Also check the combined f use box in
the under-hood f use box.
If something electrical in your
vehicle stops working, the first thing
youshouldcheckforisablownfuse.
Determine f rom the chart on pages
, and , or the diagram on
thefuseboxlidorthefuselabel,
which f use or f uses control that
component. Check those f uses f irst,
but check all the f uses bef ore
deciding that a blown f use is not the
cause. Replace any blown f uses and
check if the device works. Check each of the large f uses in
the under-hood f use box by
looking at the wire inside.
Removing these f uses requires a
Phillips-head screwdriver.
Turn the ignition switch to the
LOCK (0) position. Make sure the
headlights and all other
accessories are of f .
On the under-hood and passenger’s
side interior f use boxes, remove
the cover f rom each f use box. 3.
1.
2. 376 377 378
CONT INUED
Fuses
Checking and Replacing Fuses
T aking Care of t he Unexpect ed
373
FUSE
BLOWN BLOWN
— — y
y
)
y y
2009 Accord Sedan
µ
Thediagramsinthissectiongive
you the dimensions and capacities of
your vehicle and the locations of the
identif ication numbers. It also
includes inf ormation you should
know about your vehicle’s tires and
emissions control systems.
................
Identif ication Numbers .382
Specif ications
...............
(2.4
engine models) .384
Specif ications ...............................
(V6 models) .386
DOT Tire Quality Grading ..........................
(U.S. Vehicles) .388
.................................
Tire Labeling .390
Tire Pressure Monitoring System (TPMS) Required Federal ............................
Explanation .392
.......................
Emissions Controls .394
..
Three Way Catalytic Converter .396
........................
Emissions Testing .397
T echnical Inf ormation
Technical Inf ormation
381
\f—\f—\fy
\fy
)\f
\fy\fy
2009 Accord Sedan
