2009 MAZDA MODEL MX-5 MIATA Owners Manual

Page 129 of 444

MAZDA MODEL MX-5 MIATA 2009  Owners Manual Black plate (129,1)
qModification and Add-On
Equipment
Mazda cannot guarantee the immobilizer
systems operation if the system has been
modified or if any add-on equipment has
been installed.
CAUTION

Page 130 of 444

MAZDA MODEL MX-5 MIATA 2009  Owners Manual Black plate (130,1)
CAUTION
When starting the engine do not
allow the following, as the engine
may not start due to the electronic
signal from the ignition key not being
transmitted correctly.
ØA key

Page 131 of 444

MAZDA MODEL MX-5 MIATA 2009  Owners Manual Black plate (131,1)
Declaration of Conformity
Knowing Your Mazda
Security System
3-69
MX-5_8Z78-EA-08K_Edition1 Page131
Thursday, October 23 2008 1:53 PM
Form No.8Z78-EA-08K

Page 132 of 444

MAZDA MODEL MX-5 MIATA 2009  Owners Manual Black plate (132,1)
qOperation
Arming
The system is armed when the ignition
switch is turned from the ON to the ACC
or LOCK position.
The security indicator light in the
instrument cluster flashes eve

Page 133 of 444

MAZDA MODEL MX-5 MIATA 2009  Owners Manual Black plate (133,1)
Theft-Deterrent Systemí
If the theft deterrent system detects an
inappropriate entry into the vehicle, which
could result in the vehicle or its contents
being stolen, the alarm al

Page 134 of 444

MAZDA MODEL MX-5 MIATA 2009  Owners Manual Black plate (134,1)
NOTE
Locking the doors with the inside door-lock
knob will not arm the system.
qTo Turn off an Armed System
An armed system can be turned off by any
one of the following methods:
l

Page 135 of 444

MAZDA MODEL MX-5 MIATA 2009  Owners Manual Black plate (135,1)
Steering Wheel
WARNING
Never adjust the steering wheel while
the vehicle is moving:Adjusting the steering wheel while
the vehicle is moving is dangerous.
Moving it can very easily

Page 136 of 444

MAZDA MODEL MX-5 MIATA 2009  Owners Manual Black plate (136,1)
2. Depress the mirror switch in theappropriate direction.
Mirror switchSelector switch
Outside mirror
After adjusting the mirror, lock the control
by placing the selector switch in