2009 HONDA ACCORD COUPE ad blue

Inst Panel/TPMS/Cruise/Compass
Temperature
GaugeMessage in the Information Display
Check Fuel Cap: Fuel cap is missing or not
properly tightened. Check that the fuel cap
is installed and tightened at least one click.
Temperature Gauge: If the pointer is in the
red zone, turn off the engine immediately, or
as soon as safely possible*.
Instrument Panel Indicators
Indicators should go out shortly after
starting the engine. If an indicator stays on
or comes on while driving, follow the
instructions in the description.
• Red indicators are critical and require immediate attention.
• Amber indicators are urgent and require attention as soon as possible.
• Blue and green indicators are used for general information.
Charging system indicator:
Battery is not being charged; see
dealer as soon as possible.
Low oil pressure indicator: Low
oil pressure; turn the engine off as
soon as safely possible.
Security system indicator: Blinks
when the security system is armed.
Supplemental restraint system (SRS) indicator:
SRS malfunction; see dealer as soon as
possible.*
Seat belt reminder light: Fasten seat belts.
Parking brake and brake system indicator:
Parking brake on, low brake fluid level.
Door and trunk open monitor: Comes on if the
trunk lid is left open. Will go out after about 3
minutes, even if the lid is not closed.
Malfunction indicator lamp (CHECK engine
light): Engine or emissions system malfunction;
have dealer inspect the vehicle.
Maintenance minder indicator: A scheduled
maintenance is due; stays on if maintenance is
past due.
Fuel gauge/low fuel indicator
Note: It is important to see the Instruments and Controls section in the\
owner’s manual.
09 AccordCoupe:09 Accord Coupe.qxd 6/16/2008 1:41 PM Page 3

HFL/
HomeLink®
Bluetooth® HandsFreeLink®(Navi models)Your vehicle is equipped with Bluetooth
HandsFreeLink (HFL). HFL uses Bluetooth
technology to link your cell phone to your vehicle, and
you can place and receive calls through the audio
system. To use this feature, you need a Bluetooth-
compatible cell phone with the hands-free profile. For
more information (including pairing information), and
a list of compatible cell phones, visit
handsfreelink.honda.com , or call (888) 528-7876.
Tip: The maximum range between your phone and
the vehicle is 30 feet.
HFL TALK button: Activates HFL
(audio system mutes). Press and
release the button, wait for a beep,
then give a voice command in a
clear, natural speaking voice
(without pause). If a voice
command is not given within 3
seconds, the system times out (two
beeps).
HFL BACK button: Use to end a
call, to go back to the previous
command, or to cancel an
operation.HFL DisplayWhen operating HFL, the following appears in
the main and center displays.
Using Voice Control•If HFL does not recognize a command, its
response is “Pardon, please repeat.”
• To hear a list of available options at any time, say “HandsFree help.”
• Many commands can be spoken together. For example, you can say “Dial 123-456-7891.”
• To skip a voice prompt, press the HFL TALK button while HFL is speaking. HFL is then ready
for your next command.
• To end a command sequence, press and hold the HFL BACK button, or press the HFL TALK button
and say “Cancel.” The next time you press the
HFL TALK button, HFL begins from the main
menu.
• Make sure that the airflow from the A/C vents does not interfere with the system microphone in
the ceiling console.
• Close the windows/moonroof.
• If the microphone picks up other voices or if you don’t speak clearly, the system may not
understand your command.
HFL
BUTTONS
09 AccordCoupe:09 Accord Coupe.qxd 6/16/2008 1:41 PM Page 15

Pairing Your PhoneYour Bluetooth-compatible phone must be paired to
HFL before you can make and receive hands-free
calls. To confirm that your phone is Bluetooth-
compatible, visit handsfreelink.honda.com or call
(888) 528-7876. Your phone retailer should also be
able to confirm if your phone is Bluetooth-
compatible.
Making a CallYou can make calls using a phone number, a name
stored in your HFL phone book, or redialing the last
number called. You can talk up to 30 minutes after
removing the key from the ignition switch.
Remember to press the HFL TALK button prior to
each command.
Note: HFL cannot dial a name stored in your phone.
You say: “Call/Dial”
HFL responds: “What name or number would you
like to call/dial?”
You say: “123 456 7890.”
HFL responds: “123 456 7890?”
You say: “Yes” or “Call/Dial”
HFL responds: “Calling/Dialing.”
Tip: To redial the last number called, say “Redial” or
press and hold the HFL TALK button.
Receiving a CallTo answer a call, press the HFL TALK button.
This button also activates the Call Waiting
function on your phone. To decline a call, press
the HFL BACK button.
Transferring a CallYou can transfer your call from HFL to your
phone, and vice versa. In either case, press and
release the HFL TALK button, then say “Transfer.”
Import Phone book Feature(With Navigation)The cellular phone book option allows you to
store up to 1,000 names and 10,000 phone
numbers in the HFL phone book from your
cellular phone book. Using HFL, you can then
automatically dial any name or number in the
phone book. Not all phones have this capability.
For more information, visit
handsfreelink.honda.com , or call
(888) 528-7876.
* Check the owner’s manual for additional information and instructions.
09 Accord Coupe 15ab:ExtraPages.qxd 6/17/2008 2:31 PM Page a15

Navigation/
Voice Control
Entering a Destination Using
Voice Control
No te: Each time you enter a voice
command, press and release the TALK
button. When you hear a beep, say
your command.
1. Say “display menu.” The display changes to the Enter Destination
byscreen.
2. Say “address.”
3. Say “city” (or “change state” if necessary).
* Check the owner’s manual for additional information and instructions.
4. Say the name of the city or say“select current city.”
5. A list of city names appears. Say the number listed next to the
desired city.
6. Say the street name. Do not say the direction (north, south, east, or
west) or type (street, avenue, etc).
7. Say the number listed next to the name of the desired street.
8. Say the street address number as a continuous series. For example,
for the address number 15200, say
“one, five, two, zero, zero, done.”9. The system displays the“Calculate route to” screen. Say
“OK” to display a map of the
route. The plotted route
appears in blue.
Tip: While en route, you can
cancel or change your current
destination or select other options
by saying “display menu.”
09 Accord Coupe InsideBack:09 Accord Coupe.qxd 6/16/2008 1:43 PM Page\
18