENZ SLR 2009 R199 Owners Manual 32 At a glanceCenter consoleLower part
Item
Page
1
Exterior rear view mirror 
adjustment
44
2
Remote trunk opening switch
102
3
Tow-away alarm off button
95
4
Release button for storage 
compartment u

Page 93 of 426

MERCEDES-BENZ SLR 2009 R199 Owners Manual 93 Safety and Security
Anti-theft systems
Anti-theft systems
Immobilizer
The immobilizer prevents unauthorized 
persons from starting your vehicle.
When leaving the vehicle, always take the 
SmartKey

Page 102 of 426

MERCEDES-BENZ SLR 2009 R199 Owners Manual 102 Controls in detailLocking and unlocking
Opening the trunk
Opening the trunk from the outside
A minimum height clearance of 
5.5 ft (1.66 m) is required to open the 
trunk lid.
The handle is locate

Page 103 of 426

MERCEDES-BENZ SLR 2009 R199 Owners Manual 103 Controls in detail
Locking and unlocking
The switch is located on the lower part of 
the center console.
1Remote trunk opening switch
Press switch1 until the trunk lid 
unlocks and opens slightly

Page 104 of 426

MERCEDES-BENZ SLR 2009 R199 Owners Manual 104 Controls in detailLocking and unlockingTrunk emergency release
The emergency release button is located 
on the inside of the trunk lid.
With the emergency release button, the 
trunk can be opened

Page 201 of 426

MERCEDES-BENZ SLR 2009 R199 Owners Manual 201 Controls in detail
Open air
Closing the soft top
Switch on the ignition.

Press and hold button4, until the 
electrical closing process has been 
completed.
While the soft top is closing, the K

Page 202 of 426

MERCEDES-BENZ SLR 2009 R199 Owners Manual 202 Controls in detailOpen air
Press on releases2 in direction of the 
arrow and pull wind screen1 out 
upwards.
Installing
1Mounting
2Recess

Insert mountings1 into recesses2. 
The mountings must a
Page:   1-8 9-16 next >