2009 HONDA ACCORD SEDAN ECU

[x] Cancel search: ECU

Page 319 of 420

HONDA ACCORD SEDAN 2009  Owners Manual (in English) Oil is a major contributor to your 
engine’s perf ormance and longevity.
Always use a premium-grade 5W-20
detergent oil displaying the API
Certif ication Seal. This seal indicates
the oil is energy

Page 326 of 420

HONDA ACCORD SEDAN 2009  Owners Manual (in English) Check the f luid level with the engine 
at normal operating temperature.Park the vehicle on level ground.
Start the engine, let it run until the
radiator f an comes on, then shut
of f the engine. For

Page 327 of 420

HONDA ACCORD SEDAN 2009  Owners Manual (in English) Pour the f luid slowly and caref ully 
so you do not spill any. Clean up
any spill immediately; it could
damage components in the engine
compartment.
Remove the dipstick and check
the f luid level. It

Page 328 of 420

HONDA ACCORD SEDAN 2009  Owners Manual (in English) Check the f luid level with the 
transmission at normal operating
temperature and the vehicle sitting
on level ground.Reinstall the under cover and put the
holding clips back in place. Make
sure the u

Page 334 of 420

HONDA ACCORD SEDAN 2009  Owners Manual (in English) To change the passenger’s side 
bulb, start the engine, turn the
steering wheel all the way to the
lef t, and turn of f the engine. To
change the driver’s side bulb, turn
the steering wheel to the

Page 352 of 420

HONDA ACCORD SEDAN 2009  Owners Manual (in English) ´
See page f or DOT tire quality 
grading inf ormation, and page f or tire size inf ormation. Tires marked ‘‘M S’’ or ‘‘All
Season’’ on the sidewall have an all-
weather tread design

Page 363 of 420

HONDA ACCORD SEDAN 2009  Owners Manual (in English) Put on the spare tire. Put the 
wheel nuts back on f inger-tight,
then tighten them in a crisscross
pattern with the wheel nut wrench
until the wheel is f irmly against
the hub. Do not try to tighten

Page 364 of 420

HONDA ACCORD SEDAN 2009  Owners Manual (in English) Place the flat tire face down in the 
spare tire well. 
Remove the spacer cone f rom the 
wing bolt, turn it over, and put it
back on the bolt.To remove the spacer cone, squeeze
the tabs on the wing b
Page:   < prev 1-10 ... 9-16 17-24 25-32 33-40 41-48 next >