2009 JEEP COMPASS tire pressure

[x] Cancel search: tire pressure

Page 302 of 439

JEEP COMPASS 2009 1.G Owners Manual CAUTION!
•The TPMS has been optimized for the original
equipment tires and wheels. TPMS pressures and
warnings have been established for the tire size
equipped on your vehicle. Undesirable system
op

Page 303 of 439

JEEP COMPASS 2009 1.G Owners Manual •Seasonal temperature changes will affect tire pressure,
and the TPMS will monitor the actual tire pressure in
the tire.
Base System
This is the TPMS warning indicator located in the
instrument clus

Page 304 of 439

JEEP COMPASS 2009 1.G Owners Manual Check TPMS Warnings
The Tire Pressure Monitoring Telltale Light will flash on
and off for 75 seconds and remain on solid when a system
fault is detected. The system fault will also sound a
chime. If t

Page 305 of 439

JEEP COMPASS 2009 1.G Owners Manual 5. Once you repair or replace the original road tire and
reinstall it on the vehicle in place of the compact spare
tire, the TPMS will update automatically and the Tire
Pressure Monitoring Telltale Li

Page 306 of 439

JEEP COMPASS 2009 1.G Owners Manual Tire Pressure Monitoring Low Pressure Warnings
The Tire Pressure Monitoring Telltale Light will illumi-
nate in the instrument cluster and an audible chime will
be activated when one or more of the fo

Page 307 of 439

JEEP COMPASS 2009 1.G Owners Manual graphic display of the pressure value(s) will stop flash-
ing, and the Tire Pressure Monitoring Light will extin-
guish once the updated tire pressure(s) have been re-
ceived. The vehicle may need to

Page 308 of 439

JEEP COMPASS 2009 1.G Owners Manual If the ignition key is cycled, this sequence will repeat,
providing the system fault still exists. If the system fault
no longer exists, the Tire Pressure Monitoring Telltale
Light will no longer flas

Page 309 of 439

JEEP COMPASS 2009 1.G Owners Manual 4. For each subsequent ignition key cycle, a chime will
sound and the Tire Pressure Monitoring Telltale Light
will flash on and off for 75 seconds and then remain on
solid.
5. Once you repair or repla