2009 Lancia Musa reset

63
SAFETY
DEVICES
STARTING
AND
DRIVING
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
MAINTENANCE
AND CARE
TECHNICALSPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
DIRECTION INDICATORS
fig. 67
Push the stalk to (stable) position:
❒up (position 1): right-hand indica-
tor ON;
❒down (position 2): left-hand indi-
cator ON.
Warning light
ForDstart flashing
on the instrument panel.
Indicators are switched off automati-
cally when the steering wheel is
straightened.
If you want the indicator to flash
briefly to show that you are about to
change lane, move the stalk up or
down without clicking into position
(unstable position). When released,
the stalk will return to its home posi-
tion.AUTOMATIC LIGHT SENSORS
(dusk sensor) (where provided)
This sensor detects any changes in the
external brightness according to the
sensitivity of the set light level: the
higher the sensitivity, the lower the
amount of external light needed to
switch the lights on. The sensitivity of
the dusk sensor is adjusted by means
of the “Setup menu” on the “Multi-
functional Display”.
Activation
Rotate the knurled ring in position
2A
fig. 69as to cause automatic switch-
ing on of the side/tail lights and low
beam lights simultaneously depend-
ing on the external brightness. “FOLLOW ME HOME”
DEVICE fig. 68
This function allows the illumination
of the space in front of the car for a
preset period of time.
Activation
With the ignition key on STOPor re-
moved, pull the stalk towards the
steering wheel within 2 minutes from
when the engine is turned off.
At each single movement of the stalk,
the time in which the lights stay on is
extended by 30 seconds up to maxi-
mum 210 seconds. After this time, the
lights go off automatically.
fig. 67L0D0071mfig. 68L0D0070mfig. 69L0D0072m
038-094 MUSA 1ed GB 11-07-2008 14:10 Pagina 63

72
SAFETY
DEVICES
STARTING
AND
DRIVING
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
MAINTENANCE
AND CARE
TECHNICALSPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
INERTIAL FUEL
CUT-OFF SWITCH
It is located in the bottom, near the
passenger side pillar; to access it, re-
move the carpet. It trips in the event
of a collision cutting the fuel supply
off; as a consequence, the engine turns
off.
When the switch trips, the instrument
panel warning light
èturns on and
the relevant message (where pro-
vided) is displayed on the reconfig-
urable multifunctional display.
Carefully inspect the car to ensure
that there are no fuel leaks, e.g. from
the engine compartment, under the
car or near the tank.
If, after a crash, you smell
fuel or see leaks from the
fuel system, do not reset the switch
to avoid fine risk.
WARNING
fig. 84L0D0388m
If no fuel leaks are detected and the
car can start, press button A-fig. 84
in order to reactivate the fuel feeding
system and turn the lights on.
After a crash, turn the ingition key to
STOPto avoid draining the battery.
038-094 MUSA 1ed GB 11-07-2008 14:10 Pagina 72

87
SAFETY
DEVICES
STARTING
AND
DRIVING
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
MAINTENANCE
AND CARE
TECHNICALSPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
The system also has a diagnostic con-
nector that can be interfaced with ap-
propriate tools, which makes it possi-
ble to read the error codes stored in
the control unit, together with a series
of specific parameters for engine op-
eration and diagnosis. This check can
also be carried out by the traffic po-
lice.
IMPORTANT After eliminating the
problem, to check the system com-
pletely, Lancia Dealerships are obliged
to run a bench test and, if necessary,
road tests which may also call for a
long journey.Sound system installation
The sound system shall be installed in
the space occupied by the central odd-
ment compartment, here you will find
the preset cables. To remove the odd-
ment compartment press the retain-
ing devices in the points shown in the
figure.SOUND SYSTEM
(where provided)
As regards the operation of the CD or
CD MP3 sound system, see the dedi-
cated Supplement attached to this
Owner Handbook.
PRESETTING SYSTEM
(where provided)
The system consists of:
❒sound system power wires
❒front and rear speaker leads
❒aerial power wire
❒2 tweeters on front door pillars
(30W max power each);
❒2 mid-woofers on front doors
(165 mm diameter, 30W max
power each);
❒2 full-range speakers on back
doors (165 mm diameter, 30W
max power each); Go to a Lancia Dealership as
soon as possible if warning
lightUeither does not light
up when the key is turned to
MAR or if while travelling the warn-
ing light comes on either steady or
blinking (along with a message on the
multifunctional display). The opera-
tion of warning light Umay be
checked by the traffic police using
specific devices. Follow the laws in
force in the country where you are
driving.
fig. 118L0D0120m
It is advisable to have the
sound system and the infer-
ence suppression filter in-
stalled at a Lancia Dealer-
ship.
038-094 MUSA 1ed GB 11-07-2008 14:10 Pagina 87

120
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
MAINTENANCE
AND CARE
TECHNICALSPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
SAFETY
DEVICES
STARTING
AND
DRIVING
The weight of the trailer on the car tow
hook reduces of the same value the load
capacity of the car. Consider the weight
of the car at full load, including acces-
sories and luggage to make sure you do
not exceed the maximum towable
weight (shown on the log book).
Respect the speed limits specific for
each country for vehicles towing trail-
ers. In all cases, the top speed must
not exceed 100 km/h.
The ABS with which the car
is equipped will not control
the braking system of the trailer.
Take specific care when travelling on
slippery roads.
WARNING
Never modify the braking
system of the car to control
the trailer brake. The trailer brak-
ing system must be fully indepen-
dent from the hydraulic system of
the car.
WARNING
INSTALLING THE
TOW HOOK
The towing device should be fastened
to the body by specialised personnel
according to any additional and/or in-
tegrative information supplied by the
Manufacturer of the device.
The towing device must meet current
regulations with reference to
94/20/EC Directive and subsequent
amendments.
For any version the towing device
used must match the towable weight
of the car on which it is to be in-
stalled.
For the electric connection a unified
connector should be used which is
generally placed on a special bracket
normally fastened to the towing de-
vice, and a special ECU for external
trailer light control shall be installed
on the car. For the electrical connection, 7 or 13
pin 12VDC connection is to be used
(CUNA/UNI and ISO/DIN Stan-
dards). Follow the instructions pro-
vided by the car manufacturer and/or
the tow hitch manufacturer.
An electric brake should be supplied
directly by the battery through a ca-
ble with a cross section of no less than
2.5 mm
2.
IMPORTANT Electric brake or other
device shall be used with running en-
gine.
In addition to the electrical branches,
the car’s electric system can only be
connected to the supply cable for an
electric brake and to the cable for an
internal light, though not above 15W.
For connections use the preset control
unit with battery cable no less than
2.5 mm
2.
113-124 MUSA 1ed GB 10-07-2008 9:37 Pagina 120

131
IN AN
EMERGENCY
MAINTENANCE
AND CARE
TECHNICALSPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
SAFETY
DEVICES
STARTING
AND
DRIVING
USE OF
THE CAR
WARNING
LIGHTS AND
MESSAGES
GLOW PLUG HEATING
(Multijet versions -
amber)
GLOW PLUG HEATING
FAILURE
(Multijet versions - amber)
Glow plug heating
The warning light goes on when the
key is turned to MAR. It goes out as
soon as the glow plugs have reached
the preset temperature. Start the en-
gine as soon as the warning light goes
out.
IMPORTANT At high ambient tem-
peratures the warning light stays on
for an extremely short time.
Glow plug heating failure
The warning light flashes in the event
of a failure in the glow plug heating
system. Go to a Lancia Dealership as
soon as possible.
The display will show the dedicated
message.
m
WATER IN DIESEL
FUEL FILTER (Multijet
versions - amber)
When the ignition key is
moved to MAR, the warning light
turns on and should go off after a few
seconds.
The warning lightcturns on when
there is water in the diesel fuel filter.
The display will show the dedicated
message.
c
The presence of water in the
supply circuit may cause se-
vere damage to the injection
system and irregular engine
operation. If the warning light cgoes
on (with the message on the display
on some versions), go to a Lancia
Dealership as soon as possible to re-
move clogging from the system.
Whenever the warning light comes on
immediately after refuelling, water
may have been introduced in the
tank. In this case, stop the engine im-
mediately and contact a Lancia Deal-
ership.
CAR PROTECTION
SYSTEM FAULT -
LANCIA CODE (amber)
Turning the key to MAR, the
warning light flashes once and then
goes off.
If the warning light stays on with the
ignition key positioned on MAR, a
failure may have occurred (see “Lan-
cia Code system” in section “Dash-
board and controls”).
IMPORTANT Simultaneous turning
on of the warning lights Uand
Yindicates a failure in the Lancia
CODE system.
If the warning light
Yflashes with
the engine running, the car is not pro-
tected by the engine inhibitor device
(see “Lancia Code system” in section
“Dashboard and controls”).
Contact Lancia Dealership to have all
the keys stored.
Y
REAR FOG LIGHTS
(amber)
The warning light comes on
when the fog lights are turned
on.
4
125-134 MUSA 1ed GB 10-07-2008 9:38 Pagina 131